Porphis with UK technology equipped with split nozzle engineering 🤯

[@Idk-wtf-it-is]

Damn Trigger, didn’t you just say 5 days ago that you had hit 5K subs, and now 5 days later, 6:05 you’re at 6K? Ya killin em’ homie! Do your thang dog!✌🏼

[@thetriggerman954]

Yeah man I honestly can't believe it. I thought it would be years before I reached this point. God is good 🙏🏼 Thank you Charles 😊

[@Idk-wtf-it-is]

👍

[@kr2513]

You’re at 6000 subs now. Keep it up man

[@thetriggerman954]

I know right we're rocking. Spread the word tell family members to subscribe 🥳🥳 😂😂 thanks man

[@davidduran5745]

Another banger Triggerman, keep up the hard work! 👊

[@thetriggerman954]

Thank you David. Much appreciated ☺️💪🏼

[@Porphis-Group]

Dear TriggerMan, Thank you very much for choosing our products and affirming our products. Very great work. I believe it can help many enthusiasts. PORPHIS GROUP

[@thetriggerman954]

You're more than welcome. Thank you for giving me the opportunity to demonstrate your product. The spray gun appears to be very well built and includes features that I have never seen on a spray gun in my 28 years of spraying professionally. I look forward to doing more demonstrations for you and the near future. God bless ❤️ The Triggerman

[@reynaldorivera743]

Triggerman laying it down smooth 👍👍

[@thetriggerman954]

Reynaldo in the house 💪🏼 thank you brother ❤️

[@robmehner7788]

Masters of branding over there by the Porphis Group.

[@thetriggerman954]

Excellent branding 🥳

[@GregoryGreenSr.-vs4ot]

Brother you crazy funny! Keep it up!❤

[@thetriggerman954]

Me crazy? Me no Loco 😜 thanks Gregory 💪🏼❤️

[@Mikefngarage]

Hey TM.....I sanded my last job with 220 to feather out the old peeling clear......then did a finish with 320 hand sand.....NO SANDING SCRATCHES.....used extra binder in 1st 2 coats of base. Then went into my color over that. This was on a restoration job so I really needed to use heavier paper. Did not prime the whole car either.

[@thetriggerman954]

Okay with all of that being said how did it turn out? Hopefully Goood

[@Mikefngarage]

@@thetriggerman954 yea no sanding scratches. looks nice.....SILVER Too...If you ever do a restoration job that is a good trick. Binder is cheap compared to man hours.

[@thetriggerman954]

@@Mikefngarage my wet bed is similar to that, requires no reducer, I use it like a clear sealer sometimes. Good tip Mike. Thank you 🤜🏼🤛🏼

[@Mikefngarage]

@@thetriggerman954 Yea I do that using intercoat clear. makes the sand scratches go away (finer ones for your blend) speed Kote has a clear blender. But with binder you can fill like 220!!! (not for blend panels NOOOO) and its cheap.I just ad it to the base color. I did this truck with only a quart of real color. Based it with Binder and a cheap autobahn or high tech base with 50% or more binder. No sanding scratch.....Only for the cheap resto jobs. Not for your good stuff.

[@thetriggerman954]

@@Mikefngarage ohh I see I see 🤔

[@vasiliskaradimos]

Triggggggg....We send our love from Greece man..... Super results from your magic hands!

[@thetriggerman954]

Thank you my man God bless 🙏🏼 from the US

[@asksteevies4941]

That’s nice they put your name on it ,,that’s cool

[@thetriggerman954]

Really cool Steevie 😎

[@srautollc6831]

Hey trigger. I own that same gun. Really happy with it. Hard to beat the quality for the price. Try to lower you pressure a bit. It seems to really like lower pressure. Then will have a really good transfer efficiency. Keep up the great vids

[@thetriggerman954]

Yea man the gun sprays pretty good, I did lower the psi on the next job and it performed flawlessly, even my boss was like 👀 so you're right about that. Thank you 💪🏼

[@z32jordan]

Man thank you for your content. I have been painting for less than a year but been in the paint and body game for 13 years. Thanks for passing on some knowledge!

[@thetriggerman954]

You're more than welcome, it's a blessing to be able to help guys learn a trade and feed their family ❤️ wish you all the success on your journey 🙏🏼

[@z32jordan]

@@thetriggerman954 that's exactly it man. Making the most I have ever made being a full-time painter. Thanks again

[@thetriggerman954]

@@z32jordan awesome 🥳🥳🥳🥳🥳

[@joshuaphegley3766]

I'm a new subscriber. Love your videos! I want one of these guns now!

[@thetriggerman954]

Welcome to the channel my man. Very nice gun 🤗💪🏽

[@TheDopeShow81]

Damn.. my head hanging low as i just bought another limited edition sata.. and trigger is ripping into the fan boys... i might own like 10 satas.. but i have a devilbiss too lol. I swear i love it..hahaha.

[@thetriggerman954]

Lmao but you're different. You one down to earth cool dude so you're not in that club 😎💪🏼

[@TheDopeShow81]

Phew! I wanna try some of these guns..

[@thetriggerman954]

@@TheDopeShow81 say what???? You? I'm curious to see what you think about it

[@colorbosscustomautobody8140]

I swear by my Iwata Supernova Pininfarina, but I want to get this gun and try it out too! I got my first ever Sata, with the 4000B digital last year. Had been shooting with nothing BUT Iwata since my airbrush artist days 35 years ago. But this thing looks good! I wonder what the air pressure is recommended. My Supernova runs 23 at the gun and only 10 at the tip. Very little overspray is the result.

[@thetriggerman954]

@@colorbosscustomautobody8140 yeah actually on my second job I lowered the pressure a few psi and it performed much better So I think it runs better on lower pressure although the rep from the company told me that this gun sprays and higher pressure than all the rest of their models

[@mcats8]

Just for them sending you love with a Triggerman edition, I'm going to buy one.

[@thetriggerman954]

Yea man that was alright 🙂 never thought I'd see the day. Even if it's not a high dollar guns still a great feeling. Thank you. I wish I could get a discount code or something for you. But they didn't offer nothing. 🫠

[@HPAcustomriflesandcerakote]

I recently got one of these pŕd-715 mine is blue though. I got it for jobs when i need to put down clear faster than i can with my DV1-C gun. It definitely hammers out clear

[@thetriggerman954]

The 715 is faster than the 717 I have from what I've been told. Good stuff hopefully I can get one to try 🤪

[@jasonmaes6021]

I’m definitely going to try one soon.

[@thetriggerman954]

Let me know what you think 💪🏼

[@TimGriffin-ez9ez]

Really appreciate all your videos. Which pps adaptor did you use for this gun? 👌

[@thetriggerman954]

You're more than welcome. I use Devilbiss Dekup system 👇🏼 amzn.to/4c6AHFM

[@TimGriffin-ez9ez]

Thank you for the link. Will the Devilbiss adapter fit too as I can’t see a prophis adapter. Have a great week

[@thetriggerman954]

@@TimGriffin-ez9ez you're welcome and yes Dekup adapter #10 fits the gun perfect.

[@Sprayedbydre]

I just ordered one myself

[@thetriggerman954]

Ohhhh sh!t now. About to be some wetness going down 😂🥳

[@jameskerry5581]

thanks for the review TM i was thinking about adding one of these into my kit box, defo going to buy one now..... hope you got that 7k bucket hat on order :)

[@thetriggerman954]

You're more than welcome 🤗 next hat will be 10k hopefully this year 🙏🏼🙏🏼

[@3rekoatskustoms929]

Must be a nice gun to compare to the Iwata..

[@thetriggerman954]

It's pretty nice, can't lie. Iwata still my baby though 🍼🤣

[@chuckstewart9375]

Trigger..my main 2 guns..base..Sagola..Clear.. Iwata..I have Vevor..Anif160..really like f160...don't b bias..out of all ur China or budget guns...what's ur pick...Me Personally F160 skull

[@fernandosaldana3665]

@@chuckstewart9375 f160 skull? You meant ani black skull right? I have it too and f160 snake and it’s pretty nice gun!👍🏻

[@travlite8496]

That puts out the perfect amount of factory peel

[@thetriggerman954]

Second job has zero peel. Keep an eye out for the video. I dropped the pressure down a little and I think that was the sweet spot

[@UndergroundPaintKing]

Looking good Triggerman, I might have to get my hands on one 💯💪🏾 another 🔥 job!

[@thetriggerman954]

Thank you Champ 🏆 but that means you would have to do a video on the gun 🤓😂😂😂😂 everyone in the comments I need you guys to tell UPK to drop some videos. 😉

[@UndergroundPaintKing]

@@thetriggerman954 😂 I’ll definitely drop a video on it 💯

[@cll_sr]

I know the difference between Lvlp and Hvlp. But i coulndt understand vs and mp ( porphis spray gun ) ? And what is the "split nozzle " ? is is spray better or less waste paint ? Thanks.

[@JohnWD40TC02]

Hey Trigga!! lovely job on the Tesla, the 717 laid the clear like glass Sir👌as you said these are well made guns the build quality is as good as any gun costing three times the price the only thing we don't know about these is longevity how the seals last but I'm sure they will last years🤔 I was lent the 715 which was the same as yours apart from the tip as it was the normal tip on mine, I also had the 625 and both guns were spot on I had them for a month and didn't want to send them back😭😬😂John UK

[@thetriggerman954]

Lmao dang John they were that good aye? Hopefully the company sends me other models to try 🤭 but I'm starting to miss my high dollar guns. But everyone wants to see the new Budget guns so I have to "participate* 🫠😂

[@JohnWD40TC02]

Yeah it's nice to try these budget guns out but it's even better to get back to the expensive ones, my goto these days seems to be my WS400 Series 2 or the X5500 RP 1.3CC then there is my Fuji MP-V8 and so on...😎I have to many for what I do🤓😂

[@reyjr3608]

Amazing...i might miss it,may i ask your spraygun setting on fluid,fan,and psi setting? Thanks..😄👍

[@EJ1James]

Short one but I want to see more on this gun

[@thetriggerman954]

Yea it was just a quarter panel so couldn't drag it too far I hate to watch a video that has one panel and it's damn near 30 minutes. Too much yapping 🤣😭 next one is a short one too but you can really see the finish on the next vid. True definition of glass 🥳

[@EJ1James]

Yeah just a panel, you clocked in and out on this one can’t wait to see next one

[@larrydurr6064]

That's a very nice gun and a very nice job trigger man

[@thetriggerman954]

Thank you Larry. I appreciate it 💪🏼

[@nickross2423]

Clean again as always!! I'm gonna hafta tell my boss to start buying sum different guns to try!!

[@thetriggerman954]

Can't hurt, some of them will surprise you. They are sure surprise the hell outta me.

[@JStock-id1qi]

Hi TriggerMan, Recently got a Iwata WS400 and the air horn will not line up to the tulip holes. From your video, looks like the Porphis lines up perfectly... Not sure if it even matters on the Iwata since it sprays great with no problems regardless. Love your video's....thanks

[@thetriggerman954]

Man I've had the WS gun for like 13 years this is my first time ever hearing that. I just screw on my air cap and spray. I've never even looked at that. Don't get caught up on that stuff. Just load that sucker up and bang bang bang 💪🏼💪🏼💪🏼 Thank you for watching 🥳

[@Donnelly369]

Nice job triggaman nice blue looking like glass.

[@thetriggerman954]

Thank you Scriby 💪🏼😎

[@colorbosscustomautobody8140]

I'm gonna have to get this. Would go great as a clear gun asking with my Sata 4000B digital

[@thetriggerman954]

Can't go wrong with this one. It's a little beast

[@Supranforever]

What did I say a few days ago, that 6k comin' quick Trigger!!!! Nice looking gun too! Hey what is the cup/bag situation you run?

[@thetriggerman954]

Yes sir going fast 🥳 I use the the Devilbiss Dekup system. Works pretty good.

[@nickcrill7718]

They put your name on it! That’s cool!

[@thetriggerman954]

Yeah man cool AF 😎 ❤️

[@illstplaya84]

just bought the same gun, thanks for the recommendation. Question: which dekups adapter is that? DPC 81? Thanks in advance!

[@thetriggerman954]

No problem man. I think it is #10 adapter

[@timmiller260]

Any buddy now what sikkins paint base uses to activate and thinner i got gal of it at swap met.i like it good need little pointers.

[@christophermix6845]

Oh man trigger. You've got me Wondering if this gun would be better than the sagola 4600 for a show car finish 🤔

[@thetriggerman954]

Man quit playing 😂😂😂 this guy with the jokes 🤭

[@christophermix6845]

@@thetriggerman954I don't know that paint looks real smooth to this rookie here. But I take it still need to save up my money for the sagola? buy once cry once 😉

[@thetriggerman954]

@@christophermix6845 true, only thing I know the Sagola or last you damn near forever This thing no one knows. They could very well last a long time but no one knows. It's a quick fix for some of the spray gun addicts out there 😂

[@christophermix6845]

@@thetriggerman954 well I bet it will last me forever unless I start spraying alot haha.

[@thetriggerman954]

@@christophermix6845 🤔 true lol

[@sideshowscot7815]

Hi trigger. I have heard good things about these guns. What fluid settings did you use for the clear? Great content as always....STILL one of the best channels our there. Spray on brother 🤜🤛😎

[@thetriggerman954]

Whaaaat up Scot thanks man. I had the fluid turned 2 turns in from wide open. Still trying to figure this thing out 😂 pretty decent gun. Ugly name but cool gun 🤷🏽‍♂️💪🏼

[@bosshawg7427]

Porphis appears to have a really good kick-off, though its hard to get a hold of them unless they reach out to you. I approached them to see what they offer and was sent to a distrubutor that relabels them. The price wasnt bad, but a bit higher than I thought it would be and all models aren't available. Shipping is the killer IIRC. They are mainly geared to supply businesses instead of single sales to consumers. Nonetheless, the guns appear to be built very well.... like pro level well.

[@thetriggerman954]

I heard the same thing, I was contacted by a few people that are looking to be distributors for the company in the US. They wanted to know my thoughts on the gun. But I see they are being sold on the link I put in the video description.

[@bosshawg7427]

​@thetriggerman954 oh damn! That's a different link than what Nadia sent me to. The guns were the same but with a different name and limited selection. The link you have is better. Prices are still up there, but no worse in comparison to the Black Widows. In fact, for the quality of build, it's better than the BW. Now I gotta go in the bathroom and punch myself in the gut a few times to resist buying more guns. 👀

[@thetriggerman954]

@@bosshawg7427 lmao 🤣🤣🤣🤣🤣 man seems like we are all spray gun addicts 😭😭😭😭

[@alduin69]

I've been painting for 2 years as of yesterday, but I've been using my brother's Satas (5500 for base, 5000 for clear I believe), and I wanna get my own guns, but I definitely can't afford those rn. Between the new Black Widow and this gun, is one better than the other for base and/or clear that you can tell? I wanna get one gun for base, one gun for clear, and both this gun and the new Black Widow are affordable for me, I just wanna make an informed decision on which to get for each application

[@thetriggerman954]

My honest opinion bro, go with the Black Widow #1 It's cheaper, #2 those black widow guns have been around for quite some time and no one ever has anything negative to say about them. These guns are new You don't know how long the seals will hold up. Even though this gun is the newest thing right now You sound like you don't have money to waste so I couldn't have a clear conscience and tell you to go out and purchase this gun over the black widow. That black widow gun sprays everything Just fine from metallics, pearls, solid base, high solids clear coat, medium solids clear coat. Hope that helps man 💪🏼

[@alduin69]

@@thetriggerman954 Thank you brother, I appreciate you

[@fernandosaldana3665]

Also they raise the price from 180 to 259🙄

[@thetriggerman954]

@@fernandosaldana3665 on which gun? The black widow?

[@fernandosaldana3665]

@@thetriggerman954 on The porphis i asked the company on watsapp and they said 180 2 weeks ago including shipping…now there is a way to buy it on their web but the price is 259 is not that bad if the gun worth it!

[@bradleyyounger8499]

From what I've heard that gun likes it best around 20psi... I'm sure it depends on the material

[@thetriggerman954]

Yes definitely depends on the material, the company told me this gun needs to spray at a higher pressure than all of their other models, so I'm still playing with it. I did lower at 2 psi on the next job and it came out great.

[@devschlong]

Would be cool if you could see if you can swap needle, cap, etc of the 717 to a 716 or 715. I just bought a 716 but wanted the 717. However, going by the specs the 717 was right at the end range of my compressor. So I was thinking I could buy a 717 needle/tip kit and sort of have the option of either. I'm probably overthinking it and the 716 will be fine for my purposes. 😂

[@thetriggerman954]

Dam man you went deep on that one. You've been putting some thought into this I see. I might try and see if it works.

[@devschlong]

I'm already regretting going with the 716 mainly because no one talks about it. All I see are 715s and 717s. Lol

[@thetriggerman954]

@@devschlong have you tried it?

[@devschlong]

Hasn't arrived yet.

[@thetriggerman954]

@@devschlong ohh 😮

[@dogstrucksnotherstuff]

Nice looking gun. Price not too bad either. Any info on paint cup adaptors it takes? PPS? Or the one you used?

[@thetriggerman954]

The one I used is Devilbiss dekup system It's adapter number 10. I'm sure every disposable cup system has an adapter for it

[@dogstrucksnotherstuff]

@@thetriggerman954 thank you much. I ordered one from the link in your description. Looking forward to trying it out!🤙😉👍

[@thetriggerman954]

@@dogstrucksnotherstuff cool let me know how you like it. 💪🏼😎

[@travlite8496]

I been watching videos on this gun i gotta have one plus i want the Walcom kombat.

[@thetriggerman954]

not a bad investment at all. Looks bad ass too 💪🏼

[@travlite8496]

what iv'e learned over the years the cheaper guns have caught up with the high dollar guns it's a magical thing.

[@thetriggerman954]

@@travlite8496 the high dollar guns Have stood the test of time lot of those guns have been around for many decades and still hold up and spray like day one. Who knows how long all of these cheaper guns will last. They do perform pretty much the same It's just a longevity is what no one knows.

[@danchernow9238]

Triggerman, What would you recommend to learn on and stick with for car restorations, between these guns for base and clear? Looking to spend under $300. Porphis 717 Master Elite 88 Black Widow Drizzle I have a 80 gallon 2 stage compressor. Thank you in Advance!

[@thetriggerman954]

@@danchernow9238 definitely Porphis 717 since you have the air capacity for it. You get much better results.

[@danchernow9238]

@ thank you!

[@danchernow9238]

@ What do you think about the Porphis phs-155 w/1.8 for primer? I currently have a harbor freight syphon feed for primer. Or any other recommendations?

[@thetriggerman954]

@@danchernow9238 I mean what you have is fine. I use a cheap $30 gun at the shop. 1.8-2.0 I'd never spend much money on a primer gun,

[@rodleypumpkins4174]

Hey man I was wondering if there was a cheap gun I can use to spray rhino liner?

[@thetriggerman954]

I've only used the gun that is made for that stuff. Usually you can buy a kit, comes with the rhino liner and the gun.

[@rodleypumpkins4174]

@@thetriggerman954 Thank you for the info. Great video!

[@thetriggerman954]

@@rodleypumpkins4174 more than welcome. And thank you Rodley 💪🏼

[@shaqhobson5074]

Where did you buy that bro? I need one

[@thetriggerman954]

The company sent it out for me to demo it. There is a link in the video description for the gun

[@MarcBchannel]

You make it look easy Trigger👌 These chinese guns are on the come up. Ive been using my NTools 4000B Sata clone and its one of my favorites. Built well, feels good in my hand, and sprays real nice and fine. For under $50 off aliexpress, cant beat it

[@thetriggerman954]

Wow 😲 is that the same gun I tried out on the channel? The one that looks like the DV1? I know that brand has a few types. But that's awesome

[@MarcBchannel]

@thetriggerman954 No its the one that looks like a Sata. Sprays real good. Nice gun for the $50 I paid off aliexpress. I think the Ntools NVE dv1 copy is $70-80 on ali

[@thetriggerman954]

@@MarcBchannel man it doesn't get any cheaper than that. We it does but for 💩 so for a good spraying gun it's a win win 💪🏼

[@BANDAREALTY]

TriggerMan, I just got my gun 2 weeks ago.. I tried it out & was not impress by it? Your gun looks like it sprays better than the one I got? My fan pattern is like 4inches Not like your Fan showing here on YT .. I adjusted the pressure Up - down , droplets were coming out big not fine... I have SATA guns , Tekna By Devellvis , also The Kiwami 4 by Iwata Now that one sprays Nice compare to Porphis, well the one i got that just came in.... I was really looking forward to having another Bad Ass Gun! Bro do you think I may have a defective one? Or am I doing something wrong? Please advice Thank you in advance.. Los.

[@thetriggerman954]

If your fan pattern is only 4 inches then something is definitely wrong. I'd contact them. Might be a defective gun. That sucks. The gun sprays really good when working properly

[@TheHumblePaintSprayer333]

Great video man, that looked nice and flat, I’ve never heard of them before are they a new company or is it just the American market they sell in

[@thetriggerman954]

It's a new company, I believe they are in China. They do not have distribution here in the states from what I'm told. You have to go to their website to purchase them. There is a link in the video description of you want to check them out. Sprays awesome. Thank you for watching 💪🏼

[@TheHumblePaintSprayer333]

Thanks ill have look, have a blessed week man 🙏@@thetriggerman954

[@RickysmobilebodyworkinLaPuent]

hey trigger man I was thinking of getting one of those guns what adapter do you have on there for the D cup what number is that

[@thetriggerman954]

It's a #10 for Dekup

[@kennycharneca1]

Mr triggerMAN have you compared the LPH-400 vs the W-400 ?? are they the same ?

[@thetriggerman954]

There is no comparison in my opinion. I have both and I hardly ever use the w-400 they are not the same

[@joshuashattuck9267]

Where did you buy it from?

[@thetriggerman954]

From the company. Link is in the video description

[@imrefratilla922]

Would you do 1.4 or 1.3

[@thetriggerman954]

@@imrefratilla922 after spraying with them for a while I think the 1.3 is perfect.

[@imrefratilla922]

@thetriggerman954 OK thank you

[@retrill88]

The Big Cousin edition 🔥🔥💯

[@thetriggerman954]

Skuuuuudman ❤️ whaaaaaaat up fam

[@SashaDichkovski]

Can you spray metallics with this gun thanks

[@thetriggerman954]

Yes I actually have a video dropping next week with it spraying Metallics

[@SashaDichkovski]

@@thetriggerman954 what do you think should i purchase this gun or sagola 3300 thanks

[@thetriggerman954]

@@SashaDichkovski That's a tough call my man, Sagola as we know a great guns and will last you a lifetime, this gun sprays great has less overspray so it'll just be down to if you want to gamble with the longevity of this gun. I mean I'm sure it'll be fine but those are the two determining factors that I look at.

[@chuckstewart9375]

Trigger my 3Some on Guns. Iwata..Sagola.. ANI f 160 .good Combo

[@thetriggerman954]

Ohhh you dirty boy 🤣🤣🤣😱 that sounds like a hot session

[@sixeight6]

Trigamann I purchased one do u know what adapter are you using for the cups

[@thetriggerman954]

It's a #10 for my system. Yours could be different. I think it's the same as the black widow

[@joewolf4483]

Looks like it sprayed out nice ... good lookin gun ... I don't know about a 3 way with it but mightconsider it ... cool havin your name on it ... means you are " impotant " ...

[@thetriggerman954]

Thank you Joe it can lay some paint that's for sure 😁

[@The_North0]

What’s the reason why the base coat has sandpaper texture feels after spraying the base coat? Is it because the base dry too fast?

[@thetriggerman954]

To dry, could be under reduced, wrong temp reducer, pressure to high, bad technique. And the list goes on.

[@darinlewis9478]

What PPS adapter are you using on that gun ??

[@thetriggerman954]

I'm using the Devilbiss Dekups disposable cup system

[@darinlewis9478]

@@thetriggerman954 Thank you But what adapter fits on that gun ?

[@mayan34956]

Man looks nice a have a lph 400 with the orange cap. Its been sitting in my drawer for months. I have not had the opportunity to spray with it yet. I using my cheaper 🔫

[@thetriggerman954]

Mayan if you don't get that lph400 out of the drawer. Are you crazy man 😤

[@mayan34956]

@thetriggerman954 every time you talk about your lph 400 I want to go pick mine up and spray something. I have some things line. I will use it than. Man you make look like nothing no effort.

[@mike964-p5e]

Hey Tribgerman what is the best way to remove 3M cutting compound from trim

[@thetriggerman954]

Soap, water, a brush and some muscle

[@mike964-p5e]

thankyou sir

[@thetriggerman954]

@@mike964-p5e anytime 💪🏼

[@cabrezzy7838]

Hey trigger any advice on making mistakes? I fked up a job today and the anxiety is killing me

[@thetriggerman954]

How do you expect to get better if you don't fk up? THIS IS WHAT MAKES YOU BETTER!! sounds like mumbo jumbo but it's the truth man. I still fk up jobs till this day. We're all human bro. We didn't even know the word "anxiety" back then we just have a few drinks after work, curse a whole lot and learn from the mistake and TRY not to let it happen again.

[@nickcrill7718]

Was almost the first like but then I had to put cloths on my son 😂 that’s a gun I want to try! The clicks sound nice

[@thetriggerman954]

Yes Nick That would be a little bit more important than being first 🤣🤣 We can't have little man catching a cold. With all the snow you showed me up there that wouldn't be good lol gun is pretty bad ass

[@nickcrill7718]

@@thetriggerman954 yeah haha he keeps taking them off.. he turns 3 this month. snowed another 5 or so inches then it all melted away. Bipolar weather. I’m sure summer will be 115 or so 😂 can’t wait I see more videos with that gun.

[@ryanw7950]

Triggerman! Can we get 2 guns 1 cup porphis 717 vs iwata LPH?!

[@thetriggerman954]

@@ryanw7950 🤔 now that would be a good one. Ok adding it to the list. That's a real good one. Might skip the line with that one 😅🫡

[@ryanw7950]

@@thetriggerman954 Hell yea brother!

[@jcgarcia.garcia2241]

Hi trigerman, can you please share me the link un orden I can Buy one spray gun porphis PRD 717? Thanks in Advance!!!

[@thetriggerman954]

It should be in the video description

[@robm-r1t]

whats the brand base you use

[@thetriggerman954]

ProSpray

[@manuelmejia76]

What did u do to it ti take out swivel out of gun idk if u member I asked u what u recommend on base n clear u said 18psi and 23psi is that still good cuz u wiere jus saying u were spraying at clear @ 30psi

[@thetriggerman954]

23psi will work but a little higher seems to get better results with my materials. Still trying to dial the gun in. I ordered some fittings from Amazon lemme see if I can find it real quick

[@thetriggerman954]

amzn.to/4arJeRN

[@manuelmejia76]

He'll yea fam thank u

[@manuelmejia76]

Jus ordered them bro thanks again fam

[@thetriggerman954]

@@manuelmejia76 you got it man. Use Teflon tape, It's a different type of metal so to prevent corrosion use a good amount of Teflon tape and you'll be good. 💪🏻

[@colorbosscustomautobody8140]

I have at least 15 guns and I'm ready to buy this thing because TriggerMan dun sold me on it! 😅

[@thetriggerman954]

Man I got like 40 guns and still buying them. We need "Spray gun rehab" Hi I'm triggerman and I'm an addict 😭

[@colorbosscustomautobody8140]

@@thetriggerman954 holy $h!t Trigga Man! Well I feel a lot better now! I'm just as bad when it comes to DA's and tools. I got a different DA for every possible application. 6", 5", 3", 2", you name it! Electric, air, on and on and on! But the crazy thing is, each one has a SPECIFIC PURPOSE! So my addiction helps me work better 😂

[@mainedapainter]

1.3 or 1.4?

[@thetriggerman954]

1.3

[@ericbrown-ti5kb]

Triggerman if I keep following behind you I will have brought every spray gun on the market..😅😅😅..good job though man..keep them coming..can't wait for the episode..God bless.

[@thetriggerman954]

Man you got enough guns to go to war you don't need anymore. 😉😜 That's like saying your car doesn't need more horsepower 😲💪🏼

[@elespecialista-eg4rn]

Paint code that color watching from puertorico.

[@thetriggerman954]

Man I'll have to get it Monday when I get to work I forgot 😕

[@elespecialista-eg4rn]

Ok tanks

[@deanbrown7643]

Work hard play hard trigg 😊😊😊😊😊😊

[@thetriggerman954]

4sho Mr Brown. 👊🏼

[@mikhailSRT4]

Damn 15.2 cfm

[@thetriggerman954]

Yep something for the big boys 💪🏼

[@ANDY-we7mr]

TRIGGERMAN IS THAT THE 1.3 OR A 1.4 YOU GOT

[@thetriggerman954]

1.3 Andy 😎

[@ANDY-we7mr]

@@thetriggerman954 just says mate on your video 1.4 buddy would you say it's good at the sagola extreme aqua 4600

[@thetriggerman954]

@@ANDY-we7mr not quite 😜

[@ANDY-we7mr]

@@thetriggerman954 so the sogala extreme aqua 4600 a better gun mate

[@thetriggerman954]

Man you know that. Quit playing games 🤣

[@richardblanke5521]

🎯💰a 3way🤣🤣🤣

[@thetriggerman954]

💃🏼🕺🏼💃🏼🪩

[@trolllibtards2604]

👍🏻

[@thetriggerman954]

💪🏼

[@davidharrison8397]

Looks like it might be a good investment for me...that turned out slick. Cool they out your name on it.😎

[@thetriggerman954]

Yea that was pretty cool 😎 I don't think you can lose if you got one , next job came out like glass even my boss was like 👀 video is all done I'll release it next week, 💪🏼

[@guillaumel3640]

Nice job bud. Can we order the trigger man addition? It would be awesome 😎

[@thetriggerman954]

Damn man I wish, now that would be awesome I think I'd shed a tear on camera if that ever happened 😭🤣🤣 💪🏼

[@davidduran5745]

Are they gonna make a trigger man Miami Mommy edition? 💃

[@thetriggerman954]

😲😂😂 wouldn't that be something. 🕺🏼💃🏼🕺🏼💃🏼💃🏼 El Triggarita 🤓

[@beachcitymobile]

Whata, whata, whata we got goin on with the shirt? We matching the shirt to the car in the booth now? Are we goin haaii tek now? Got the green screen? That's right, "Any car, any (shirt) color" Just like your boy Earl... 😁😉😆😂 BTW, where were you sticking that finger, Trigger? Somewhere you shouldn't have? Hmmm? That's the money maker. Better protect that finger!! 😉😛😛😁😂

[@thetriggerman954]

LMFAO 😂😂😂 man you always come with the jokes. That's the same blue shirt I been wearing since day one lol anytime I start doing a lot of painting my one Trigger finger gets all cracked up so I wrap it up with A&D ointment and it clears up in a week. It's been like that for since I started painting. The ladies don't like the feel of that crispy finger 👆🏼 😱

[@dalesmith561]

I've heard you mention that someone stole your 7 a while ago. I have one that I will send you, if you want it.

[@thetriggerman954]

Hit me on IG I might buy it 🥳🥳🥳

[@dropbear9526]

I want to try one of these. Apparently, they work better at a lower pressure. 20 to 25 psi

[@thetriggerman954]

The next job I shot at 27-28 and it was perfect. The 30 was too high. The company told me that they need to be sprayed at higher than the other models. Just like any new gun it needs to be tweaked and dialed in. 💪🏼🥳

[@Peter_M89]

Website says 15.2cfm. deff big boy compressor territory.

[@thetriggerman954]

Yep that's correct 💯

[@ANDY-we7mr]

​@@thetriggerman954 you need a big compressor 😊