I am saving your videos so that as soon as I buy my Carrera I will check them again. Your videos on oil change and spark plug change was very helpful
@TommyLGarage2 ай бұрын
Happy to hear !!!
@Youppp2 ай бұрын
Great tutorial Tommy. You're right you can't unsee it. I think they would look better if they were paint matched the same yellow as the car. That would make your Carrera T unique. Food for thought.
@TommyLGarage2 ай бұрын
Thank you for the feedback. Since my front and rear pieces are not color matched, I left them like this. But I agree if everything was color matched, it would be great.
@PSA9552 ай бұрын
Another great mod, thank you Tommy for draining my checkbook!
@TommyLGarage2 ай бұрын
My pleasure !! :)
@martinpeter46752 ай бұрын
Perfect, thank you. I ordered the same and followed your instructions, step by step. All very helpful. Only with the Porsche clips I am not 100% satisfied. I am not sure they gonna hold…😅 The result looks great to me!!!❤
@TommyLGarage2 ай бұрын
Happy to hear!! So my side skirts held up very well at a track day.
@Youppp2 ай бұрын
I ve just had another look at this. And actually the plastic used in these side skirts is a perfect match for the colours used on the OEM decal Carrera t that runs along the doors amd the front splitter. It actually looks really good.
@TommyLGarage2 ай бұрын
It’s slightly darker than Carrera T but could pass the smell test
@leinadzerep702 ай бұрын
Excellent! Looks great. Great video!
@TommyLGarage2 ай бұрын
Thank you very much!
@davidtinker34702 ай бұрын
Love your videos. Thanks!
@TommyLGarage2 ай бұрын
Glad you like them! Thanks for the love !!!
@jt3sd2 ай бұрын
Tommy you did it again , thanks for T’ng up my next mod ! Been pondering these too for my T. Agree 100% carbon fiber non starter on our Ts, didn’t know Rennline had these in ABS -plastic , must be recent ???
@TommyLGarage2 ай бұрын
They’ve had them for about a year. But it took TLG to get them out there! :)
@Californification2 ай бұрын
Great DIY. I went with the OEM GTS/Targa one which IMO looks a lot better. The rennline looks like an afterthought tack on. Check out the thread on rennlist for the GTS sideskirt. Looks great .
@TommyLGarage2 ай бұрын
Curious - what’s so afterthought about it? To me it looks great
@Californification2 ай бұрын
Can’t respond as my reply keeps getting rejected when I post a Rennlist link. Not sure why.
@Californification2 ай бұрын
@@TommyLGarage The link doesn’t work so I’ll try and explain what I mean. Again this is personal opinion and I had the same gripe with some aftermarket side skirt options on my F80 M3 similar to your blue one. Go to the 11m30s mark on the video where you are cleaning the side skirt. The issue I have is that extended lip both on the front and the rear. If you look at the OEM side skirts (GT3, GTS, Targa, etc) they all curve back in towards the front and the rear to be flush with the rocker panel. That’s my issue with this one. Again, just my opinion. Great job on the DIY.
@AnthonyGambiniАй бұрын
Hey Man, tks for the video, super helpful. Do you know if Porsche has side skirts for narrow body? Do we have to go with this supplier?
@TommyLGarageАй бұрын
So unfortunately, no, they do not have side skirts for narrow bodies. This is our only solution.
@jefflee61542 ай бұрын
Looks killer!
@TommyLGarage2 ай бұрын
I agree!
@aaronbell57432 ай бұрын
On your older video where to soul cats worth the installion and cost? Was there much diff in sound??
@TommyLGarage2 ай бұрын
Definitely worth it. Best sound mod !
@aaronbell57432 ай бұрын
@@TommyLGarage Hard to hear a cat change will make that much change. It must flow that much better.
@edjustice77552 ай бұрын
Have been looking for side skirts forever, while these look great the fitment from the manufacturer could have been better for what you pay. It makes one wonder what car they used for making these. In anycase thanks for your usual tips and pro tips!! Appreciate all you have shared and the work you put into your content!
@TommyLGarage2 ай бұрын
What’s wrong with the fitment ? It’s perfect.
@edjustice77552 ай бұрын
@@TommyLGarage Bending the tabs down underneath, they could have provided replacement clips. Rear flap, they could have done better fitment imho, again for that price. Or molded that end piece into the skirt. Compared to other solutions, I have to give to them though until someone does a better job, or V1.1.
@carreralicious2 ай бұрын
Having to superglue the rear flap to the body is a bit risky no? What happens if you have to remove the flap one day? Will the superglue pull the paint?
@rwdconnor2 ай бұрын
Ive been between these or the Maxton design ones. I just dont know how i feel about the front section coming out like the rear. Regardless, great video!
@TommyLGarage2 ай бұрын
It actually flows with the body lines. They look great in person.
@rwdconnor2 ай бұрын
@@TommyLGarage well, im sold lol
@leekindell99372 ай бұрын
cant you add gt3 side skirts or is yours too narrow on body type. on my 991.2 i added oem porsche gt3 skirts painted in body colour, looked great as i hate maxton stuff or other third party ones
@TommyLGarage2 ай бұрын
GT3 figment is not that great
@leekindell99372 ай бұрын
@@TommyLGarage oh did it not work on yours. mine went on perfect really easy straight swap no fitment issues as its porsche. i had it ppf as well so helps keep stone chips off the arches
@porschestories4092 ай бұрын
I have wanted these for my gt silver T
@TommyLGarage2 ай бұрын
Getting them ?
@ferdl79402 ай бұрын
Really nice!
@TommyLGarage2 ай бұрын
Thank you! Cheers!
@throttletribevn2 ай бұрын
When will u get spacers?
@TommyLGarage2 ай бұрын
I do have spacers. This is my track setup
@lordmaximus2 ай бұрын
Thank you!!!
@TommyLGarage2 ай бұрын
You're welcome!
@AutoAmateur2 ай бұрын
Ohhhh FFS... *reaches for his wallet....** NOW I WANT SOME!!
@TommyLGarage2 ай бұрын
Seems to be the trend :)
@seandenny15532 ай бұрын
Do they have a kit that fits a 99.1?
@TommyLGarage2 ай бұрын
Yes they’re the same
@kentao42 ай бұрын
Cracking up! “De nature d”
@TommyLGarage2 ай бұрын
Aahhhhh!! Haha I’m a foreigner
@kentao42 ай бұрын
😂
@andresmattos75412 ай бұрын
Thanks God you covered that huge head of yours is an eye sore.
@TommyLGarage2 ай бұрын
I think someone has a crush on me. I’m married but very flattered. You sound like such an awsome person.
@jamesguirand82432 ай бұрын
Fan in Ottawa
@TommyLGarage2 ай бұрын
Hello fan!
@amdrew56672 ай бұрын
Mi tak szczerze to wogole sie nie podoba . Ogolnie to kariere robi Polska firma produkujaca takie dokladki . Nazywa sie Maxston Design
@TommyLGarage2 ай бұрын
Maxton nie jest taka sama instalacja. Tutaj jak orginal
@bogdank27902 ай бұрын
@@TommyLGarageMi się bardzo podoba! Bardzo lubię twoje videos! 4 tygodnie temu kupiłem 991.2 4GTS..i twoje videos będą mnie dużo kosztowały! Dzięki za twoje pomysły! Gdybyś kiedyś miał pomysł który potrzebuje CNC maszynowanie, daj znać .. mam 5-Axis maszyny
@TommyLGarage2 ай бұрын
@@bogdank2790 gratulacje!! Jesteś w stanach ??
@bogdank27902 ай бұрын
W Kanadzie (Toronto) ..ale wysyłam części do stanów cały czas..maszynuje front covers i oil pumps ale mogę produkować wszystko co można wymyślić