Porsche 992 Turbo 2021+ | Cat-Back Valvetronic Exhaust Installation | How To Do It Yourself

  Рет қаралды 14,748

Fabspeed Motorsport

Fabspeed Motorsport

Күн бұрын

Пікірлер: 19
@F87_Frank
@F87_Frank 3 жыл бұрын
Don’t even have to take off the bumper lol, easiest supercar to work on👏👏👏
@sweeney5296
@sweeney5296 Жыл бұрын
Getting ready to buy this exhaust and 200 cell cats from you guys. When you reinstall the electronic stock actuators to the new exhaust valves, do you take out the stock valve springs and put them into the new exhaust valves before connecting the stock actuators? Thanks!
@homerholt3
@homerholt3 2 жыл бұрын
great info here....thanks a ton for posting! just wondering, can't the cats be left alone? worried about removing the O2 sensors and it just looks like you don't need to touch them. thanks again
@FabspeedMotorsport
@FabspeedMotorsport 2 жыл бұрын
Thank you! It MIGHT be possible but honestly on such a new car the o2 sensors aren't an issue like they would be on an old car and loosening up the cats makes the install 10x easier.
@ricks_toys
@ricks_toys 2 жыл бұрын
What's next again?
@KingofKingz428
@KingofKingz428 Жыл бұрын
I’m working on a new targa 992 and the drive mode is normal but the valvetronic system does not want to work,any idea why? I checked for codes and no codes were shown but still valves don’t open
@FabspeedMotorsport
@FabspeedMotorsport Жыл бұрын
Hi, please give service at Fabspeed a call. 21- 646-4945
@PaulPianoKid
@PaulPianoKid 2 жыл бұрын
Thank you so much for the post! Very informative. I have a question: Do you know if I have to remove the bumper for 992 Carrera S, or is it the same thing as 992 Turbo and Turbo S? I really want to avoid removing the bumper. Thanks
@FabspeedMotorsport
@FabspeedMotorsport 2 жыл бұрын
Thank you! The install will be very similar for a 992 Carrera, so you do not need to remove the bumper.
@PaulPianoKid
@PaulPianoKid 2 жыл бұрын
@@FabspeedMotorsport Thank you so much, I really appreciate it!
@AW305
@AW305 3 жыл бұрын
How did you get the 6mm v band in its oem position. The top of the bolt is facing up! PIA TO REACH
@FabspeedMotorsport
@FabspeedMotorsport 3 жыл бұрын
A flex socket adapter and a wobble extension I believe. Dang German engineers never thinking about the mechanic haha.
@gccjason
@gccjason Жыл бұрын
I used vice grips on the bottom of the vband bolt and they broke free easily.
@dimitarbalev1550
@dimitarbalev1550 3 жыл бұрын
Do i need to remap for the 200cel downpipes or i wont get check engine light?
@FabspeedMotorsport
@FabspeedMotorsport 3 жыл бұрын
No ECU tuning is necessary! We guarantee no CEL
@dubful1
@dubful1 Жыл бұрын
@@FabspeedMotorsportis that no CEL condition for the Akro cats? I know it’s not an issue for OEM cats.
@FabspeedMotorsport
@FabspeedMotorsport Жыл бұрын
@@dubful1 Akro as in Akrapovic? We don't make claims about any other manufacturers' products, only our own.
992 Carrera / Turbo - Install Guide (How-To) Aftermarket Muffler
13:32
Flat 6 Motorsports
Рет қаралды 10 М.
Porsche 911 Turbo generations DRAG RACE
14:20
carwow
Рет қаралды 4,2 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
How to install TURBOS on a PORSCHE 992 911  (2018+)
36:29
Kies Motorsports
Рет қаралды 8 М.
Wagner Tuning -  Porsche 992 turbo(s) Intercooler Installation
13:12
Wagner Tuning Gmbh & Co. KG
Рет қаралды 6 М.
Techart GT Street R Porsche 992 Turbo S - FAST Launch Control, Revs & Engine Sounds!
5:28
HOW TO MAKE YOUR PORSCHE 992 TURBO S SOUND BETTER [AKRAPOVIČ EXHAUST]
7:25
992 Turbo S Titanium Exhaust Install!
18:03
Adam LZ
Рет қаралды 755 М.
1,000 HP Porsche Turbo S in the garage....
11:44
DragTimes
Рет қаралды 313 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН