Porsche Cayenne tail light bulb replacement

[@CodytheCarGuy]

www.codythecarguy.com www.codythecarguy.com/store www.codythecarguy.com/forum

[@yookabu]

I have an 06 cayenne and your video was exactly what I went through to successfully change my own bulb! Thank you for posting this! The only thing was I had to forcefully and carefully yank my light out after unscrewing the 2 bolts. Carefully, not to rip out the plug and wiring. The ball joint was stronger than anticipated.

[@Uneedacar]

Thank you sir I love utube didn't have to pay a 100$ because I drive a foreign car I listened thanks again it was simple enough

[@maxe.1204]

So all 5 bulbs are the exact same?

[@strictlydubai]

Would 1157 led be acceptable for brake light without the 50w resistor ?

[@winnie7563]

My 05 needed a T30 to remove the 2 bolts. Thank you for the video

[@sandyabeysiri4936]

Thanks Cody! This was brilliant - I just changed my light and followed your instructions - very clear. Also got a question - I happened to discover during my brake light change that one of the torque nuts and plate holding light in is missing (held together by different screw). Do you know where we could source replacements? (Nut and plate look easy enough to fit). (I have a 2004 Cayenne)

[@Saywhatohno]

Is there a way to check whether the bulbs are gone or if it’s a mechanical/wiring issue with the back tail lights. We are buying 2004 but the tail light and back brake lights don’t work so we are wondering if it’s just a bulb or other issue. Can we check with om meter?

[@KamranKhan-fh8uv]

Mine seems stuck, took bolts off and even with some pressure, light compartment wouldn’t come out, argh

[@giudaenterprises22]

does this apply to the 2011-2013 model too?

[@jabast09]

Great video Cody! straight to the point!

[@HimHunchoGang]

Can you do want on changing headlight

[@kapullas]

You left the difficult part out of the video 😅

[@netters1944]

I broke the plastic fitting the button fit in to. Gotta find one of those.

[@rmazreku7031]

Isn't not always come straight out thats not trouth

[@98CROWNVIC]

Still waiting on that rx8 ls swap :(

[@CodytheCarGuy]

The rx8 is almost ready to roll in the shop for the swap, had to catch up a couple customers cars and setting up some new fab equipment in the shop.

[@HighDefinitionVideo]

Thanks buddy.

[@LifeInElSalvador]

Now I know how to do it when I get one in 10 years from now :)

[@Ronathon02]

El Salvador trust me, you DONT want this. Parts are HARD and EXPENSIVE to find for this vehicles. Plus it has many problems. Just buy a Ford Explorer instead or something American made.

[@tiffanywells1909]

Thanks so much for the video ! I will be changing mines tomorrow.

[@med8tor1]

thanks, that was very informative.

[@robmarshall8633]

thanks Cody