Powder Coating On My YZ250 Build With Crazy Results! Part 4

In this video, I Powder Coat the parts on my YZ250 two-stroke project. The parts came out absolutely amazing and should hold up for years to come on this dirt bike build. If this video strikes your interest in powder coating stay tuned to the end of the video for a link to my in-depth powder coating video.
Help support the channel and shop my favorite tools at The D Zone- thed.zone/prod...
My Favorite Engine Tools- thed.zone/prod...
Products Used:
Prismatic Powders- www.prismaticp...
Colors used in this video- super chrome & anodized blue
Oven- amzn.to/2O93VeC
Eastwood Painting Prep- www.eastwood.c...
Powder Coating Gun- www.eastwood.c...
Instagram: @adampaganelli
Business email: [e-mail]
Music:
Song: Nekzlo - Palm Shadows (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Nekzlo - Palm Shadows ...
Song: Skylike - Imaginary (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Skylike - Imaginary (V...
Song: SKANDR - Summer Booty (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • SKANDR - Summer Booty ...
Song: High Rule - Control (Instrumental) (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • High Rule - Control (I...
Song: MBB - Fresh (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • MBB - Fresh (Vlog No C...
Rural Disturbance - Stacked
/ stacked
/ ruraldisturbance
/ @brosinsmusic
Rural Disturbance - Road Trip
/ road-trip-87bpm
/ ruraldisturbance
/ @brosinsmusic

[@adampaganelli4891]

Thanks for watching! If you are looking for a way to support the channel consider shopping for your Powersports parts at The D Zone. I also put together a list of my most commonly used tools for you guys to reference- thed.zone/product-tag/tool-collection/?count=36&orderby=popularity&ref=AP34

[@tylersvensson4468]

Adam Paganelli i think you should do it like the Jeske yz125 as that bike looks insane

[@charliehannan9465]

Adam Paganelli black

[@therightreverendrawhide7587]

Another shade of blue ?

[@raptormx9502]

Dark grey or black

[@charlesxavier9640]

Weinkle black

[@yamahaxs6501]

just catching up with some of your older vids. Your builds are top notch!

[@petrovicszsombor9945]

When you done with the rebuild, then do a timlapse of it!

[@adampaganelli4891]

Okay sounds good!

[@erichildreth7562]

Man you did an amazing job on the powder coating and that blue looks amazing!! Can't wait to see the frame!!

[@adampaganelli4891]

Thanks Eric!

[@VasilyBuilds]

The colors look fantastic!

[@BTR2018]

Vasily Custom Builds: How u feeling buddy, glad to see u on here.

[@VasilyBuilds]

@@BTR2018 I'm great. I'm working on some videos for this month

[@BTR2018]

Glad to hear your better:)

[@adampaganelli4891]

Thanks dawg

[@FULLTHROTTLEFILMZ]

Heck yeh bro that is a slick blue! Can’t wait to see the frame reveal!! Another great video 👍🏼

[@adampaganelli4891]

Thanks dawg!

[@sebastianlootus6950]

love it, you competing with Cameron Niemela

[@mountainvalleyfrost5777]

I don't think he's competing as much as learning and then giving his own twist on a build. And they are both Pacific Northwest boys, just doing things that they enjoy. I've even contemplated doing a build or two.

[@sebastianlootus6950]

Mountain Valley Frost agreed

[@BrokenSprocket]

Building bikes is not a new thing lots of people do this stuff.

[@marvins453]

He’s definitely inspired by niemela which is awesome to see Cameron have that effect. This kids good!

[@richardupyurass2379]

Loads of work but holy crap that is killer looking. You are going to have a show bike that won't ever see the dirt

[@laloutre3180]

just amazing !!!! very very good job mate 👍👍👍👍👍

[@adampaganelli4891]

Thank you!

[@laloutre3180]

@@adampaganelli4891 a great pleasure to follow your great job in France 🦾

[@monzarace]

Extremely nice, almost looking like some sort of thick blue crome. Well done! Kind regards

[@BTR2018]

Dude, it looks amazing!! thanks for the inspiration:))

[@gs16gt90]

Nice job love the blue , I’ll be putting that color on my mustang wheels , thx for all the links and useful tips , catch ya on the next one

[@backyardprojects8153]

This is a epic color

[@UlisesGlez26]

First! They look amazing man!

[@adampaganelli4891]

Thanks man!

[@VlogEpicness]

Well done. That looks soooo good 😍

[@adampaganelli4891]

Thanks man!

[@kieranmann9761]

Looks amazing!! Perfect color for that YZ!!

[@adampaganelli4891]

Thanks Kieran!

[@TastierBackInThe80s]

Looks mint. Good choice of colour.

[@adampaganelli4891]

Thanks Jacen!

[@dny9394]

Hi Adam. With all those delicate threads to protect why didn't you Soda-blast? It's quite gentle but adequate for the pretty clean job you're doing, and rinses out leaving no residue, a double benefit for delicate threads etc. Would save you a lot of tedious work blocking off then unblocking. Just my 2c. Great series by the way, doing a good job. Like the music too..

[@maneljoaquim4047]

damnnnn the parts are insanee!!!!!!! very cool video

[@adampaganelli4891]

Thank you!

[@jimmadonna1436]

Nice work! Love the color and results. Looks great!

[@adampaganelli4891]

Thanks Jim!

[@jimmadonna1436]

@@adampaganelli4891 thanks for making great videos that showcase your talents.

[@jasonsutterfield6968]

what blast cabinet are you using? I need to upgrade!

[@rafaelmercado5771]

Can you spray primer with the Eastwood powder coating gun ?

[@Aberta94]

Why did you use crome first and colour later?

[@soxh8ter]

what media do you use for your blasting? turned out amazing

[@illhaveanother4365]

Will the bearing puller destroy the bearings?

[@jvazquez7705]

What do you use for the time blessing black diamond

[@edwardmcewen]

That powdercoat looks amazing!

[@adampaganelli4891]

Thanks man!

[@grupoladiferencia7032]

Good job 🤩, How can I get that color? I want to paint the frame of my quad

[@michaeljtalkington7960]

Why did you chrome before the blue powder coating?

[@JohnnyArtoff]

buddy of mine powder coated a frame it wore right off make sure to buy frame guards!!

[@elcucuygarage]

Adam, where you out of man? I grew up in Thurston area and keep seeing people mention you're from the "Pacific NW"

[@adampaganelli4891]

Kent area!

[@elcucuygarage]

@@adampaganelli4891 sick man, I was in Renton for awhile growing up so real close.

[@slickricktheruler]

If it were up to me I would of NOT powder coated the frame. But I am very interested in seeing how it comes out. 👍🏼

[@adampaganelli4891]

Thanks Richard. I was going back forth. Eventually I decided to do it just to experience something I haven’t done before.

[@jonthelamb4549]

Adam Paganelli I’m sure it will look sick if I did it I would get frame guards before riding so it won’t rub of

[@davidhollyfield9712]

What sandblaster do you have and what tip are you using on the gun and which sand do you use that seems to work very good

[@ramawardana666]

Yea i am really waiting your video dude

[@adampaganelli4891]

Thank you!

[@roadassassin9445]

Awesome how much would something like that cost

[@andrewbodey5025]

Just curious, what size HP air compressor do you run for the sand blaster?

[@travisk5589]

How did you keep the powder out of the inside of the hubs? And doesn't the hooks used for hanging the parts leave a mark in the powder

[@tomatoknuckles]

Great job man love the colour. Excited to see what colour you went with for the frame👍

[@adampaganelli4891]

Thanks man, I appreciate the support!

[@ottotiikkainen9056]

how big is that sand blaster and what modes is it?

[@zeljkomarkanovic23]

Thanks for link i order cheater blue.In Croatia doesnt exist :D

[@Fulcra]

How did you learn to powder coat

[@ludovicpernot9691]

Good evening, Do you have any link for the purchase of the sandblasting booth gun nozzles? The one you use looks better than the original ones thank you in advance

[@bjputvain]

what is your media blaster and what cfm is your air compressor?

[@mantaship]

Gorgeous blue!

[@romyaguila]

how much per hub sir for the powder coating

[@scrubsdeskscrubby393]

Lighten up on the air pressure to the gun, wasting a ton of powder.

[@danssv8]

Wow nice , love it

[@G513-y3o]

Beautiful blue!… Maybe just a hair lighter but awesome job love it

[@farim7881]

What did you use to plug those holes ?

[@horexwerkstatt7010]

Cool. .. good Job! Regards Alex from Germany

[@robertturton8399]

Great video Adam. Powder Visions will do an awesome job on the frame. They just finished a set of wheels for me and I highly recommend them!

[@westcoastmotox5850]

Hi there bro you have done it again nice vid mate love the Finnish you got on them parts I have yz 450 coming up on one of my vids in the next few wks you have gave me so good ideas on how to really bling it up keep it going mate and god bless

[@adampaganelli4891]

Thanks man! I appreciate it.

[@javierredondo756]

Beautiful me encanta el resultado 👍

[@coatingsplatingsjas1powder557]

Good job man your made for this

[@stantheman5005]

Great job but what happen with spring after high temperature

[@kylelosacco3355]

Those look so sick!

[@adampaganelli4891]

Thanks man!

[@markgomez7640]

what toaster oven do you have

[@fromthearea3147]

How long does powder coating hubs and stuff hold up to chips and natural wear?

[@vsego.horoshego.]

Hello from Russia! What kind of installation for degreasing how to find it ??? 8:15

[@garzamotostaller716]

Hello, how are you? Greetings from Mexico? I would like to know what machine you use to paint and what kind of oven do you use? I hope you can help me greetings

[@robheathcote8561]

fantastic man, well done

[@adampaganelli4891]

Thanks Rob!

[@BrokenSprocket]

Another great video keep up the good work..

[@adampaganelli4891]

Thanks man!

[@gabrieldean9559]

Great video! What size compressor and how much psi for the blasting? Thanks in advance!

[@chaunceydixon9329]

How much u charge for a set of Harley wheels 23 front 18 rear in blue chrome???

[@leec48s45]

Adam, what sand blasting cabinet did you use?

[@adampaganelli4891]

It’s a used one I’m not sure on brand. My advice is look for a nice used one in the 300-600 range and make sure it has a built in vac.

[@AdrianGL301]

Love this channel. So much $$$$ €€€€ saved when u learn basic mechanic stuff,

[@adampaganelli4891]

Thanks man!

[@jonryan391]

Whenever I make something with my everlast welder I always struggle with how to finish it. Powder coat would be fantastic.

[@MennoniteRanger]

Holy smokes dude fantastic job on the hubs and springs! Have you ever tried any of the other anodized powders from prismatic? I’m looking to powder my hubs an anodized copper.

[@borna9842]

Glad to see you doing another build Adam... Wanted to know, after the wheel hubs come done from the owen what do you do to clean the inside of the hub (the shaft hole lol) from all the powder that comes in while coating?

[@adampaganelli4891]

Thank you! I masked off the inside of the bearing race. Other then that it’s not a clearance fit for the collar piece so there’s no need to clean any overspray as it will not be visible or effect performance.

[@wenethmoon6587]

ouch I was getting hyped watching the pre-heat thinking there was going to be some hot spraying, shit looks so satisfying, but really I hope you know once you've blasted you shouldn't be touching it again with any cleaning product like please don't do that I almost cried at that point 😂

[@kevinlatinski826]

Trent Reid that’s funny I’ve been powdercoating for almost 20 years . Like big heavy batch coatings and a ton of custom coatings . To this day I still only hot coat unless I’m too coating with clear . It’s soooooo satisfying hahaha

[@therightreverendrawhide7587]

Awesome finish ...is it possible to flip-flop colours with this stuff (2-tone)..?

[@adampaganelli4891]

I am not sure. Check out there website through the link in my bio.

[@motoblast3574]

awesome results

[@adampaganelli4891]

Thanks man!

[@throttlefamily4655]

Great video gave us a ton of ideas for our builds!!! Keep up the great work!

[@highsnburgers4862]

Great color!

[@SkinnyAndFast]

What solution do you use in the parts washer??

[@adampaganelli4891]

Costco oil eater mix or simple green

[@NTRGFX]

Hey Adam, where did you get that spanner wrench for the shock nut? I looked on RMATV but couldn’t find one.

[@adampaganelli4891]

It’s actually a steering stem one but it works on the shocks as well. Not a perfect fit but it’s better then hammering on them for 30 minutes haha. I got it from RMATVMC it’s one of there tusk tools.

[@exhaustfumes927]

Hey man what kind of blasting material are u using in the cabinet

[@adampaganelli4891]

Alluminum oxide 100 grit

[@exhaustfumes927]

Adam Paganelli thanks man

[@TheBushcraftBrothers]

Came out awesome man. How much was the frame to get powder coated? I would think it's not too bad since you did the prep.

[@adampaganelli4891]

Thanks Cole, They’re not going to charge me but I will ask in the next video how much it would cost so you guys know what they charge.

[@yatesfamily5497]

What is the media you use in your sandblasted?

[@adampaganelli4891]

Alluminum oxide

[@Jebb209]

What blasting material do you use?

[@adampaganelli4891]

100 grit alluminum oxide

[@CraftwerksMC]

Adam, great video. Just curios what blast cabinet you are using here and what pressure are you running it at?

[@adampaganelli4891]

Thank you! The blast cabinet is a mod-u-blast E series cabinet. Great cabinet that I found used for a good price. I recommend finding one in a similar category used to save money. The psi is around 80

[@CraftwerksMC]

@@adampaganelli4891 One other question and sorry to bother but I was curious what the brand and model was on those ovens. As weird as it is to say I have a much larger oven but I would like to pick up something similar to yours for small parts and doing single items, degassing small stuff and similar things like that. My 4 x 3 x 3 is great but cranking it up to do some MC calipers or a Master Cylinder is overkill, lol.

[@jeremyboje2247]

Good job man

[@adampaganelli4891]

Thank you! I’m glad you’re enjoying the series.

[@jmg.86]

How many lb of powder did you use to all pieces? Great work!

[@spydergs07]

Those small pieces should barely use but a few ounces.

[@mackmotorsports1447]

What air compressor do you use for your sand blaster

[@adampaganelli4891]

It’s a maxus 5 hp that does about 5.5 CFH at 90psi. It’s barely enough for the blaster so I would recommend getting something a little better.

[@mackmotorsports1447]

Adam Paganelli yah it looks like it works great when your sand blasting.

[@RanGer-498]

Walmart has that same oven Hamilton Beach 31107D for $74.84 cheaper than amazon and free shipping as well. Save some bucks...btw good vid.

[@alexsedlmeir7517]

Hey my englisch is not the best could you tell me the name of the colours you have used please because i didn't understand? This looks awesome😍

[@adampaganelli4891]

Anodized blue and super chrome

[@silkcustoms520]

Hey Adam, For sandblasting, what material do u recommend. I just got Glass bead delivered but did not try it yet. I used sand last time and worked ok. Thanks Bud. Mad Skills

[@adampaganelli4891]

Thanks Scott. I recommend using 100grit alluminum oxide for cerakote if you’re just doing powder coat glass bead works as well. A lot of powder coating shops use Garnett

[@nickd4579]

why would someone not tape off where the bearings go

[@WDuchx2]

What about the paint where the hook is ?

[@adampaganelli4891]

What do you mean?

[@WDuchx2]

@@adampaganelli4891 On the spring do you have to make 2 coats to cover the tiny spot where the hooks are ?

[@yeetskeetledeet8184]

What area are you from? I’m from tri cities in Washington

[@adampaganelli4891]

Nice man. I’m more in the Seattle area

[@Kipparimedia]

How much powder did you use yourself?

[@adampaganelli4891]

Less then a pound of each

[@aldenisarizapj2793]

what is that painting style called

[@adampaganelli4891]

Powder coat

[@mikecasey3055]

This is amazing man, I’m thinking about getting a powdercoat we from Eastwood.com I hope it works well. What do you think?

[@mikecasey3055]

Didn’t know you was using an Eastwood lol I take it it’s good! 😂

[@johnpickrell3028]

Great job, thx.

[@adampaganelli4891]

No problem!

[@TiaGaMer]

Hi Adam you are italian?

[@adampaganelli4891]

Yes!

[@diykrugliash9925]

Super!

[@rtharmon454]

So putting a shock spring inside of an oven isn't gonna fuck it up???? Yeah I don't know about that

[@miegoreng5412]

Nice adam who part5

[@davidheru8896]

👍👍👍

[@sttm1283]

awesome.