Powder Coating Your Lift Kit AT HOME *SIMPLE PROCESS*

[@Kyle-ut7ge]

I think you gotta throw some off-road/AT tires on to complete the aggressive look you have going with the tow mirrors and the custom grille. 33x12.50 won’t even rub terribly bad with a 3 inch lift, and the NorCal mod is relatively easy to do, plus I’d love to see you do a video of a NorCal.

[@CanadianArchaeologist]

Not sure how many other grandpas watch this but I like watching your projects. I hate spending too much time on KZbin but I got a few favorites I never miss, Cody's Lab, Weston Champlin and this one.

[@kh8473]

Get a cheap harbor freight sandblaster. I picked up the portable one that was $20 I believe. I also picked up a air filter for it and a bag of glass beads. Works great on my shop compressor.

[@RQProjects]

Hey for next time put a primer on under the powder coat, colour powder coat is porous so bare metal will rust under it. You can buy a zinc primer powder coat that works awesome otherwise just a rattle can etch primer to protect the steel

[@rcquadcoptersanddrones6048]

the black stay if you're using eye of the same one of my kitchen you got to watch the heating element in the oven sometimes they are known to just go up out of nowhere have hotspots no hotspots if you use them when that's glowing it can blow out

[@kaseykrumwiede7126]

For the Silverado you should do 35/12/18’s. Some cutting to fit but it would make that truck look amazing!

[@Jadyn-Winkler]

Hey Ryan! I have an air compressor a few years old I would be happy to give it to you!

[@lieutenantluka5860]

Im lookin for a air compressor 😁

[@Jadyn-Winkler]

@@lieutenantluka5860 You don't get the KZbin discount.

[@jrmendoza9141]

@@Jadyn-Winkler 💀

[@ashleyheinlein7116]

Maybe invest in a cheap sandblasted? Just saying with as much powder coating you do. Love your vids and love this build.

[@BertaRiders]

I wish my grass was turning green and I was out in a tshirt!! I still have snowstorms and a yard full of snow! Love your videos through this COVID 19!!

[@v8s4life48]

Good old school 16x12 welds and 31x12.5 tsl boggers for the cateye

[@Ohiocountryboy-se2cn]

They would only last 10,000 miles

[@mikehardeman6875]

I’m just going to be honest I can’t wait to see what your going to do with the Chevy but I would go with the nitto ridge grappler

[@kevinlynde75]

I was told by one of the nitto personnel that travels to shows, to show off the different types of wheels, that they are discontinuing the Nitto 420S and transitioning to the 420V so you might check first Ryan!?

[@gluttony627]

I have 305/50/20 nitto 420s on 12 wides on my 09 ram. I love them. Just wish they had some wider than 305. Only down side

[@domjuen3465]

Hey man ur my fav youtuber for sure and I love what ur doing with this truck it looks amazing

[@SosaGamer]

I love your videos because they give me the courage to try stuff myself

[@nicsea83]

I'm glad he's "honest".

[@dannyg_2377]

I fr look for a new video from you everyday😂😂 good stuff man

[@jordanjones2185]

Love the idea of the nitto 420s but an off road wheel would look amazing on the truck and would also be a good idea for what you are wanting to use the truck for... Love the videos man !

[@David-yl4pu]

Off road. You’re building it to drive in the winter need some grip

[@buffalofpv3996]

David howell off road grip and winter road traction are not really related tho

[@petermadonia1381]

Love the videos of powder coating! You should do a cold start on the 4 wheeler!

[@7.3_alltheway]

Hay, On my personal winter truck i would go for a luggy all terain tire but not a mud tire. Reason y is becouse u need siping and mud tires dont have that if u know what i mean. For snow and ice i would go with BFG KO2, Cooper Discovery AT3, Good Year DuraTrac, or Nitto Terra Grapler. I dont know how much snow and ice u have but those would be some of the best A/T tires on the market

[@dhbplusect7052]

you should make videos on transforming the look of the quad by powdering it and you will probably use up the last of your purple powder.

[@noelybarra1769]

Keep up the great work Ryan, looking great!

[@boxofkickz899]

Hey Ryan I’m a huge Ohio sports fan and saw you have a room with some memorabilia in there. Would love to see it in a video.

[@TheseBygones]

Indeed

[@travisredman196]

@@TheseBygones yessir

[@SwingingPineRanch]

Get a blast cabinet from harbor freight, would make prep work a lot faster

[@xvedit6104]

If you wanted to powder coat a design could/would you put your first layer down then spray your second powder coat over your first glossy layer. Like would it mess up the color putting it back in heat?

[@that.kid.shevon]

You should make all your videos this long because I enjoy them more this way

[@AndrewDoesLife]

I'd love to see a powder coat booth build video!

[@nicholashale940]

Love the way this build is coming along

[@KONG-RAM-TWIN-TURBO]

Nitto grapplers are awesome for the street with all terrain purposes

[@zachschwartz2343]

I would get American forces and def get a roll pan and color match u think it would look really good also color match the chrome on the front bumper !!!!

[@nuclearjack9278]

When your shirt says diesel fuel only but you own three gassers😂

[@rocketsucker1337]

Nuclearjack 927 I think you missed the giant green cummins?

[@nuclearjack9278]

@@rocketsucker1337 no, I was making the observation that he owns more gassers compared to diesel, yet his shirt says diesel fuel ONLY. I was just joking.

[@jiovanysanchez5168]

Nuclearjack 927 ha goooootem

[@willmcg7513]

@Christopher Covillon and the charger and the purple truck

[@sk8infreek]

Have you thought about getting a sandblaster? Not sure if you have mentioned that yet.

[@samcarpenter4862]

I bought the gun and some illusions cherry and clear vision but how hot and for how long for each coat? ( because of your sema diff I wanted one)

[@craigon6388]

the nitto420s would look good, but if you're building this to be your kinda "winter beater" you need something that will help get through all the snow and everything. just something to think about

[@jairovanegas6956]

That is looking cool alredy 😎😎😎

[@james10739]

For that bumper bracket you should have used some chemical rust remover for the low spots

[@dannygonzalez9964]

Its coming together nicely

[@neilbrinckman1990]

He'll yeah street truck would be sic mate. Huge offset.

[@terrypacker1192]

Looks great , thanks for the tutorial !

[@SRay-xy1pc]

Off road look will come together better

[@austinzoglauer214]

Love the videos man! Best part of my day!

[@powerstrokeforthewin5918]

I see you use a sander on stuff like those bumper mounts have you ever tried a wire wheel? I personally prefer wire wheels on stuff like that.

[@bangs2ndshotgarage865]

I’d honestly put some Nitto mud grapplers instead of 420s. Put those on a future low rider build.

[@jacksonbillions4921]

Does curing time depend on the size of what your coating?

[@Quatele-OQUA]

Bro did you think about power coating the front emblem green .. it will be fire 🔥🔥🔥🔥🔥

[@SlvrBckTCG]

To get deep into those crevasses use a wire wheel and a torch to burn off any paint that inside

[@firebull02]

Do you feel that coating old parts vs just buying new and coating is worth the time? It’s an older truck so I assume aftermarket is pretty cheap vs a long time blasting or sanding?

[@james10739]

I was thinking a wire wheel on the angle grinder for the rust and then the other stuff for smoothing

[@jakebrownell6935]

go with the nitto 420s for the street truck look i think it will look sick

[@josephball4245]

You should check out getting a sandblasting box to do little parts...

[@evanhord3038]

I’m all for the 420s on the Silverado!

[@ethandelconte9982]

You should do the off-road look

[@bambootaco4901]

How some merch love for us gas burners? You do own more gas burners than diesel, just saying. 🙂 Love the videos, keep 'em coming and I'll keep watching.

[@yungBitta291]

Time to start powdering under the hood stuff lol black green or purple

[@armandogonzalez6822]

The powder coated oven rack 😂

[@jesusalvarez1613]

One question were do you buy the powder and what powders do you need to get that shine finish i really want to buy that Eastwood set up and powder coat my own stuff

[@pokedave2948]

You should get Eastwood to send you a nice big air compressor, they have really nice ones, that will do the job EZ! As much as you promote them, they should send you one out for free!

[@CLDiesel02]

Brotha you need a shop, big time!

[@kiabass8798]

The build is coming along good

[@ntaylor0214]

Can u powder coat over body filler ?

[@skirving73]

you need a small Sandblaster would it be hard to powder coat rims? I woudl like to powder coat my factory ram 1500 Rims Orange

[@SR5JOHN]

If you’re lowering the 1500 which obviously you’re not I would say hell yeah do the 420s but nahhh if you want that kinda look on something lifted go with the nitto a/t

[@vdog502]

Nitto 420s or toyo proxes both r good I've had both

[@brycewhitworth888]

i don’t think street would be the way to go especially due to where you live the truck wouldn’t be able to handle ice on slick roads like you said you want it to personaly i think you should put some nitto grapps on that truck with some cheaper rims just my opinion

[@ddwitdarebel1017]

How come the color didn’t disappear like on the purple stuff you did???

[@haydenwestenhofer6151]

Look forward to the videos every day

[@johnnyortiz3844]

RYAN are you taking the hellcat to sema this year ? it would be a sick project 😎

[@Ls_swap211]

Why didnt ya do the bumper bars green just to add deeper contrast and you can see them briefly

[@RodeoJoe1981]

Go used wheels and show refinishing the wheel and powder coat them?

[@prestonwagoner438]

Please do a powder coat test like beat on it with a hammer and show us how tuff it is

[@Itsyeboy-vh5ox]

Love your videos I’ve learned so much

[@jeremymcjennett4744]

Street look would be dope!

[@pokedave2948]

On Govdeals.com type in Knoxville, there is a sand blasting cabinet kit for sale on there. You just need to register before you can bid!

[@pokedave2948]

Welp I was wrong that auction is over, but I found this one! www.govdeals.com/index.cfm?fa=Main.Item&itemid=299&acctid=7259

[@pokedave2948]

Dang it's in California lol

[@decker417ify]

Looks like you need a sand blaster now to add to the collection

[@KillaCowboy]

The wire brush you used for the Ford truck bed might have worked better

[@eirickchronister9528]

Once u see purple layed down,it’s in your blood there’s no other color ,lol. Looks cool dude

[@yungBitta291]

Hope you do a paint match and black rim

[@eddietrent3039]

What do you and Katie do for a living

[@Jp_5ive3hree]

Now you have me wanting to powder coat everything on my truck during this brake😂

[@corbenfournet9534]

Is that black ram grill hanging in the garage for sale?

[@Adams_Grage]

22x12 and Nitto 420s👍🏻💯

[@Adams_Grage]

I ran 420s for 2 years zero problems

[@KONG-RAM-TWIN-TURBO]

Nittos awesome choice bro💯💯💯

[@DJ_BFG]

I like how he put the Diesel Fuel Only stuff on the hood of a gasser.😂 The Chevy is coming along good though

[@connorlemmerman1512]

The code for Eastwood doesn’t work, just to let you know.

[@SlvrBckTCG]

Is ther a certain amount limit for the 10%off cause it’s not discounting with the code

[@jasonpriddy7828]

RIP ryan getting all that powder everywhere 🤣🤣

[@andynunez5585]

What torsion keys are they ?

[@TNT-SMOKED-U]

Definitely do the nitto 4/20 I wanna see them

[@jonsam360]

Hey Ryan I have a question I have a 1998 Dodge Dakota 4x4 sport I want to put a lift on it what would you recommend?

[@davidlong5755]

Even earlier today. Hopefully I can win this lift kit. I can come up for a video when it's done. Any idea when your going to be shipping the hoodies

[@kill3rhorsepow3r51]

Link to website access from KZbin don't work can't click on it

[@djnee572]

Welp looks like I need to get a duramax now.. Cant wear that shirt driving a gasser. But if you wanna add some long sleeve lftd shirts that’ll be a good replacement

[@ntaylor0214]

Need to get the Milwaukee battery palm sander

[@firestancegang132]

I bought Lftd sticker but how am I suppose to know how many entry's that gave me for the lift kit giveaway??

[@germansoriano1764]

Oh yuhhhh new video!!!!!!!!

[@fakeperson6678]

offroad look!

[@stannjessica]

Where did you get that metal diesel cap. My dad needs one.

[@ryan2546]

Amazon!

[@izeklogan4223]

Should of got nitto r triple 8’s for the hellcat

[@jacobvolk8676]

Go street truck looks the Chevy would look amazing