Power Locks and Power Windows on 2003 Jeep TJ

[@316napoleon]

Landon, you might try straightening the cable/actuator arm. It looks like that curve might be causing it to bind. I’m thinking if you’d mount the motor assembly in a manner that allows more of a straight line with the crank, it will move a lot quicker. You’ve done a nice, clean job. Great work!

[@landoneshbach2826]

Tamra Stanley thanks you! Yes, I've noticed that the driver's door has been especially difficult to get up and down. I think that would help a lot of my problem. I will definitely look into it!

[@JeepTJ]

Coool video! Where did you get the switches and the support? I have a 99 TJ with power windows and door locks, but the driver side doesn’t work anymore and there is no power lock of the tailgate. Very good job!

[@perjian1697]

The kit comes with spacers so you can move the manual crank spline in towards the door so it doesn't stick out as much since it's not used anymore. But you do have to be careful that you don't push it into the space the window needs to move freely.

[@AllAroundWheeling]

Hey how did you wire the 5 pin connector, and where did you get the switches from?

[@gk_sofresh9917]

Those little rubber things meant to catch debris at the top of the panel might cause some of the speed issues, I have to replace the ones in my driver door because It’s so hard to crank.

[@ralphm6234]

Do you have wire diagram for installing the door locks?

[@dontworry8669]

I did it the driver side worked but the passenger side rolled down but only went half ways

[@octaviolizarraga9141]

What is the name of the kit, id like to do the same, great video btw

[@jorgemorales8931]

I am in Tampa fl we’re you do this transformation ?

[@virginiagomez7442]

did you get covers for it ?

[@XCOINERX]

Hi. Where do you buy these kits...links? For locks and windows please...

[@daubie3]

Nice install and video. Link on the kit you bought?

[@landoneshbach2826]

daubie3 Universal Power Window Kit rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F331627712755 Universal Power Lock Kit rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F382414675962

[@corvelli]

What’s the kit called???

[@Dallascricket]

Man i installed it same way as u did but motor worka really really slow... I even try to oil it as well but still no luck... Order another one to see if i got a bad piece

[@landoneshbach2826]

Hasan Rafi I have started having problems with mine too, might have to go back to the drawing board

[@seanwilder3107]

So what did you do with the old crank handles? Did you cover them with something or just put them back on?

[@landoneshbach2826]

Sean Wilder well as of right now, that white piece is still sticking out. I would like to find covers for them at some point

[@edelgaldonez]

How long will it last? The power window kit is it operational until now? I've read some bad reviews

[@landoneshbach2826]

edel galdonez it is still operating, the passenger side works great but the driver's side has been giving me problems from the start. Might need a different motor

[@edelgaldonez]

Maybe you should lubricate the window sides

[@landoneshbach2826]

edel galdonez I've tried that a couple times, no luck.

[@crabbypadty393]

My question is why?

[@landoneshbach2826]

My answer to your question is why not?

[@fridder.]

I'd want door locks. It's convenient.. Especially if you park it in the street and don't feel like locking 1-3 key holes every single time. And stretching over to unlock the door for a passenger when you forget

[@franciscomagallanes622]

One of the many good things about TJ is not having to deal with power window issues and or wires/plugs to disconnect when removing doors.

[@mainevent19812009]

Cool

[@joychen852]

We are switches manufacturer from China,welcome contact with me if you need switches