03-06 Chevy Silverado Power Window Power Door Lock Conversion.

[@NoNamesGiven_]

Very well done! I did this job to my 04 civic base model, took me 15 hrs and some help from my dad. Nothing quite like power windows! Cheers!

[@DrivenbyGears]

Nice work!

[@Sip28]

Where did you hook up the power source?

[@NoNamesGiven_]

@Sip Vids I used a fuse tap and hooked it up to the ignition coil fuse. That way my windows were only powered with the key in the ignition.

[@Sip28]

@@NoNamesGiven_ I’m so stuck because I wanted to use a fuse tap but they all said 10amp maximum

[@NoNamesGiven_]

@Sip Vids The ignition coil on my civic was 15A, and it was fine for two years. It was just powerful enough to handle the drive window, the passenger side window got stuck sometimes, I had to reach over and physically pull the window up while pressing the button. It's a good kit for $100. I had to scrap the car two months ago, too told and too many problems. I miss it so much still..

[@jewllake]

This guy took his time and put pride in that aftermarket kit and made it look good.

[@DrivenbyGears]

Thanks

[@thegamingchanel100]

Thank you so so so much, I just bought a 03 because it was a good deal the owner before me already converted it to power windows but I wanted to do the lock and never knew how. This helps quite a bit and will defiantly be looking at this in the future!

[@DrivenbyGears]

No problem

[@Macetrow]

Coming here 3 years later, thanks for the video! Came here to see how you modified the door panels for the switches. Will be doing this on my 01 Sierra 2500hd

[@charlielowell4077]

Great video. Thanks so much for showing where you got the 12V for the batt & ign supply! So many videos exclude that. You're great!

[@Pitman556]

What's the tan box called he pulled the power from? I want to buy a plug that fits if I can

[@martinhollins7727]

Just gave me the motivation I need to go ahead and pull the trigger to do mine!

[@DrivenbyGears]

Oh yes

[@LesterSuggs]

Thank you for putting this video together. I have to do this same kit on my 2006 Silverado WT.

[@DrivenbyGears]

No problem thanks 4 watching I actually have more then 1.

[@rickbalderas4033]

Same here, just got an 06 regular cab for a good price. However it has manual windows :/

[@DrivenbyGears]

2 WINDOW POWER WINDOW LINK ebay.us/YamP9t 4 WINDOW POWER WINDOW LINK ebay.us/ruFZ5x DOOR LOCKS LINK ebay.us/YVqoQ7

[@DrivenbyGears]

Happy Sunday!!!

[@jimmarchman]

Good video. Wish I would have found this one before I started my install. Luckily I'm less than halfway through so your pointers will come in handy. Thanks!

[@DrivenbyGears]

Nice

[@jimmarchman]

@@DrivenbyGears So, I grounded out something in that little electric panel under the dash you hooked into. No power now and I can't find any info about that panel anywhere I've looked. Ugh.

[@DrivenbyGears]

@@jimmarchman look for a blown fuse

[@finallyitsed2191]

You did a great job explaining everything and with your filming in this video. Very helpful, thanks!

[@DrivenbyGears]

Glad it was helpful!

[@brian1275]

Hello,I put the same kit on my truck but only go Down the window but wend is goin Down it only raises it halfway and it stays stuck.

[@95ckemper]

Hey man just wondering how the power window kit was holding up after a year. Thinking about doing this soon!

[@starfishbandit5633]

Just buy two doors from a junk yard that have the power windows and door locks and move the lock from you're truck. so much easier than modifying your doors with a kit.

[@gabrielrosalesprieto9969]

@@starfishbandit5633 thanks man was thinking it was easier but dont see many people doing it

[@justind9631]

@@gabrielrosalesprieto9969 yea it would be way easier than doing this

[@wippywoppie123]

@@starfishbandit5633how would you wire it all up? Just new to this kinda stuff

[@shuy2865]

Man, that was a very good installation. Thanks👍🏽

[@MrBritrider]

Good video thanks. I have a 2010 reg. cab all manual door stuff. My manual door locks are not like your ‘03 mine are located on top of the door panel and pull up open push down lock. Will this lock mechanism work for me?

[@gumarovenegas175]

great video man very well explained do you know if this kit would work on a 2000 silverado?

[@francis5944]

Nice work man.

[@javiercruz7388]

Awesome just what I needed you the man!

[@DrivenbyGears]

awesome np

[@Zacharykinder]

How am I supposed to wire it up from both doors? I’m not really good at electrical or anything so if you can help me out, that would be great.

[@sevas1224]

Nice video man! Thumbed up and subbed. Could you make a video on how to install power side mirrors? I imagine the same thing but still be cool to see.

[@DrivenbyGears]

I'll see what I can do thanks 4 watching

[@DopeTheft]

Definitely doing this soon 💪‼️🔥

[@antoniorios9208]

Were did u buy the kit brother ? Thanks looks perfect

[@DrivenbyGears]

Look in description above there is links. I bought on ebay. Thanks 4 watching.

[@juan14964]

Really good video & great job

[@702xRyder]

Nice I'm a do it on my 04 just the power windows

[@billy2423]

Have a 2004 manual doors and bought 2 auto power windows w/locks doors complete. Will the wiring harness just plug and play?

[@blacknova28]

How has the power windows held up?

[@dontworry8669]

I I talked this not to log ago but then one motor messed up I recommend for you to take it so they can install it like if it was oem

[@DrivenbyGears]

I've never had problem

[@dontworry8669]

Driven By Gears it was only one I am going to buy another kit cause the other one works good

[@DrivenbyGears]

@@dontworry8669 if you install them in a bind they will not last long plus need lube up your tracks and window mechanism so can move freely.

[@Itsme83.]

What if I wanted to add courtesy lights? What wire would I tap into for that? My work truck has no lights or dome light

[@gmctx5487]

Some good info.Keep it up brother👍

[@DrivenbyGears]

Ty Sir

[@phillipblades6784]

I have a 2005 Silverado regular cab base model. I think I would just need to make mine look just like yours. I’m trying to upgrade my truck to the LT level. Power windows are a must have for my project. I just can’t afford all the OEM parts. Videos like this are my inspiration for sure. You show me what to do and how to do it. That is, without spending a boatload of money on the OEM parts or having to reprogram the truck’s computer. Thank you. Edit: This just occurred to me, could I just buy the OEM door handles, with OEM switches and use those switches with this kit?

[@anthonyduarte6001]

How did that work any luck with the oem switches?

[@phillipblades6784]

@@anthonyduarte6001 I was just asking a question myself. It maybe 2 or3 years before I can save up the money I need for this pickup project. I was asking if I could just use the OEM switches so it would look more stock. It’s on hold right now for sure.

[@Tieigo0]

Yes you can use OEM door cards with the OEM switches, you just need to poke to see which ones are the lights and the up and down. (Two connectors for the up and down, two connectors for lights, when you turn on the headlights)

[@1Corinthians15.1-4]

​@@phillipblades6784 Yeah you should be able to. Every power need requires positive and negative. You could even cut off the OEM switch and replace it with another to make the connections fit better. Manufacturers all like using their own switches to make it more difficult to modify but it's all the same positive and negative.

[@jorgesosa-tz3sr]

for a power window....just go the yunke yard and buy a motor window from any suburban and find the right wire in amazon...

[@rafasantana1188]

I have a 2002 saw. I'm gonna be cool about the change, but I just want to know what the kit you bought so I don't get wrong when I ordered it

[@DrivenbyGears]

Link in description

[@brickhouseconstructiondesi8051]

Nice . I went to the junk yard and found a 2006 Silverado identical to mind . But it had power windows . I removed all the power windows the electrical harness . and I got home to install it and the power harness configuration was different on my vehicle can you leave me a link to where you got your universal kit from thanks

[@M0NKEYYMAN]

Hey man I having a hard time finding the parts I need to change it could you make new links for Amazon because 2 of them don’t work

[@nbsted]

So we’re you able to to have both switches on the driver side and then a switch on the passenger side aswell?

[@diegofurlong1199]

good job, looks great

[@DrivenbyGears]

Thanks

[@harleyserrato6908]

This kit doesn’t need a relay for each motor in the power window units?

[@mariahadams972]

Is there a wiring diagram that you used? Mine didn't come with one.

[@DrivenbyGears]

Yes

[@alfredoreyes8661]

@@DrivenbyGears do you have the wiring diagram mine doesn’t have it either

[@DrivenbyGears]

@@alfredoreyes8661 I'll see if I still have it . It's been awhile since I did this mod

[@lacopina8689]

What if my truck came with manual windows and I bought oem doors how do I wire them up do I use the same wiring that comes with the kit

[@DrivenbyGears]

Get oem harness from junkyard

[@Raulb1377]

Where can I find the complete kit? Windows and locks? Or did you buy then separately?

[@FlatBrokePerformance]

Did you trim anything for the locks? I installed the same actuators in the same exact spot but they are rubbing against part of the door panel I believe, I can barely move them by hand.

[@Itsme83.]

Where and how did the key fob receiver hook up? Thanks!

[@Cesaraguilar-e9p]

Quick question why not switch over an electric oem window motor ?

[@MiguelSanchez-rb3tw]

I have the door poppers cuz i got an alarm installed. Do you think theres a way to wire the original unlock buttons on the inside with the poppers? Gets annoying opening passenger door lock from the inside. Mine automatically lock when the truck turns on

[@LesterSuggs]

My window motors have pink & yellow wires and the switch harness has blue & green (like yours). Can't figure out which goes where. Also the switch wires can connect to the switches in either direction. I'm not liking my kit.

[@ryanbuck5253]

What are the few minor issues you speak about at the end? Why do you not tell us? I would sure like to know.also what about rolling it up and down, will it blow the gears off it if you hold the button down after it all the way up or down?

[@DrivenbyGears]

Only minor issue was getting door panel back on , and no it won't if hold button down

[@PROATV13rb]

@@DrivenbyGears thats to funny. was it the door lock?

[@DrivenbyGears]

@@PROATV13rb yea there is a hold post right in middle of that door actuator but it didn't hurt anything.

[@ryanbuck5253]

Driven By Gears how is it holding up?

[@DrivenbyGears]

@@ryanbuck5253 great I've had it on my obs for years never any problems plus its a cheap kit in price. Try to go cheap with oem stuff and see how the figures turn out.

[@alihanon5619]

Nice video man 🙏🙏👍

[@OGKILLa9365]

You can use some oem 99-02 window motors instead of that cheap window motors that attach to the roll up mechanism. And just wire them the same way..

[@DrivenbyGears]

Ok 👌

[@lacopina8689]

Have you had luck wiring oem doors to the kit harness

[@OGKILLa9365]

@@lacopina8689 you can use 99-02 window motors and switches the same way he wired the aftermarket ones. As far as the 03-06 switches they wont work because they run off the BCM

[@gabrielrosalesprieto9969]

Does the duze with the power windos keep on burning with u??

[@ram1362]

Great Job 👍

[@michaelcastro6505]

So say I want to change my truck into power locks but i already have an a alarm system how do I get them to run as one?

[@faz.THR33]

I skipped sum of my videos to get a quick preview. so @8:42 was when I realized i went too far

[@Hobson92]

Installed it all today, everything works great except my key fob is backwards. Any advice?? Tried flip flopping green and blue wires and it didn't matter.

[@DrivenbyGears]

Got make sure we're you mounted the sliders that when hit the key fob unlock its actually unlock on door too or it will be pushing in wrong direction if you know what I mean.

[@alejandrogerman4984]

Can I connect my viper alarm with the power locks?

[@nickalvarado4537]

Awesome video thank you

[@rinku8260]

Did the key fob come with the actuator’s or did you get it separately?

[@PROATV13rb]

have you seen the a1electric.com kiT? GM83-109A-K? ITS $244 BUT LOOKS LEGIT LIKE THE STOCK SET UP/

[@DrivenbyGears]

No i havent..

[@reidbridges2488]

Hey im very new, could you tell we what each wire goes to color by color?

[@josequintero7632]

Do power locks need to be closer? I have them where you had put them but mine dont lock or unlock idk if i need to be even closer?

[@DrivenbyGears]

Got it to tight? Make sure tighten them in right direction

[@matthewf3459]

Do you think it would work on a chevy car? because i have a 99 chevy prizm with manual locks and manual windows and i would want to make sure it would fit before buying. thanks!

[@DrivenbyGears]

This is a universal kit that will work with and roll up windows

[@typicaltiller2594]

Can you change the key fob after installing this or do you have to use the one it comes with?

[@DrivenbyGears]

Idk

[@skylerhitchcock4896]

Can I use any key fob? I have a aftermarket 2013+ style key fob for these model trucks lying around and I just picked up a 2006 2500hd and I want to convert it but I’m wondering if I would have to use the provided fob

[@DrivenbyGears]

idk

[@ethanreddish5542]

How did you install the window regulator

[@rodolfocaraveo8642]

If you use the driver’s switch to pull down the passengers window does it work?

[@DrivenbyGears]

the driver side has two switches for left and right the passenger side only has the one for the right side.

[@jimmysupra5881]

Do you know if you can use stock buttons for the windows instead of putting in your own?

[@DrivenbyGears]

Idk wouldn't hurt to try

[@jimmysupra5881]

@@DrivenbyGears thanks for the quick reply appreciate it. Also another question how did you get the wires through the middle tube on the doors is it open and you just stick the wires through or is there anything you have to do?

[@DrivenbyGears]

Clothes hanger feed it threw the boot tape wires on one end pull them into boot to other side.

[@jimmysupra5881]

@@DrivenbyGears holy crap that is smart lol. There’s no cover on the boot correct? It’s just open

[@DrivenbyGears]

Correct

[@fcamtero]

how is holding up today since you installed?

[@luisgodinez162]

How do you search for and where did you bought it from please?

[@Retro_Fan]

Can you please update the link to the power locks?

[@stevecorner5069]

Did you have to use relays in the wiring for windows and locks for reversing the power?

[@DrivenbyGears]

Its all included in the kit no extra parts needed.

[@stevecorner5069]

@@DrivenbyGears Thanks for the reply. I assume that you did have to use relays for the windows and locks, although I didn’t notice you mention them or see them in the parts that you had laid out on the tailgate.

[@DrivenbyGears]

@@stevecorner5069 im guessing its in that little box that comes with it or maybe built into the motors

[@stevecorner5069]

@@DrivenbyGears Hmm...... mine didn’t come with any little box thing, just the wiring and switches. Must be some magic in the box that you have, as something is required to reverse the polarity for windows up and down. It looks like I will have to get some relays to make it work. Thanks for the reply and the video you posted. It will help me to locate the best spot for the motors and door lock actuators. Cheers!

[@stevecorner5069]

Update. Just found a video from Lessco Electronics that explained the need for relays. If the switches are 5 pin, they can be installed with or without relays as the switch has the capability to reverse the current. Turns out my kit has 5 pin switches so can install without relays. Hope this helps others and thanks for your assistance and for providing the video. Cheers!

[@brandongrover1168]

For mounting the door lock actuators, did you drill holes? And did you use the screws that came with it to mount?

[@DrivenbyGears]

Yes had to drill holes, did you watch video?

[@brandongrover1168]

Driven By Gears I did, must have missed it! Pretty loud environment where I’m at. Thank for the super quick reply :)

[@DrivenbyGears]

@@brandongrover1168 yea I positioned it about were it was good and took small bit and started the holes definitely use a hand screw driver on the cheap plastic when thread the screws

[@RaineLutz]

How have these been holding up? Debating grabbing a set or getting a new truck but I'm worried about how long they'll last.

[@gregoryseals1]

I have a 2001GMC Serra single cab. Where did you order your kit?

[@jeylaw3893]

There's 2 Brown wires in that kit for the lights , did u connected them?

[@DrivenbyGears]

Yes

[@DrivenbyGears]

Why you need power from the key or you will run battery dead

[@franksilva3302]

How’s it holding up?

[@codydonovan7356]

Will this work on an 2002?

[@M0NKEYYMAN]

Am I still able to unlock the door with my key if my battery dies

[@matthewsalvador9783]

How would I convert my automatic windows to manual?? Reason being done tired messing with switches

[@DrivenbyGears]

Just find a donor vehicle

[@Eric-pi8hi]

Would this work on a 03 Silverado single cab but I have Manual windows but my locks are power

[@DrivenbyGears]

Yes it will

[@orlu5867]

That location blew my SEO IGN 10 amp fuse under the hood the next day and the window kit runs an inline 30amp fuse. Did you have to same issue ?

[@DrivenbyGears]

Did you hold the switch down or try to roll them down same time?

[@DrivenbyGears]

Just move it to a 30 amp spot

[@AlexRamirez-jl1mv]

if i have a 4 door can i just buy two sets of the same kit and connect them together?

[@AlexRamirez-jl1mv]

and does all the wiring come with the kit ?

[@DrivenbyGears]

There is a four door kit and yes wiring does.

[@aldorodriguez4883]

Where did you get that kit i wanna do that to mine

[@dabvwm1096]

Would this work for the rear doors for crew-cab truck?

[@DrivenbyGears]

Yes there is a 4 door kit

[@hunchovilla5993]

What did he used to connect to the accessories at 8:05

[@DrivenbyGears]

I'm only hooking up what comes with the kit.

[@hunchovilla5993]

@@DrivenbyGears what if they don’t come with nothing to hook up , what do I use ???

[@DrivenbyGears]

Find you a power wire some where on that fuse box.

[@nathanieltorrez8167]

I can’t find a way to power it, I have a 2002 serria any help?

[@DrivenbyGears]

You use a meter check all the lower empty slots

[@jesusprado9048]

I wanna do This to my Chevy Silverado 2002 extended cab but I wanna go convert back to manual .

[@AntoineFinch]

Its to bad they dont have a 4 door kit?(power windows)?

[@DrivenbyGears]

They do its on ebay

[@eleazar7962]

Will this work for a 99-02 Chevy Silverado? Great vid btw 👍

[@DrivenbyGears]

Yes sir the door lock might be in different area but yes.

[@juanmoreno5187]

Have you did it on 99 yet

[@DrivenbyGears]

@@juanmoreno5187 no but I have a 95 obs but the windows will be the same.

[@juanmoreno5187]

Driven By Gears oh alright thanks

[@adambooth5067]

Did you have trouble getting the door panel on with that lock location?

[@RossPetrarca]

I am having trouble getting my panel back on with the solenoid in the location...

[@Dylanmarsh00]

So I installed mine and it’s having a really hard time rolling the windows up and down. Any recommendations on how to loosen it up?

[@jameshuban6515]

That's what I'm scared of. My windows on my 2000 Silverado are very "snug/tight". Especially if they aren't operated on a regular basis. I'm scared those motors and gears aren't strong enough. My brother had a similar problem in his 88 Bronco. The gears would strip.

[@xNawfy]

squirt some wd40 on side of window channel where the windows slide down

[@XJrEditz]

Where did you connect to power tho?

[@DrivenbyGears]

Did you watch the whole thing?

[@gregoryeighmy5239]

Does it come w a switch for the passenger side?

[@DrivenbyGears]

Yes there is even a 4 door kit

[@KevinReyes-z7o]

Where did you get that kit

[@purochikano1]

Can I do this to 2005 ford f150🤔

[@DrivenbyGears]

its a universal kit i dont see why not.

[@thomasmalone7865]

Where can I get a kit to do this in my 2004 S1500?

[@DrivenbyGears]

Kit is universal will work with any cranks

[@alihanon5619]

Do u have the link of the kit ??

[@thomasaguerria3519]

Can you connect the power locks to another key fob? I just ordered a Compustar 2WG15R-SS Pro remote among with the other things for remote start and security system. I didn't realize that I needed to install power locks, ik how dumb can I be? I want to just get the power locks to complete the setup, but have yet to find any that say they can connect to another remote. If anyone knows, please help me out.

[@DrivenbyGears]

Well the brain for your new key fob should have power wires for power locks so just splice that into the brain from the power lock kits and they both should work. Or use it as a stand alone brain.

[@thomasaguerria3519]

@@DrivenbyGears thanks. I think I actually understand this

[@alfredtorres3913]

Is there a switch for the power locks on the door?

[@DrivenbyGears]

Unfortunately no its a key fob

[@alfredtorres3913]

@@DrivenbyGears I suppose it ain't a big deal pressing the button on the remote to open the doors. What's your experience been? I'm just thinking of when i need to open the door for a passenger.

[@DrivenbyGears]

@@alfredtorres3913 jist press the key fob on the keys in the ignition

[@dairamacedo9148]

I have a 06 Chevy with manual windows, do you think I can just buy electric doors and connect them? Or is this my only option?

[@DrivenbyGears]

If got that kind of money by all means.

[@the_drifting_kings_1871]

Just get the door panels this looks ghetto asf

[@DrivenbyGears]

@@the_drifting_kings_1871 it's not that easy there jabronie

[@the_drifting_kings_1871]

@@DrivenbyGears these trucks for the most part are plug and play a little research or some money for someone to get it done is better than having a non OEM looking door

[@DrivenbyGears]

@@the_drifting_kings_1871 yes door wise anyway but have you ever tried to dig out that whole harness under the dash??? But anyway.

[@emmanueltena1974]

Do you think this would work on a Dodge Ram too?

[@DrivenbyGears]

It works on anything its universal

[@toe951]

Where did you buy all the stuff for it?