Power Your Home With The Tesla Cybertruck!

[@YaksAttack]

As a professional electrician, i would recommend you install a manual transfer switch with a 50a inlet. It is more exensive than a panel interlock kit, but it saves wear on your main breaker. I never turn a main breaker off, because when they are older, they will sometimes turn off and never turn back on. Do not use a widowmaker plug, and do not operate a backup generator (or in this case your cybertruck) without an interlock that prevents backfeeding the power grid. Peoples lives are more important than your convenience/not wanting to spend a few hundred bucks.

[@midlifegoddess]

Oohhh! This is so exciting! Love your channel.

[@alzamboti8639]

How is the possible without the floating neutral issues you get with a F150 Lightning. I like this possibility.

[@gocybertruck8189]

Good info, but it's too risky for the expensive Cybertruck. If you want to avoid the installation labor cost, consider getting the Powershare equipment and installing it yourself if possible. Doing it the right way will save lives and protect your Cybertruck from potential risks.

[@unijabnx2000]

Why not put a generator inlet on the outside of the house and just get a normal (m -> f) power cable.

[@jamesbruce1183]

I have installed a generator inlet and interlock kit (see Amazon) and it was no more difficult than your 240V socket installation on the side of your house. Advantages - No widowmaker cable and no chance of back feeding the grid. If you have solar be sure to turn it off before connecting the truck.

[@eEvangeliste]

Brand ? Link for the inlet ?

[@j.clintonmcmillion7006]

Thanks for the video

[@AshwinPulla]

Nice video, can you provide the link for male to male 240 volts Nema 14-50 cord you are using? So this works without all the requirements from Tesla as stated below TESLA - You need to have the Tesla Universal Wall Connector with Powershare Gateway installed in your home.

[@elborikua951]

widow maker? Bruh, you could have simply installed a power inlet containing the male end of the connection. 🙄

[@jennifermoceri1284]

Did you make sure to check the fender and the bender before you started? 😂

[@S2kBPRIME]

What tonnage ACs are you running? Great vid!

[@Pollyer-p6l]

Hi Evan, can we sponsor cybertruck accessories to your KZbin channel？

[@desertrat1606]

It would cost only a few hundred more dollars to do this safely.

[@rogerstorz2091]

Please explain how you would make it safer