Building A Twin-Turbo-Capable 420-inch Gen III Hemi For A SRT8 Challenger

Building A Twin-Turbo-Capable 420-inch Gen III Hemi For A SRT8 Challenger - Engine Power S3, E12

Рет қаралды 50,141

Күн бұрын

Пікірлер: 78

@Nick-rn7uh 4 ай бұрын

This is the best episode to date , probably because I've had a fully refreshed COVID build gen 3 sitting in my shop as a conversation piece rather than in a usable piece of equipment. Thanks guys , and I like the color too

@looneylonzo28 4 ай бұрын

finally, some more Mopar Content and I love the platform and the ability to make a 5.7 in absolute monster with its larger displacement, brothers parts. traction will always be an issue. I know Spinning ain’t winning but its fun.

@1sweet_ta 4 ай бұрын

Thank you for the gen3 hemi love!

@saleen367 4 ай бұрын

A blast from the past. 🤣

@LukeEdward 4 ай бұрын

Y’all commenting realize how old this show is, right? 2016! Awesome and always worth the watch, especially with the lubricant overview.

@larsjrgensen5975 4 ай бұрын

Maybe get a longer laptop cable for the dyno, if the prop shaft breaks or the rear wheel blows up you can end up dead if unlucky.

@grapeknutz 4 ай бұрын

Good god, at least chip the paint off the block!!!

@motorhed__4333 4 ай бұрын

Yeah! Damn guys!

@BF26595 4 ай бұрын

Remember, this is a really old episode. They grew a lot on quality over the years... This episode was not long after the first release of the Hellcat Challanger, so aeons ago...

@Vee068 4 ай бұрын

I was just thinking the same thing 🤣🤣🤣🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️😆😆😆

@jamesgeorge4874 4 ай бұрын

A pair of GT35s , and forged rods, and pistons, and 800 wheel should be cake.

@TrumpAmerica-2024 4 ай бұрын

about time y'all show a true American muscle car engine build.

@ethancooper1127 4 ай бұрын

When haven’t they made these type of videos

@TrumpAmerica-2024 4 ай бұрын

@@ethancooper1127 all they show is gm and ford junk.

@adamg3911 4 ай бұрын

Should have kept the piston oil squirters for a pump gasoline focused build. Would be cool to see a twin turbo tow focused build, or an endurance racing build for a track hawk while utilizing pump gasoline.

@AsswipeGarage 4 ай бұрын

They didn't fit. They showed that.

@Davejust451 4 ай бұрын

15:52 min, That looks like something out of Star Trek.

@chuckee1987 2 ай бұрын

The Klingon Bird of Boost

@TundeEszlari 4 ай бұрын

Cool content.

@yarrdayarrdayarrda 4 ай бұрын

4:10 That block should have been thermal cleaned (baked) to remove all that ugly paint and rust.

@villiersman951 4 ай бұрын

yep my thoughts as well

@ALs_Autos 4 ай бұрын

Luv this channel ❤

@josephgaydosh7300 4 ай бұрын

I would have relieved all the edges and sharp corners on that block

@VampireHunter28 4 ай бұрын

😅 That crankshaft ....

@KurtBenning 4 ай бұрын

Nice!!!!!

@Krazy44Krazy 2 ай бұрын

I wish I grew up with Mike ! ( You have no idea )

@yarrdayarrdayarrda 4 ай бұрын

4:98 6 bolt design Pat, just like an LS?!?!?!

@AMeZoRaCiNG 4 ай бұрын

@@yarrdayarrdayarrda that’s what threw Me off. Even PAT shoulda been sharp enough to refuse that voice-over scripted lie🤦🏾‍♂️

@freedomfighter5095 4 ай бұрын

Still waiting for the NORTHSTAR build. I challenge you! DO IT

@RainerTrkulja 4 ай бұрын

Hi there from Australia Will engine grout interfere with over heating issues on the street use.thanks from Rainer from Cairns Australia.

@overyonderjustapiece 4 ай бұрын

6.125 rod, LS 0.927 pin, LS 1.5, 1.5, 3.0 rings? LS Anyone else picking up on a trend? The Ford Godzilla did the same shit. Used LS roller lifters and trays in theirs, along with several other items that were damn near spot on identical to LS. Had they not made such GIANT gaps around the cylinders to allow for machining in a fire ring, the blocks and heads would have been able to handle a LOT more than 1000 hp before lifting the heads and torching the blocks.

@jamesgeorge4874 4 ай бұрын

Yeah LS stuff is a lot cheaper than Mopar stuff, and available in more configurations than Mopar stuff.

@jelenekoutdoors9023 4 ай бұрын

Um where's the other 2 studs for the main caps.....just like an LS 😂 ok Pat if you say so 😂

@vickypratamaputra4363 4 ай бұрын

2010 Dodge Challenger SRT8

@JustinMiales 4 ай бұрын

The paint is Dino heat tested ? What does that mean ?

@michaelreeves7758 4 ай бұрын

My 4 years of High School has me only counting 4 bolt mains, not 6.

@Krazy44Krazy 2 ай бұрын

Look at 😂 those cylinder bores 😂 …..

@Floydf0st3r 4 ай бұрын

I feel like I watched this episode a couple years ago

@platinumwearer20 4 ай бұрын

You did. PN2 is old episodes

@Arthagnou 4 ай бұрын

Bout time dudes! (easy to be judgmental if you dont have to pay for it)

@billballin6948 4 ай бұрын

6 bolt mains? I’m only seeing 4 bolts (2 on the main and 2 cross bolts)

@dinkydotzero 4 ай бұрын

You all should so a where are they now show, It would be nice to where Mike is these days and Rick Bacon etc

@mikemakuh5319 4 ай бұрын

Where are the other 2 main cap bolts?

@Skunkman001 4 ай бұрын

Hate too tell you...but...I have pulled that motor out, without dropping the sub-frame....

@JohnBoyBuilds 4 ай бұрын

This episode is old asf

@lilapa7 4 ай бұрын

I wanted to put a hemi in my 2000 jeep grand cherokee swap it out...

@gnarlytothemax 4 ай бұрын

hemihemamon

@CyberSnypa 4 ай бұрын

Sam tech school lol. Kids go to real school

@upnorth6722 4 ай бұрын

Lost me at painting over all the loose paint on the block !

@eclipsegst9419 4 ай бұрын

The Thumbnail "Yeah it's a HEMI" Gen 1 and Gen 2 owners "That's debatable"

@AntRielly 4 ай бұрын

It's actually an LS based Hemi.

@eclipsegst9419 4 ай бұрын

@@AntRielly it's more that the chambers aren't actually hemispherical they are more like hexagons.

@MitchellValentine-pr2lt 4 ай бұрын

You left the old paint on the block? Not professional IMHO

@giggiddy 4 ай бұрын

I'm not making excuses for what they did 20 years ago when this was recorded. But they were under an impossible timeline and budget. So if it meant more cash and time spent on internals. The block exterior lost out.

@TrumpAmerica-2024 4 ай бұрын

@@giggiddy it's from 2018

@howardwilliams8993 4 ай бұрын

@@TrumpAmerica-2024 2016

@TrumpAmerica-2024 4 ай бұрын

@@howardwilliams8993 give or take two years

@motorhed__4333 4 ай бұрын

Shitty job cleaning the block! You can see the old paint about to flake off man geez!

@AMeZoRaCiNG 4 ай бұрын

The mains are NOT a 6 bolt design like Chevys LS motor. That’s a blatant lie. I don’t know how they let that get to the public. Makes Me question who really has the true knowledge at the company/channel🤦🏾‍♂️

@AMeZoRaCiNG 4 ай бұрын

@@19chev81 last time I checked My eyes worked pretty good. I only see the 2 that’s studded and the 2 cross bolts. PLEASE explain where these magic bolts are hiding🤦🏾‍♂️

@Valverde713 4 ай бұрын

@@19chev81 no they're not the hemi is a 4 bolt main

@wkjeeping9053 4 ай бұрын

Its only a 2 bolt mainz. Those sides ones are there to make the block stronger. There is ftermarket blocks that are true 4 bolt mains with the side bolts a little bigger for strength

@Valverde713 4 ай бұрын

@@wkjeeping9053 no wonder they don't last

@SuperSmellySocks 2 ай бұрын

You put those ugly ass rims on a fukn astro stfu

@overyonderjustapiece 4 ай бұрын

Also, WHY would they not have SAM school go ahead and bead blast and bake the block to get rid of that shit original paint. Their decision to paint over that garbage made the whole build look like garbage.