The best work i have ever seen on youtube....Your a genius....
@Commsprepper5 жыл бұрын
What model is your volt meter in this video?
@jamie961298 жыл бұрын
I had a feeling that your unheatsinked fets would over heat. I made the exact same mistake when I fixed my inverter. only mine blew up properly. Nowadays I always heatsink before I test.
@UmbreWolf11 жыл бұрын
Careful, most VR1 pots (As far as my experiance with working on inveters) are (normally frequency adjustment Pots for the factory to set based on normal differences from product to product. This may not apply to all inverters but with the many I have messed with over the years, Its normally what its there for, and with some a VR2 is normally output voltage. Depends on the construction of said inverter as well as the design of them
@keithbyrd106 жыл бұрын
Great video. What's your take on the Aims 5000 inverter. Thanks
@randacnam732110 жыл бұрын
A good thing to do with those transistor clamps is to stick a small rubber equipment case foot to each transistor contact point on the clamp.
@knurlgnar2411 жыл бұрын
Could be, that'd be my first guess. My second guess would be an output current limit adjustment. In the end I decided not to mess with it for various reasons.
@fordtrbo7 жыл бұрын
Great video! I have a travel trailer and I want to run my Dish network satellite system as well as the 32" LED TV and DVD player at times. QUIETLY! Campsites do not like NOISE after 10 pm. Is a 1000 watt Samlex pure sine wave inverter enough? Will be running an extension cord or Romex approximately 25 feet from the inverter. 12 or 14 gauge ok? Thanks for the information in advance!
@SolarBuck4 жыл бұрын
Can you use a p65nf06 in the place of a irf 3205? I have a CyberPower 1400VA Pure Sine wave UPS I am trying to repair and I don't have any IRF 3205 MOSFET but I do have some p65nf06 laying around that camoe out od Cyber power 425VA. My concern is one was used in a Modified Sine wave and this is a true Sine wave. I think the Controller is the key to the Pulse width modulation to create the better sine wave. In a pinch do you think it will work or is this a really bad idea? Thanks!
@curtchase373010 жыл бұрын
Put some socket lube on the threads of the test lamps...ok? My dog ran out of the room when he heard that horrible squealing! LOL.
@richarddowner429211 жыл бұрын
hey I know you can fix them!!!! the 1500watt 1 I bought from you is still working... so after you fix them how much do you want?????
@mewantbrains9 жыл бұрын
Where did you get your multimeter from and how much did it cost I need one with an oscilloscope like that
@audiocrush9 жыл бұрын
+mewantbrains you need or you want? :D If you need a scope you should really ask yourself if it has to be that portable... Also the device used in the video is really not a proper oscilloscope... In terms of functionality you can get the same quality with an arduino and a cheap dot matrix display.
@mewantbrains9 жыл бұрын
I mostly need something that is relatively cheap and highly portable so I can fit it in my toolkit
@knurlgnar2411 жыл бұрын
Running it without a heatsink is the best way to verify that it functions properly for various reasons. It's actually 'stupid' to assemble it fully before testing - a mistake that is so tempting to make and one I've made many times myself. But I ran it too long while I blabbered on about something - oops. :)
@drezster11 жыл бұрын
knurlgnar24, you're a bloody comedian :) Loved the unboxing.
@andrzejsjz11 жыл бұрын
Ale gość. Obciążyć przetwornice bez radiatora. Nobel
@danilobaca79014 жыл бұрын
nice job dud
@UmbreWolf11 жыл бұрын
oops should have waited til after the unboxing to post that comment, haha, get either working yet?
@UmbreWolf11 жыл бұрын
Sure hope you didn't pay that much for them but part of me thinks you already know they where busted and you got them with an attempt to fix them, good luck though.
@MrMacroVision11 жыл бұрын
magic smoke!
@kf7tkj11 жыл бұрын
Uhhhh im going to have to fix it one more time.....=)
@master9815911 жыл бұрын
Wow if only ran for like 10 seconds wow
@williek180210 жыл бұрын
lol
@ronniezzzz10 жыл бұрын
oops
@josephmaughan16356 жыл бұрын
Had great hopes in enjoying your success ...........until you let the smoke out.....