Putting the Turbo in Turbo Stang: Enough Boost To Produce 900+ HP - Horsepower S12, E19

  Рет қаралды 149,813

POWERNATION

POWERNATION

Күн бұрын

Пікірлер
@stever41g
@stever41g 4 жыл бұрын
Look forward to the next episode. Can't believe that turbo/engine setup is going to fit in that Mustang.
@christopherhamilton4373
@christopherhamilton4373 4 жыл бұрын
I’ve seen bigger, especially the twin turbo setups
@tylerc7336
@tylerc7336 4 жыл бұрын
You know these are old episodes from years ago they arnt new you can find the next episode elsewhere instead of waiting for them to post it
@christopherhamilton4373
@christopherhamilton4373 4 жыл бұрын
@@tylerc7336 yessir i used to love this show back in the day, wasn’t it Saturday or Sunday mornings?
@stever41g
@stever41g 4 жыл бұрын
@@tylerc7336 Good point. Thx
@tylerc7336
@tylerc7336 4 жыл бұрын
@@christopherhamilton4373 yeah they still have them but the ones they post on KZbin are usually old
@OehlJim
@OehlJim 4 жыл бұрын
Can't wait to see what Transmission you'll run behind it!
@Hyprmtr
@Hyprmtr 4 жыл бұрын
4L60E
@markbulva4188
@markbulva4188 4 жыл бұрын
@@Hyprmtr 🤣🤣🤣
@groundshakersociety6637
@groundshakersociety6637 4 жыл бұрын
@@Hyprmtr oh God no
@Hyprmtr
@Hyprmtr 4 жыл бұрын
@@groundshakersociety6637 lol
@sidneysanders5726
@sidneysanders5726 2 жыл бұрын
I'd run a powerglide behind it, it's about the only thing GM I'd run on a ford, well that and the HEI distributor
@woodgrain18
@woodgrain18 4 жыл бұрын
Man I miss the orsca days Huntsville is my home track and back in 2005/2006 i was 15 or 16 and got to run the 7.0 index class twice with my pawpaws 81 small tire sbc Camaro that he put me in when i was 14. Orsca was just a badass organization I got to watch Tim Lynch set the outlaw 10.5 record while carrying the front tires the whole pass it was awesome. I believe 2006 or 2007 is when orsca died. I loved it, watching outlaw 10.5 cars back then is what really got me into heads up racing and boost up until 2007 I was a nitrous guy we had two plates stacked under the carburetor on the 406 in that old Camaro it was a nice car and actually pretty fast for a nitrous small block """street"""" car on 28×10.5s it went 5.70's pretty consistently. I started grudge racing in September 2006 a month before my 16th birthday and in June 2007 we was at a shitty track I'd never been to in Georgia racing a guy for 1500 bucks and we where both all over the place but right after the 330 i was out of the groove close to the center line and the other guy was to but i wasnt paying attention to him i was trying my damndest to drive the car and stay out front his front bumper was around my back tires it was a good race but he ended up crossing and hitting me and I spun around fast and went head on into the wall in the left lane at 400 foot then bounced off and went around again and the rear end of the car hit wall and stopped it totaled the car... Whats bull shit is the guy I was running was in a foxbody and all he had to do was replace a wheel fender front bumper and hood but I totaled a car that meant the world to me, I did learn alot from that wreck one thing bein a couple thousand dollars aint worth being a hero trying win riskin your health, car and the other person's cars before then I didn't lift unless it was spinning or the back bumper started getting to close to the ground lol
@AG-rk5hj
@AG-rk5hj 4 жыл бұрын
That’s cool and all but where’s the 300 inline 6 build?
@T0YCHEST
@T0YCHEST 4 жыл бұрын
Fr
@johnpatillo5203
@johnpatillo5203 2 жыл бұрын
Very nice glad to see some blue ovals
@jmitchell513
@jmitchell513 4 жыл бұрын
Man what a throwback! I remember going to the World Street Finals in St Louis back in 2007.. Tim Lynch was running 6.40s in the 1/4 then. It was a 437 Windsor with twin 88s..
@BobbyOfEarth
@BobbyOfEarth 3 жыл бұрын
..with the wheels up crossing the line.
@dawhike
@dawhike 4 жыл бұрын
Awesome Work, Guys!
@FortyTwoAnswerToEverything
@FortyTwoAnswerToEverything 4 жыл бұрын
Just in time for Saturday brunch & coffee!
@TickleFingers
@TickleFingers 4 жыл бұрын
I think "small increments" is a loose term in that there dyno cell...... 🤣🤦🏻‍♂️
@AndyFromm
@AndyFromm 4 жыл бұрын
Finally something good
@chrisduncan2626
@chrisduncan2626 4 жыл бұрын
My dream build 🤘😎
@RetroCheater81
@RetroCheater81 4 жыл бұрын
Take a drink everytime Mike says “Now”
@jacksspeedperformance7641
@jacksspeedperformance7641 4 жыл бұрын
Loving it guys
@jimmymccormick142
@jimmymccormick142 Жыл бұрын
Great build Ford power forever baby
@ThePaulv12
@ThePaulv12 4 жыл бұрын
Can also run a melonized gear on a roller cam. It's compatible with everything and doesn't wear like the other types however the downside is if you swap the gear to different distributors in your collection it gets very easy to forget which one has it on. So after forgetting which of my dizzys has the melonized gear on, I now use bronze lol.
@thejunkmanlives
@thejunkmanlives 4 жыл бұрын
honestly, more interested in that ford inline 6 they posted.
@RossHooge
@RossHooge 4 жыл бұрын
Almost blows a coupler off the charge pipe at 7:15 lol
@yuriborg8023
@yuriborg8023 2 жыл бұрын
Man o war block is awesome
@jimhiscott2918
@jimhiscott2918 4 жыл бұрын
Just think what they could do if they ran a motec. I have no clue why they are not running e85???? No boost controller? And why are they running such low compression??
@kingtriplebbb5347
@kingtriplebbb5347 4 жыл бұрын
Great, Magnificent Guys Wooooo 👍👍👍👍👍👍👍👍👍Yaaaaaaaaaa Luv it, Luv it, wish I there 🙋‍♂️😷, stay safe 🙏
@wsfwsf1497
@wsfwsf1497 4 жыл бұрын
How do you fit all that plumbing underneath the hood, unless it's a truck?
@bigredracer7848
@bigredracer7848 4 жыл бұрын
11👍's up horsepower shop thanks again for taking us all along with you for the great show
@tomnekuda3818
@tomnekuda3818 4 жыл бұрын
Enjoyed the whole upload. Was surprised with the power the small-block made, but lots of dollars for a po' boy like me. The racing in Georgia was great......want a strong engine? Get a "hillbilly motor" from the Southern U.S.......their pappy's and granddads were building fast motors to get the white lightning out of the mountains ahead of the Feds and these ol' boys have it in their genetics.
@johnsteele7989
@johnsteele7989 3 жыл бұрын
Where did you get the hot side cross over pipe?
@peter2213
@peter2213 3 жыл бұрын
“Putting a turbo in a turbo stang” Well god damn I didn’t see that one coming
@budddove6480
@budddove6480 2 жыл бұрын
Crank case vent seemed pretty lively
@briansshop
@briansshop 4 жыл бұрын
What was the boost on the pump gas pulls?
@jamey-kd6oz
@jamey-kd6oz 4 жыл бұрын
this is definitely old ORSCA racing series is long gone
@c0wb0yTV
@c0wb0yTV 4 жыл бұрын
its at least 15 years old
@markbulva4188
@markbulva4188 4 жыл бұрын
So what’s the motor dimensions? Bore n stroke?
@claytonbourne8967
@claytonbourne8967 4 жыл бұрын
Didn't you guys have a compound turbo duramax on the dyno that blew the boots off at 80 psi? It was supposed to go into a mud slinger. I thought it had like 1200hp?
@504carl
@504carl 4 жыл бұрын
I have a question, Do you only work on Ford and Chevrolets?
@Raccoonactual
@Raccoonactual 4 жыл бұрын
They do have some Mopar builds, but they're rare. Some of the old Mopar stuff is limited on parts selection, so you run out of combination content really quick with those engines.
@Sir.VicsMasher
@Sir.VicsMasher 4 жыл бұрын
They should re-visit this long block but do a proper 2020 spec twin turbo kit. They just have to find a company willing to pick up the tab like Hellion did.
@SARJENT.
@SARJENT. 4 жыл бұрын
The header primaries and collectors seem small?
@pauld2672
@pauld2672 4 жыл бұрын
I just wish they would use a fan on the intercooler so that it could perform at it's best.
@kenikenni6362
@kenikenni6362 4 жыл бұрын
There's a fan. You can see it @7:24 and @9:07.
@LMSILVIA
@LMSILVIA 4 жыл бұрын
Y2K turbo?? haha this ad is from like 2005
@0Heeroyuy01
@0Heeroyuy01 4 жыл бұрын
would have been better if it was from 2000 XD
@blikadoodolemite4125
@blikadoodolemite4125 4 жыл бұрын
what kinda transmission for that kinda hp and torque?
@austindoud273
@austindoud273 4 жыл бұрын
Built
@Parents_of_Twins
@Parents_of_Twins 4 жыл бұрын
It would have been nice to see a NA run before adding boost. Never did say what how much boost they were running.
@Parents_of_Twins
@Parents_of_Twins 2 жыл бұрын
@@bigboreracing356 Have a wonderful day
@Parents_of_Twins
@Parents_of_Twins 2 жыл бұрын
@@bigboreracing356 Thanks
@venijalamelami6287
@venijalamelami6287 4 жыл бұрын
Hell yeah 💪
@evandawkins4805
@evandawkins4805 4 жыл бұрын
God damn I got in early this time 🤣🤣🤣
@yehia2025
@yehia2025 4 жыл бұрын
George's just george's and awesome 😍😍😍🥺
@BamBamMotorsports
@BamBamMotorsports 4 жыл бұрын
So I have to ask, are these new episodes or are they uploading the old stuff?
@austindoud273
@austindoud273 4 жыл бұрын
Some of its newer some of its older
@alexshill9607
@alexshill9607 4 жыл бұрын
This is 2008 😂
@billysanders5705
@billysanders5705 4 жыл бұрын
Ceramic bearings turbo sounds like Super Dutys sounds like trouble.
@chrisarnold769
@chrisarnold769 Жыл бұрын
26* timing on pump gas? Hope they weren't running much boost at that point.
@MrBlackbutang
@MrBlackbutang 4 жыл бұрын
Where is that Beauty now ? Thanks
@a2cryss
@a2cryss 4 жыл бұрын
4:59 "You don't have anything to spin the oil pump. You lose oil pressure and the motor gets destroyed." Wouldn't you also lose ignition and the motor would just turn off?
@crazymower4343
@crazymower4343 4 жыл бұрын
some engines do and dont depends on how the gear was mounted to the shaft and how the oil pump was connected
@thephranc
@thephranc 4 жыл бұрын
Joe!
@thehemiolds455
@thehemiolds455 4 жыл бұрын
It would be minimum damage if distributor gear goes it’s not just driving the oil pump unless it’s a new motor
@Spad68
@Spad68 4 жыл бұрын
8.5 to 1 . That's so 90's . Come one guy's. You need to push it to atleast 10 or 10.5 to 1 .
@BobbyB910
@BobbyB910 4 жыл бұрын
All those silicone couplers need to be changed to Zeus clamps or vband gonna be lookin dumb when you blow a coupler at high boost
@AJ1990.
@AJ1990. 4 жыл бұрын
Does anyone know whatever happened to ol Joe on here?
@ja5435
@ja5435 4 жыл бұрын
Dam it looked like Steve fast was a teenager
@tomhamilton9140
@tomhamilton9140 4 жыл бұрын
Sad to see the red mustang with a bbc. Thank you for the SB ford build.
@styrelsefksu4463
@styrelsefksu4463 4 жыл бұрын
Great show As a suggestion for a future build i would suggest the Ford v4 engine found in the Saab Sonett and Saab 96 it was also found in the Ford Taunus 15m and 17m and some industrial applications and was the original engine meant to be used in the Ford Mustang the engine original put out between 65 (1496cc) and 72 horses 1700cc Saab managed to put out between 160 to 180 hp by boring it to 1815cc and adding dual weber 45 among other things for their rally cars back in the 1970s Some people have managed to put out about 200 hp out of it with turbo back in the day I wounder what you guys could do with that great little engine today with modern parts that wasn't available back in the 1970s thanks in advance
@kingtriplebbb5347
@kingtriplebbb5347 4 жыл бұрын
So , having turbo more powerful than a Supercharged double barrel carburetor 🤷‍♂️ Mopar, or the same ??or it doesn't matter 🤷‍♂️, or less maintenance or what type of space your vehicle has or could Ya'll do a comparison Video on that legally without stepping on somebody 's toes or any type of Manufacturer copyright infringements Patons royalties, 🤷‍♂️,whatever some of us out here want the most for the money 💰, want 2 run and Win some races. Ya'll know what I mean 🏁, thanks for sharing Great Show 👍👍🙋‍♂️stay safe 🙏
@Rampant_Colt
@Rampant_Colt 4 жыл бұрын
Joe Elmore @ 10:42 and 14:48 I would like to buy a t-shirt like that, but cannot find it on the Powernation website. Where may I obtain one?
@puttingwarheadsonforeheads9872
@puttingwarheadsonforeheads9872 4 жыл бұрын
I want one😂
@mindblone0
@mindblone0 4 жыл бұрын
Show me the build sheet......
@remoc52357
@remoc52357 4 жыл бұрын
Sorry guys.......if you ain't running 1/4 mile.....you ain't shit.......bring it to a real drag strip........I'll be there waiting to take yo money!!!!!!!!!!
@mmjnice97
@mmjnice97 3 жыл бұрын
Those value cover😬🤒 🤢🤮🥴🤢😷 my bad yucky 🤮 Now with that said... everthing else from a gearhead that doesn't turn many wrenches but knows how it all works.. seem perfect 🥰
@superkillr
@superkillr 4 жыл бұрын
Why would you advance the timing on the computer and the distributor? Come on guys.
@thatmarred_mustang
@thatmarred_mustang 4 жыл бұрын
They made more power didn't they?
@racerx2580
@racerx2580 4 жыл бұрын
lol. I'm sure they know a whole helluva lot more than your armchair mechanic wanna be ass.
@iankerr1549
@iankerr1549 4 жыл бұрын
Yee yee
@Dakktyrel
@Dakktyrel 4 жыл бұрын
That's a little over 700 and change at the wheels....nnnnice.
@dayofleo8550
@dayofleo8550 4 жыл бұрын
You wrong.
@Dakktyrel
@Dakktyrel 4 жыл бұрын
@@dayofleo8550 Was I too high or too low? I 've always heard there's about a 15-25% parasitic loss from the drive train.
@dayofleo8550
@dayofleo8550 4 жыл бұрын
@@Dakktyrel low. It’s about 850-915
@basshead.
@basshead. 4 жыл бұрын
93 octane + auto trans = 790-820whp
@basshead.
@basshead. 4 жыл бұрын
@@Dakktyrel 25% loss = AWD + auto trans
@toddolsen5421
@toddolsen5421 4 жыл бұрын
looks like this was made in the early 2000s
@alexshill9607
@alexshill9607 4 жыл бұрын
2008 lol
@earlmason3168
@earlmason3168 4 жыл бұрын
It's not a motor but an engine
@Spad68
@Spad68 4 жыл бұрын
Omg . I sure the ending Stevie mustang . This is an older video. Lol
@lashlarue7924
@lashlarue7924 2 жыл бұрын
man wtf these youngsters keep dogging on old Joe. And he ain't even that old, unless he's actually like 80 and only looks 55. Sheesh. Y'all damn kids settle down. Leave Joe Elmore alone, he's doing fine.
@gokartmadness3047
@gokartmadness3047 4 жыл бұрын
Is that a 302
@forddodge6994
@forddodge6994 4 жыл бұрын
Probably stroked 351
@chrisduncan2626
@chrisduncan2626 4 жыл бұрын
4.030 bore 9.5 deck, not stroked. Its in the bottom of the long description
@413x398
@413x398 4 жыл бұрын
@@chrisduncan2626 They said it's 382 inches. I would call that a stroker.
@chrisduncan2626
@chrisduncan2626 4 жыл бұрын
@@413x398 mustve missed that part my bad. I read the description and it said a 290hp 350ci crate motor
@413x398
@413x398 4 жыл бұрын
@@chrisduncan2626 That was the Chevy crate engine lineup they had later in the vid. At 382 inches, you are essentially looking at a quarter-inch stroke increase to 3.75" on a Windsor, plus the overbore.
@aaronburratwood.6957
@aaronburratwood.6957 4 жыл бұрын
I’m a Ford guy 100% but that’s a lot of work when you can just take a stock junkyard LS, throw on a turbo and make that 900+ hp for fairly cheap.
@aaronburratwood.6957
@aaronburratwood.6957 4 жыл бұрын
When you blow an LS you just make another trip to the junkyard NOT the machine shop. Really great built here though for sure. Boost makes HP.
@Hyprmtr
@Hyprmtr 4 жыл бұрын
I only came to the comments to post this too.
@bigredracer7848
@bigredracer7848 4 жыл бұрын
Composite gears snap to teeth off they're not worth using
@manitoublack
@manitoublack 4 жыл бұрын
Looks like, "high Performance Controls" are no longer in business :(
@backwoodsshiner887
@backwoodsshiner887 4 жыл бұрын
I can’t believe your putting a turbo in a turbo mustang that’s almost unheard of 🤦🏻‍♂️
@aye6310
@aye6310 4 жыл бұрын
Putting xyulo
@MrBlackbutang
@MrBlackbutang 2 жыл бұрын
Where’s Joe ? Not in the White House
@Stevexnycautomotive
@Stevexnycautomotive 4 жыл бұрын
Wow.. She getting hair blowers.. What's next? Lip stick like no bumpers.
@raymondforsythe8676
@raymondforsythe8676 4 жыл бұрын
It’s not a motor, it’s an engine. Motors are electric.
@twistershift
@twistershift 4 жыл бұрын
Motor: Noun 2: any of various power units that develop energy or impart motion: such as a: a small compact engine b: INTERNAL COMBUSTION ENGINE especially : a gasoline engine c: a rotating machine that transforms electrical energy into mechanical energy
@numinous4789
@numinous4789 4 жыл бұрын
@@twistershift Raymond is technically correct, but it's still pendanticism. He seems like the kind of guy who uses phrases like "Well, actually..." then essentially argues semantics because he thinks he can come off as knowing more than others and thereby try to counteract his sense of inferiority.
@Nmdixon-cu7vm
@Nmdixon-cu7vm 4 жыл бұрын
Numinous you just defined all of reddit. Lol.
@numinous4789
@numinous4789 4 жыл бұрын
@@Nmdixon-cu7vm LOL!
@kirstysinclair9021
@kirstysinclair9021 4 жыл бұрын
Just use a Holley terminator and individual coils and a wideband wouldn’t hurt . Use a proper Mac valve for the boost control . You’ve built a quasi efi with all the problems of a distributor . What a mess.
@bmstylee
@bmstylee 4 жыл бұрын
Remember when this was recorded efi was less accessible and more expensive. Holley efi wasn't a thing yet.
@LMSILVIA
@LMSILVIA 4 жыл бұрын
Yeah, the turbonetics Y2K is a giveaway this video is from the early 2000's
@davenelson1571
@davenelson1571 4 жыл бұрын
Amish Mike's selling engines now? I suppose its a step up from his last job has a carpet salesman
@johnmirbach2338
@johnmirbach2338 4 жыл бұрын
😁✌🖖👌👍😎
@czarekaj1098
@czarekaj1098 4 жыл бұрын
Index racing, go fast and then stand on the brakes, yeah right, What? They practice for being pulled over by the cops?
@twistershift
@twistershift 4 жыл бұрын
Racing against an opponent, and racing against the clock? Sounds fun, I'm not sure why you aren't understanding this. Sounds like it would be even more of a challenge in quarter mile runs.
@czarekaj1098
@czarekaj1098 4 жыл бұрын
@@twistershift Yes. you are right. It would be a challenge to watch it.
@lluciferl9276
@lluciferl9276 4 жыл бұрын
Basic boring power🤣
@caleblundy4804
@caleblundy4804 4 жыл бұрын
👌👌😎
@Unique1Media
@Unique1Media 4 жыл бұрын
Can you all build same type / direction you did 1St half of video for 2005 Dodge Manum 5.7L Hemi??? My Facebook page is: Unique1 Mainly for SHOW but still
@TheCheapReefer
@TheCheapReefer 4 жыл бұрын
lower octane more boost wtf race gas
@dewightkey6975
@dewightkey6975 2 жыл бұрын
To bad he not good enough to put a ford in a ford then he would have real winner l.d.k
@EricJh21690
@EricJh21690 2 жыл бұрын
14:02 for the sake of all white people please never do this again 🙈
@twilliams8041
@twilliams8041 4 жыл бұрын
My wife watches this show. Not sure why, as it's clearly a mans show. No woman on the show. Actually I've found woman who hang around automotive shops are usually quite loose.
@MichaelResznekiTrolling4Truth
@MichaelResznekiTrolling4Truth 4 жыл бұрын
Just passing along some info. There are 3000+ Architects and Engineers calling for a new investigations in 9/11
@dynamicgameplay1825
@dynamicgameplay1825 4 жыл бұрын
@Lassi Kinnunen What about building 7?
@MichaelResznekiTrolling4Truth
@MichaelResznekiTrolling4Truth 4 жыл бұрын
@Lassi Kinnunen hey there you pathetic sock account ;)
@xhoopla6893
@xhoopla6893 4 жыл бұрын
Ur accNt name m8.
@MichaelResznekiTrolling4Truth
@MichaelResznekiTrolling4Truth 4 жыл бұрын
@@xhoopla6893 it is my real name and I added the slogan "trolling4truth". I've been spreading 9\11 truth for years.
@MichaelResznekiTrolling4Truth
@MichaelResznekiTrolling4Truth 4 жыл бұрын
@5252rpm I have never followed "Q". AE911truth has been around a lot longer then that controlled opposition group. You probably know a lot more about "Q" then me... Stop being ignorant
@dantinkes3073
@dantinkes3073 3 жыл бұрын
I'm guessing this project died never to be seen again. Typical
@johnsteele7989
@johnsteele7989 3 жыл бұрын
Where did you get the hot side cross over pipe?
Race Ready Roll Cage for the Turbo Stang - Horsepower S12, E20
17:54
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
50 cordless drills made into an engine for a car
9:39
Garage 54
Рет қаралды 103 М.
Old School 302 Ford Goes High Tech - Engine Power S8, E9
21:36
POWERNATION
Рет қаралды 612 М.
Unleashing a Boosted 347 Small Block Ford - Engine Power S2, E20
18:42
Firing Up our 1,000 HP Turbostang Foxbody - Horsepower S13, E3
17:37
Junkyard Ford 390 FE Teardown and Rebuild - Engine Power S7, E8
21:39
Rebuilding a 4.0L Jeep Straight Six to 242HP - Engine Power S2, E14
18:43
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН