Hands down you're videos are the most informative. Your chsnnel is the best minibike channel on KZbin
@chrisbritton43464 жыл бұрын
Learned a lot from this vid. I only repair small engines and this taught me a lot about revuils, thank you.
@meco721045 жыл бұрын
You make it look so easy.
@Pilotforlife5552 ай бұрын
I’ve been wanting to do a complete build but I’ve been super nervous about screwing it up. This video gives me the drive to just send it. Thanks man!
@Cereal_KillrАй бұрын
Its nor nearly as hard as youd think. I pulled My Tilly 212 out the box and tore it right open and went stage 2 lol. It's a beast now today as I've learned so much more since then too.
@Fentertainment5 жыл бұрын
You didnt waste my time, Your video & audio is clean and crisp, I Appreciate your Tutorials! I believe I said this not to long ago. Thanks Again Greg, - Ryan
@MrHotwheels19795 жыл бұрын
“Dip the bolts in some ool “ lol
@Kettenhund753 жыл бұрын
...? OOHHH... you're not used to speaking southern. Bless your heart.
@chrisflores83623 жыл бұрын
@@Kettenhund75 hahaha I know that one 😂😂
@trevinskiking21653 жыл бұрын
Better than "Goop"...Trev New Zealand
@goldenchild58942 жыл бұрын
@@Kettenhund75 Its erl🤣
@HASHBAR710 Жыл бұрын
@@Kettenhund75No one is lmao
@koreywilliams45703 жыл бұрын
I just ordered the stuff to finish my stage 2 setup and I added the billet side cover because its badass looking and it just happens to have a way better oil drain plug than the stock ones for my setup.
@franksdg1253 жыл бұрын
RBG awesome content and the instructions are very clear. It makes me want to build one. I build chevy v-8s and when I do head studs arp reccomends not tightening the studs all the way down. Use oil on the under the head of the fastener to help with proper torque also.
@cozycastle Жыл бұрын
The detail in your parts list is amazing. Thanks for jumpstarting this for me 👍🏻👍🏻
@stonerman152 жыл бұрын
This channel is so helpful. Thanks for making these videos and showing everything.
@samsgarage17163 жыл бұрын
I’m building this same exact engine right now and this video is really helpful.
@lane3192 Жыл бұрын
Love the leg lamp in the background! It looks like a "major award".
@-DEATHSTROKE2 жыл бұрын
This is what the new hotrod cart needs but with a supercharger 😎
@turdferguson10215 жыл бұрын
The G in RBG is now loose. Need to turn it clockwise.......
@michaeljbaker34925 жыл бұрын
Like the valve cover and the blue bolts. Great step by step video!
@gabeyoung6452 Жыл бұрын
What a majestic beard
@obiwan10625 жыл бұрын
Love those engine build videos, nice job brother.
@jeanlawson91332 жыл бұрын
Dude your videos are truly Ace's , information is awesome.
@RedBeardsGarage2 жыл бұрын
I appreciate that!
@samsgarage17165 жыл бұрын
I just bought a hemi 212 and I put it on a little razor dune buggy and it looks like a death trap lol.Nice job Red beard
@jimbo96hitr5 жыл бұрын
Looks like a beast!!! Awesome build
@ericmcginnis94133 жыл бұрын
It would be awesome if you built then tested on a dyno! Be sweet if u had one!
@bubbzification5 жыл бұрын
Bubbz and the TARDSQUAD was here🤘🏻😎🤘🏻 God bless brother
@carvis3283 жыл бұрын
I have almost the same build. I’m having issues with my carb flooding the intake tube with fuel. Would be nice to see you do a mikuni tuning video.
@musicaquellegaaalma-cc6kqАй бұрын
nice video intruction god bless you
@themonkey59895 жыл бұрын
would love to see you do a performance build on a duromax 7hp electric start
@larryhartmeister34105 жыл бұрын
I think a video on installing a electric start on a212 hemi with Honda pts. would be nice for people with mudmoters. Mine is hard to pull start because of the upgrades.
@LoveconQuersall739 ай бұрын
You need to do a 212 with AMR 300 supercharger on the dino
@Leveluplivin9 ай бұрын
15:30 this the part that I’m worried about 😮
@2259alfie3 жыл бұрын
Great videos and Go-Kart & Mini Bike builds . On a Predator 212 with a Stage 2 or 3 can I still run a torque converter ?
@Jalen_Knight8526 Жыл бұрын
Yes you can but it is recommended to get one that is rated for the horsepower your engine is going to produce under the Stage 2 or 3 kit.
@HaveUSeenMyBaseball86 Жыл бұрын
Need a Predator Ghost Billet everything video. Please. And whats the best motor 224cc or Ghost motors to start a build with? If i was to buy all the billet upgrades and more upgrades eventually.
@sagenbabin8786 Жыл бұрын
The fact that first of all it’s a 20hp fully built lawnmower engine but second of all There’s still room for improvement Such as hydrolic roller lifters instead of the stock flat tappet ones
@46878784 жыл бұрын
How bout a kickstart install on the predator 212cc,...I haven't seen one on a mini bike since the 70's !!!
@ryan14r954 жыл бұрын
SilkySlim you can’t because the kick start is opposite of the way the motor spins... you would have to kick it forwards. Akward
@joelboley23445 жыл бұрын
What will you do with all the leftover new parts??? Sell them?
@SundownU12s Жыл бұрын
Ride cymbal going hard
@silentdeath92375 жыл бұрын
You should do a electronic ignition modification using a magnetic pickup and a GM HEI ignition module and then a powerful ignition coil
@Floridawaves7037 ай бұрын
Great vid
@elesjuan5 жыл бұрын
Thanks Papa Redbeard!
@user-zx2cd5jm5f11 ай бұрын
I built this exact step up every part you used and I keep blowing belts it completely destroyed my sprocket. What’s the next step on clutches that will actually handle the power and so I can actually enjoy this badass motor
@jhmac5484 ай бұрын
How are holding the crank from turning when installing flywheel nut to 65 ft lbs!
@ChristopherJones163 жыл бұрын
04:02 are those the Lifters? I was wondering what those things were called.
@levilyons43575 жыл бұрын
Nice wish I had a motor like that
@silentdeath92375 жыл бұрын
If they make a modified side cover they should add a oil pump and a drilled crankshaft for pleasure lubrication modification.
@vicguide45802 жыл бұрын
Super helpful thanks
@theone94755 жыл бұрын
looks like the same video as the stage 4 predator build earlier this week
@henrycabrera84042 жыл бұрын
Hello I'm Filipino and I'm always looking for your videos,hopping that can I buy a billet crank for my 18hp.
@vinnyaudi9123 ай бұрын
At the 16:00 mark the valve keepers seem to be misaligned. One is i. The grooves and 1 is not. Was this corrected before the engine was ran?
@cletus97962 жыл бұрын
Great job
@SKYENET-zy2cn5 жыл бұрын
Red why don’t you ever port out the heads a bit?
@Indiancreekgunsmithing5 жыл бұрын
I'm guessing it's so go power sports can demonstrate how much power can be "bolted on"
@gastongregory11674 жыл бұрын
@@Indiancreekgunsmithing The new predator heads ( both hemi & non ) come with huge ports compared to clones.
@trevinskiking21653 жыл бұрын
@@gastongregory1167 Gaston, a Clone of a Clone ?. Now I've got it .Thanks.Trev New Zealand
@aaronyoung81323 жыл бұрын
@@trevinskiking2165 they are all clones of a honda gx200 most clones are made with lower tolerence standards. The preditors are pretty good compaired to most clones there are alot of diferences tho between them all
@trevinskiking21653 жыл бұрын
@@aaronyoung8132 Aaron I knew all that but thanks for stating it for others less knowledgeable.
@gmcinnis63042 жыл бұрын
attaboy!!!
@vaoutdoorssportsman35555 жыл бұрын
Way better music this time!
@knifeforgersharp39902 ай бұрын
I’ve heard you need to get a specific flywheel for the hemi, could I use a non hemi flywheel?
@hunterfutrell79643 жыл бұрын
Great video
@kevinmulwee3148 Жыл бұрын
Have you done anything on a ghost motor yet?
@HoardFarmsАй бұрын
What's the difference between stage 2 and stage 3
@waynecreech5 жыл бұрын
nice work!
@sajedeid39035 жыл бұрын
When will you do the stroker build??
@davidt4156 Жыл бұрын
If anyone can answer this. He’s putting new camshaft why not crank shaft
@HaveUSeenMyBaseball86 Жыл бұрын
What brand of table are you using?. I want one of those. The metal coated table.
@cameronsawesomechannel9083 Жыл бұрын
Where did you get that magnetic dip stick from
@tahangthoha21642 жыл бұрын
Good
@joshuapheasant25105 жыл бұрын
Can you please do a review on the coleman 125DX dirt bike
@LuchMobGarage5 жыл бұрын
Smash the dern like button you RAWK Red Beard
@predator_boiz336 Жыл бұрын
Don’t you have to grind something on the crank of the hemi?
@ashtonpauley13822 ай бұрын
Is there no performance hemie piston head?
@kellyrenzi95603 жыл бұрын
U r AWESOME!!!
@Mroswaldo165 ай бұрын
So thats a stage 3? Im ported is that a stage 3.5? Since 4 is bigg valve/cut?
@samuelreams76705 жыл бұрын
Does the arc hemi flywheel have magnets on inside of flywheel to be able to add charging coils for a headlight?
@jacobneymeiyer90912 жыл бұрын
No. If you want charging you should go with the Tilliotson e start. Their flywheels have much higher rpm range than stock predators
@Firebird_8765 жыл бұрын
First one to view and comment. You make the best engine build videos on KZbin!!
@marcusgreen51167 ай бұрын
I got same motor what all you put in it I want this same build
@viceanime7685 Жыл бұрын
where do you get that cool hardware from
@user-mg9ne2nf9c2 ай бұрын
What is the lift on that camshaft?
@UrMom-me7mp2 жыл бұрын
I can never get the valve lash set right. Can you do a more in depth tutorial about it
@themagneticheartradioshow93725 жыл бұрын
Hey RBG why do you dip the bolts for the rod in oil before you put them back in?
@theone94755 жыл бұрын
so u get consistent torque of the bolts inside an engine
@themagneticheartradioshow93725 жыл бұрын
Oh ok thx just wondering
@MrMattydavee5 жыл бұрын
Jeremy Dubs I guess that makes since. But more then one time I've cracked the rod. Then discovered it was hydraulic pressure from an old head. If it's clean you will always get consistent torque.
@marcmo71385 жыл бұрын
I wouldn't suggest putting oil in the hole if it is a blind hole. Doing so will cause a hydraulic lock and snap the rod bolt or pull the threads on the aluminum rod.
@marcmo71385 жыл бұрын
@@MrMattydavee Sorry Mattydavee I didn't read your comment before I chimed in. But you are correct.
@tateross35792 жыл бұрын
Will it hurt the lobes on the cam because of the heavier valve springs
@Canadian_Craftsman4 жыл бұрын
RedBeardsGarage, where is that pull start handle from??? Cant find it REALLLY like it lol..
@RedBeardsGarage4 жыл бұрын
It is a rc pull start from ebay
@Canadian_Craftsman4 жыл бұрын
@@RedBeardsGarage thanks for the speedy response brother
@duanewhite31844 жыл бұрын
I didn't have an oil sensor in mind so I didn't need to do thatplus for my Governor whole I tapped it half away and used 1/4 inch allen wrench head plug in red loctite
@Kettenhund753 жыл бұрын
$997+tax for all listed parts with engine. Stage 3 is listed most places @ 16-20hp. Brand spankin new 670cc predator is 22hp for $829.
@Kettenhund752 жыл бұрын
@Kevin kzbin.info/www/bejne/Zpawg2ppmpqFmJI
@redpot66845 жыл бұрын
Break in please!!!! 🤩
@Appalachian_Enduro Жыл бұрын
If i did this complete build for my mi i bike that i love will it still be long lasting
@Appalachian_Enduro Жыл бұрын
Should i ?
@danathomas18275 жыл бұрын
May I share some tech info with you the next time you remove a flywheel rotate the flywheel so you have access to the counterbalance use your pry bars the normal way but instead of hitting the crankshaft strike the flywheel on the Outer Edge at the counterbalance with the hammer it comes loose every time
@hallcharlie745 жыл бұрын
Right? I have seen so many videos of hammering the crankshaft. Like they have never heard of crank walk.
@davenone-ya4825 Жыл бұрын
I’m curious as to why you kept the stock piston?
@lindad.84125 жыл бұрын
How did you keep the Crank from spinning when you installed the billet flywheel?????
@trevinskiking21653 жыл бұрын
Linda, he used a common crankshaft key - fits in the crank groove & Flywheel keyway slot - Trev New Zealand PS & you can buy offset crank keys upto 8' crank degrees advanced which is 16' degrees ignition.Ask at you local speed Shop or try Isky Cams.T
@joshwillardturtleman123545 жыл бұрын
Red beardddddd
@theone94755 жыл бұрын
the engine teardown at the beginning had the arrow on the piston pointing up? did Braxton assemble it?
@lilghetto2796 Жыл бұрын
What motor is being rebuilt?
@oniefields832 жыл бұрын
Do you think the hemi is better or non hemi? I’ve see. We’re you have coil bind and valve Clarence problem but didn’t look like you had a problem here
@brandoncoffyn80242 жыл бұрын
Is this the same for a non hemi
@mrbrown34623 жыл бұрын
Seems you know these predator 212s could you tell me where they suck oil from when rolled over or thrown in a real hard corner. I have a go kart that had a tehcumseh on it and you could roll that thing all day and throw it in a high bank corner in our sand pit and never had an issue I backed into one day and broke the carb off it and I bought a new predator 212 for it and any time you roll it or throw it in a hard corner the thing turns into a fogger for a few seconds or so, it disappears in the smoke.
@wescryer55035 жыл бұрын
Do you have a link for the valve spring compressor? I put the ss valve kit and 26lb springs on my hemi last weekend. I got it done but it was really difficult, the spring compressor I had was too big.
@jemessoncordeirodasilca16875 жыл бұрын
Top de projeto mano 👍👍
@spencerjohnson14996 ай бұрын
What did this cost you in total to build this 212 hemi
@dominicpaez7601 Жыл бұрын
What tool do you use 2 hold down the rod when yu. Check for clearance ?
@tilvalhalla93433 жыл бұрын
You never shown how you held the fly wheel in place
@jacobneymeiyer90912 жыл бұрын
He made a bracket that bolts onto the side cover and holds the output shaft in place. Omb warehouse sells them I believe
@RccarsUK5 жыл бұрын
That's sweet as...
@MustafaKingHutchinson2 жыл бұрын
what upgrade of ignition coil is this?
@AYVABTU0015 жыл бұрын
Soooo I was wondering why you guys haven't been posting. Searched your channel and somehow I'm no longer subbed. I dont know how that happened but just a heads up if your views and sub counts are down.
@caluzzucarrazzi55494 жыл бұрын
Hey red beard what length chromoly pushrods did you use? Looking for a set for my tillotson 212 hemi head, I believe I've found the upgraded valve train kit you put on your engine here as well so I think I'm gonna go for that too, it's the only difference between my engine and your build here, plus the fact that I'm running pvl ignition flywheel and briggs coil
@asphaltcowboy78683 жыл бұрын
Thinking of doing stainless steel vales on a non-hemi..but they say I have to ream out the Vale guide to 5.5 mm...how do I do that???
@danielhaug96733 жыл бұрын
Do u always mess with the Chinese remake of the Mikuni only because I was wondering if there any good
@adam100a85 жыл бұрын
What’s the point of a billet side cover? It doesn’t add any performance upgrades does it?