I’ve been really thinking about swapping the engine I have now for a new one and this video really helps me in making my decision now… I think I will go ahead and do it
@Random.Adventures. Жыл бұрын
great video. would be nice if you can make a vid on how to do it for 110cc frame with 212 motor but this vid does help for ideas
@joshuagerlach69432 жыл бұрын
Those are so cool. 212s been my daily driver for years before that it was flatheads. if I need to go into the city it’s 66cc
@martinrico889010 ай бұрын
Thank you for the video it was helpful 👍🏽
@Alpha-Works-Tx10 ай бұрын
Glad it helped
@KenyonWilliams-bc1ib4 ай бұрын
What size sprocket on the front & back???
@camerondamelio769727 күн бұрын
Thanku
@dj2faced3 жыл бұрын
Cool I’m gonna do mine
@juandavila16393 жыл бұрын
Okay tanks
@ashleymartinez31372 жыл бұрын
What's the teeth count on the sprocket on the red one?
@DavidMartinez-uz2vf7 ай бұрын
Do you have the link for 420 sprocket
@doinstuffwithceejay66572 жыл бұрын
Nice explanation vid thanks
@Alpha-Works-Tx2 жыл бұрын
Glad it helped
@kenbaker13533 ай бұрын
What if you get a quad that used to be driveshaft or the motor blows up and you want to do this swap? Would you still have the room to run a sprocket?
@MOE135763 жыл бұрын
I did the same thing. Video is on my other channel that I no longer have access to(lost YT password)
@anthonychancellor26138 ай бұрын
Should try to use the original tank so the seat fits right and makes it look less clusters ducked😅
@PrestonFrye Жыл бұрын
Have u considered taking the governor out or is it alr out
@Alpha-Works-Tx Жыл бұрын
Took them out on both after the video.
@Jesse-iv8tn6 ай бұрын
I know this video is old but how fast could you get these to go? I love the concept but with the torque converter and no transmission I can’t imagine they go super fast, I could be wrong though
@Alpha-Works-Tx6 ай бұрын
About 50 mph with the gov delete
@Jesse-iv8tn6 ай бұрын
@@Alpha-Works-Tx appreciate it dude, also if you got the time what would you suggest for a rear sprocket, like teeth wise
@KenyonWilliams-bc1ib5 ай бұрын
I have the predator 212 I removed the governor I have the stage 1 Amazon carb.... what else should I do to the motor
@travis8173 Жыл бұрын
So if I have a carb that doesn’t come with the engine like an atv carb do I still need to put a throttle cable on the actual spot
@Alpha-Works-Tx Жыл бұрын
If your running the predator 212 just route the cable in a way that the carb will function correctly. Everyone of these builds is different in some aspect, you can even modify the stock cable to work.
@kibamarasame5828 Жыл бұрын
So did you have a problem where it bogs out really bad? I’ve been building one and can’t quite figure it out. I’ve changed the jets and the idle idk what else to do
@Alpha-Works-Tx Жыл бұрын
Make sure your fuel lines are smooth so they are not too long or routed weird. Also check the throttle cable and make sure it doesn’t bind or hand anything in the way.
@Dat_dude_lonzo3 жыл бұрын
Should make a video of u making one
@sgsavage19092 ай бұрын
what’s the frame called of the black one?
@edwinmaling18903 жыл бұрын
How did you mount the rear sprockets to the axles? An adapter hub thing? Does the axle have a keyway? I’m trying to swap a 212 into a 86 Honda trx250 and it originally came with 520 chain and sprockets and I need to get 40/420 working so I can use a torque converter. Thanks
@Alpha-Works-Tx3 жыл бұрын
One has an aftermarket sprocket and the other I bought a blank sprocket and drilled holes to make custom fit to bolt pattern. Doing the blank and drilling cost maybe 20-30 bucks total and that is what I would recommend for your Honda.
@josephcervantes68722 жыл бұрын
Post a video on it.
@brandonwindell98742 жыл бұрын
What tires did you use? You don’t have a link for them
@Alpha-Works-Tx2 жыл бұрын
Link added
@oscarcasas1183 Жыл бұрын
Nice setups on the atv. How did you bolt down the seats on them?
@Alpha-Works-Tx Жыл бұрын
The mounts and clips for the seats are original factory ones that are on the frame.
@nixbar65462 жыл бұрын
What is that big sprocket on the rear that holds the chain, is that linked in the description?
@Alpha-Works-Tx2 жыл бұрын
That sprocket is a blank I bought from gopower and drilled to fit. It's a 420 sprocket.
@nixbar65462 жыл бұрын
@@Alpha-Works-Tx youre the 1st youtuber to actually reply fast and not in a week, thank you, I'm trying to do this with my atv because all the wires are junk and I just blew something off the engine so this would be better and faster than the Chinese engine
@Alpha-Works-Tx2 жыл бұрын
@@nixbar6546 for sure, the great thing about this swap is it eliminates all wiring which is nice.
@nixbar65462 жыл бұрын
@@Alpha-Works-Tx yep no wires is what I'm going for
@nixbar65462 жыл бұрын
@@Alpha-Works-Tx what do you have the chain hooked up to??
@PrestonFrye Жыл бұрын
i put the engine on the polaris 90 , and it only goes in reverse lol i havent done anything to it yet so what do i do
@Alpha-Works-Tx Жыл бұрын
These engines are designed to go one way only. Which way is the engine facing?
@prestonfrye2014 Жыл бұрын
To the right side
@sploofy48782 жыл бұрын
I got a 110 frame, loncin brand, would I have to weld or get a plate or could it just bolt right on, also what sprocket would be good for speed and launch
@Alpha-Works-Tx2 жыл бұрын
Either one as long as the motor will sit even and run the chain straight. For the sprocket get a blank and drill to fit for a 420 chain.
@sploofy48782 жыл бұрын
@@Alpha-Works-Tx also I have another frame but the sprocket is on the opposite side, i need it to be on the other side for the shaft to line up with it. how would i switch it
@Alpha-Works-Tx2 жыл бұрын
@@sploofy4878 in that situation you would need to run a jack shaft. There's some videos on KZbin with people that have done it.
@JosephPananyan5 ай бұрын
what chain and sprocket sizes do i need to buy for it to fit?
@Alpha-Works-Tx5 ай бұрын
Two sizes that people usually run are 420 and 428 just make sure the chain and sprocket match. These are 420 chain and sprockets.
@Tyler-vf2ge3 жыл бұрын
What mounts were used? Not sure which mounts will and wont work
@Alpha-Works-Tx3 жыл бұрын
Use a steel plate or bars and drill to fit…bolts can come from any hardware store
@Tyler-vf2ge3 жыл бұрын
@@Alpha-Works-Tx how did you make the seat go on without the body?
@Alpha-Works-Tx3 жыл бұрын
@@Tyler-vf2ge the seat doesn’t need the body only the front mount and the rear clips in.
@mattcunningham27122 жыл бұрын
What was the sprocket you bought for the black one I’m looking for one for mine it’s center whole is 1-7/16 do I need one exactly that or can I use one a little bigger and center it up and match or drill the little wholes
@Alpha-Works-Tx2 жыл бұрын
You can get a little bigger and just drill the holes to center. That's what I did
@dirtydansykes2 жыл бұрын
Can you post a link to the tires? I’m having trouble finding what I want and yours look perfect. What size are they?
@Alpha-Works-Tx2 жыл бұрын
Link added
@-Swagboywedo Жыл бұрын
What type of amount plate did u use?
@Alpha-Works-Tx Жыл бұрын
Steel motor mount plate off Amazon for one and steel bars with holes drilled for the other one. You can make what ever you need to mount the engine as long as it's solid and straight.
@kibamarasame5828 Жыл бұрын
I can’t find a sprocket for mine do you have a link ?
@Alpha-Works-Tx Жыл бұрын
Go power sports in Keller Texas can ship a blank with the amount of teeth you want. Then you can drill to fit your axle.
@stuttgurth2 жыл бұрын
Didn’t see if you posted but how quick will they go?
@Alpha-Works-Tx2 жыл бұрын
I used a GPS app on the phone and got around 37-40 mph. This was not pinned or giving it all they had either.
@DatHondaBoi223 Жыл бұрын
Did you custom make that long swingarm? Or is that a stock one? My frame has a super short wheelbase it’s a coolster 110
@Alpha-Works-Tx Жыл бұрын
The guy I bought the frame from had made it. The long wheelbase is nice and handles really well.
@juandavila16393 жыл бұрын
Can you use the same sprocket from the factory Chinese four-wheeler
@Alpha-Works-Tx3 жыл бұрын
Yes depending on the tooth count and configuration your trying to run. Keep in mind a lot of the torque converter kits are for 420 chains.
@destinyrivas1052 жыл бұрын
Can you add everything to buy directly to Amazon please
@Alpha-Works-Tx2 жыл бұрын
Hello, all the links are in the description. Is there a part missing that you need?
@destinyrivas1052 жыл бұрын
@@Alpha-Works-Tx hi sorry I just seen it I have roketa 250 atv frame I’m putt 212 predator what type of sprocket would you recommend
@destinyrivas1052 жыл бұрын
Where can I get the sprocket that would fit 250 atv ????
@Alpha-Works-Tx2 жыл бұрын
@@destinyrivas105 I would buy a blank sprocket and drill the holes to fit what you have. Measure your axle diameter so the center of the sprocket will fit. Another option is to determine what chain you already have because your stock sprocket may work already.
@Alpha-Works-Tx2 жыл бұрын
@@destinyrivas105 Also, to purchase you can look at Amazon and gopowersports.com