Predator 224 gets a 10 tooth Max torque racing clutch

Predator 224 gets a 10 tooth Max torque racing clutch
Installed a 10 tooth Max-Torque racing clutch on the Predator 224 powered Coleman cc100x minibike to see if I could get the bike into the 2-second range from zero to thirty.
Predator 224 playlist - • 24MM Flat slide carbur...
Instagram - doubledown555Black66
_________________________________________________________________
Parts used -
Max - Torque racing clutch www.gopowersports.com/max-tor...
1.2 ratio rockers - www.ebay.com/itm/185178004735...
ARC billet rod - www.arcracing.com/6773-ducar-...
60 tooth rear sprocket - www.ebay.com/itm/165278015599...
NR racing chrome Moly pushrods - www.nrracing.com/product-p/cm...
Clear valve cover - www.bmikarts.com/Clear-Valve-...
Staged header pipe - www.ebay.com/itm/175106307951
Exhaust trumpet - www.gopowersports.com/trumpet...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@kennygar]

Love the videos !!!! Are you running the wildcat 70mm piston ?

[@Black66]

Thanks! No, not in this one.

[@kennygar]

Ok cool .. so can I use the stock 224 piston with the 6773 rod

[@Deucealive75]

@@kennygar Yes. Block and cam clearancing may be needed.

[@kennygar]

Gotcha !! Ok thanks bro, keep the videos coming !!!

[@Black66]

@@kennygar Yes, you can.

[@JVScustoms]

Yesss new black66 video… it’s gonna be a good Saturday. Good stuff man, thank you

[@bradenublish3710]

couldnt agree with you more!

[@afroman123433]

I don’t know much to even true understand what you really talking about but I’m here for it love the video I did learn lol

[@Deucealive75]

That engine sounds great.

[@rockcitymarco9186]

Great video, get that little bike moving 😁

[@TheBiliken]

Love the videos! Any chance we will see the Coleman ct200u with the zip tie different rear sprocket, and stage 1 kit with the stock 196 off-road? Also do you plan to take the govenor out of it or is the zip tie ok to do long term if your trail riding? Also could you share which app you use for speed tests. Thanks again for all the tips! We will keep watching the vids.

[@Spacecruizer203]

gotta get me that 12tooth max torque asap Grrreat video too man aint nobody messin wit that bike 2.99 thats good money

[@Kejup_Raycing]

Good content Brother,Subbed.

[@Black66]

Thank you! Thanks for watching.

[@stevenalvarez3370]

I just got a 224 and put a nibbi 24m carb on and having trouble getting it to run properly could you make a video on tuning the nibbi

[@elcuh7939]

@black66 great video 👍. I have a question so I recently installed a torque converter on my Coleman ct200u ex with a modified 212 predator the thing is the torque converter engages pretty late from a stop like it revs up until 4K rpm then it engages and busts a wheelie but if I slowly let onto the throttle it will engage from low rpm Is this normal? I am not sure it is my first torque converter and don’t know what to expect. It is quite scary to ride 😂

[@christiancole2134]

That 4 bolt sproket will fit on a stock rear rim mine has 6 bolts in it ?

[@tylerchambers5077]

also is it normal for a newer clutch to get really hot? do you have to break them in? and why every clutch i buy they get super hot and smoke after riding for 2 minutes? and it seems that every clutch i buy the clutch isn’t engaging all the way on take offs. it’s just spins until it grabs then it takes off. can you please help me find a cheap 12 tooth 5/8 clutch for size 40 chain.

[@ilycluez]

Good gear ratio for a 12 inch tire I’m running 10 40 in the back it’s working good but I want it faster I feel like it’s not getting all it’s power want it hitting 75+ cause it’s a big valve head and fully built if you have time please answer I wanna know what’s a good gear ratio

[@l.a.m7645]

So you can use anti seize instead of oiling clutch?

[@aquacomfort2144]

is that a header or an exhaust if so what is it called because i cant find any headers for my 224cc predator

[@ferny4730]

will not putting anti seize cause the clutch too smoke?

[@yeliab814]

yeah you’re right , that’s a great combination gear ratio. seems like a fun ratio to ride. surprising that clutch is using metal on metal - i wonder why they do that. .

[@maxtracy6987]

i know IDK why it's kinda dumb I had mine get almost welded onto the shaft after two rides with lots of anti-seize.

[@trappinout18]

I think that way you only need to replace one at a cheap cost; for better or worse more frequently.

[@srcobra50]

Great content. How you like that 224 engine so far? Could you do a comparison of this clutch vs a hillard extreme duty clutch?

[@Black66]

Thanks! I like it. It's a little more involved when adding aftermarket internals as far as clearancing things. But that's ok. I'll do some more clutch videos .

[@BuckeyeBallistics]

So how long do factory wheel bearings last at these 50-60-70mph speeds?

[@Black66]

We are going to find out! That is what this channel is about . Pushing boundaries

[@Jugger_Nutt]

What is that gas tank? I love your videos, your vm22 carb tuning video helped so much :)

[@Black66]

Thanks! Its something I picked up from an ebay seller.

[@maxtracy6987]

I used the same clutch for more than 20 minutes with lots of anti-seize and it pretty near weld itself to the shaft. it's a great clutch for gear ratio but a waste because there is no brass bushing.

[@Black66]

Yes, If you go to the 11 thooth version it has the bushing.

[@ManhatanProj3ct]

That's my concern.

[@ziggybammurphy1645]

Do all the regular modification parts for the 212 fit the 224? Awesome build btw

[@Black66]

The external parts will interchange other wise you have to use clone stuff. Check out this link gokartnerds.com/performance-parts-for-predator-224/

[@PopeyesCreeper]

have you seen the 224 upgrade kits on ebay? its not billet parts but they have a flat top piston kit that has a Cast 10k rpm flywheel 28 degree advance and Cryogenically Treated Cast Connecting Rod..wondering what you think of it, if its worth or not

[@Black66]

Yes, I have seen this kit. A good inexpensive upgrade. That would really be a sweet kit if you spent a little more and added a billet rod. Then you could do whatever mods you wanted to in the future for a lot more RPM .

[@julianbloedow9164]

Is that frame stock?

[@tonyalto1014]

Don't know if I'd feel comfortable running that clutch with no bushing. I might go up a tooth in order to have room for a bushing, and add a few teeth to the rear to get close to the ratio.

[@Black66]

I constantly keep it lubed up.

[@bobby5139]

Would you consider putting on a small turbo on one of your mini bikes? I see it done on 4 wheelers and go karts lots but would love to see it done on a bike and to see the results.

[@Black66]

Oh for sure! I would like to do that.

[@brandonthomas8209]

Where did you get your clutch cover from great videos my man

[@Black66]

Thanks! Its a 3D motorsport cover from a 3D manual clutch.

[@justbuilds8248]

does ur chain also sometimes fall off or no ? idk mine does a lot esp 35 chain

[@Black66]

It doesn't fall off. I use RLV gold on gold 35 chain.

[@abdoabdullah6216]

@Black66 what sprocket setup do you recommend for a doodlebug with a stock predator 212 and 13inch tires …. Currently has 75 and 12 tooth lookin for a little more top end

[@Black66]

If you throw a 15 tooth clutch on there it will have a lot better top end. Ya, it will be less quick,but you can always gain the quickness back later with engine mods.

[@abdoabdullah6216]

@@Black66 okay thank you im going to try that out

[@shamarbrown2568]

Can I ask you a question? if I want the coleman mini bike to go faster all I got to do is put in a 212cc predator?

[@Black66]

Check out this playlist kzbin.info/www/bejne/jmG2nnSQf5ukjZo

[@andrewbrown3123]

Does the 224 bolt pattern match up with the CC100X or do you need a mounting plate?

[@Black66]

It will bolt up on the stock mount but to set the engine more centered for a cleaner install you could drill new holes or add a mounting plate.

[@jdasilva367]

Hey I have a 73 sprocket in the back and a new clutch 16 tooth max torque same from this video . But what chain should I get? It seems my chain is hitting the clutch and its also smoking n sparking when I ride

[@Black66]

Must be out of alignment or something. I try and use RLV gold on gold when I use 35 chain.

[@JVScustoms]

Hey quick question…which is a better cam, the fire 265 or mod 2?

[@Black66]

I like the 265 better , but that's just opinion. Others might say different .

[@savagebio842]

Fire 265 is better from top to bottom... I have the 🔥 265 cam in my tillioson 212r .. stock pvl flywheel 26mm nibble carburetor.. 26lb valve spring... Stage 4 header pipe.... Straight chain 12 tooth max torque clutch and a 50 tooth stock rear sprocket on a Coleman ct200 ex and I went with 15In tires Man she fly's I did 72 mph.... And she still was pulling.. I ran out of road I'm from Tallahassee Florida..

[@Citytreess]

@@savagebio842 what size chain you running ?

[@chasehuff6585]

Putting a 224 in my Coleman 100 just wondering what the specs on the chain and rear sprocket are ? Thanks just want to buy everything right the first time

[@Black66]

I have done so many videos with this bike it's hard to remember. I talk about the ratio used n the video. Check out the 224 playlists for many more combos with this bike and others. kzbin.info/www/bejne/iZLbdHalpq9jiLc

[@punishersoriano2895]

Hey new to mini bikes, just got a 224 predator. Will a clutch from a 212 fit??

[@Black66]

Yes

[@jokerrr14]

So how many teeth i. The back with a 10 tooth clutch do i need to go 50+?

[@Black66]

The bike used a 10 tooth clutch in this video.Here is the link. Also check out the cc100x playlist for more combos. www.ebay.com/itm/192090720707?hash=item2cb97fc9c3:g:BQ0AAOSwGzRhllkE

[@Rooster_B18C]

What jack are you using?? I like that.

[@xaviermccloud4586]

Lawnmower lift from Harbor Freight. Thank me now.

[@albertpeterson7134]

Black66. Would It Be Any Faster With A Torqueconverter?

[@bradenublish3710]

no, it would lose some top end but you would get alot faster acceleration.

[@tylerchambers5077]

what size chain do you use? i have a size 40 chain and i can’t find a 12 tooth clutch for a size 40 chain.

[@Black66]

I use RLV Gold on Gold 35 chain. That stuff is super strong

[@tylerchambers5077]

@@Black66 also is it normal for a newer clutch to get really hot? do you have to break them in? and why every clutch i buy they get super hot and smoke after riding for 2 minutes? and it seems that every clutch i buy the clutch isn’t engaging all the way on take offs. it’s just spins until it grabs then it takes off. can you please help me find a cheap 12 tooth 5/8 clutch for size 40 chain. please help

[@Deucealive75]

@@tylerchambers5077 Clutches get hot. Especially from a lot of stop and go riding. They do not need broke in. They can also get very hot from improper gearing. Improper gearing is hard on a clutch. The rider can also make the clutch heat up. You can't baby it, you have to throttle it and go. You're not going to find a 12 tooth 5/8 for a 40 chain. I don't think anyone makes them. Sounds like you need to use a 35 chain.

[@tylerchambers5077]

@@Deucealive75 thanks bro

[@wannabecarguy]

Nothing compares to the ysr 50. Why hasn't anyone tried?

[@rickgrimes4133]

What state do you live in? It’s beautiful.

[@Black66]

AZ

[@samsgarage1716]

You should put the 12 tooth clutch back on.

[@Black66]

You know I will. The channel is about testing different combos. Any given combo will last for a couple videos and then its off to something else.

[@thefishingchannel3192]

Hey does anyone know what rpms a billet flywheel is rated for?

[@JVScustoms]

All of em

[@thefishingchannel3192]

@@JVScustoms 😂 sweet

[@santasdoom5791]

did you put a 420 chain on the ct100x?

[@Black66]

No, I use RLV Gold on Gold 35 chain

[@santasdoom5791]

@@Black66 How it holding up? I dropped the 224cc on my ct100x and the chain came out. Probably was too loose :( can you send me the link to your chain ?

[@andrewbrown3123]

Where can we buy this clutch and the back sprocket?

[@andrewbrown3123]

I trust you better with information about mini bikes

[@Black66]

I will usually put the links for the parts used in the description of the videos way down at the bottom.

[@kc37]

Hi