Predator 670 Fuel Solenoid Removal/Cleaning and Carburetor Information

[@MannyWashes]

Showing how to take apart the engine to get to the fuel shut-off solenoid and guide for cleaning, plunger removal or solenoid deletion. Provide fuel shut-off solenoid thread and o-ring dimensions. Also show briefly how to clean carburetor bowl and jets.

[@michaelduran8392]

Great step by step video. Your research and explanation are clean and clear. Thank you as this video will go a long way into helping many others. Take care!

[@MannyWashes]

Thank you Michael I really appreciate your feedback.

[@ktpowerwashing]

I think you are right, 2½ turns from the bottom for the screw adjustments on the carb. Great video tutorial, easy to follow, well explained. Thank you

[@MannyWashes]

Mine from factory was roughly 3 from bottom. One was 2-7/8(right) and the other was 3-1/8(left).

[@ktpowerwashing]

What size pump you running with your predator

[@MannyWashes]

@ktpowerwashing the general pump tsf2021 8gpm although spec sheet says 8.5 gpm.

[@TonysTractorAdventure]

Thank you for taking the time to make this. Very helpful!

[@brusslysb]

Thanks for the awesome video!

[@jamesstanley5503]

Nice tutorial on the 670 carburetor assembly, thanks for taking the time to post, cheers. 🤩

[@michaelduran8392]

I just came across your video. Sometimes it takes a little to get out there but I Thank You as your video and explanation was clean and clear. This video will help so many like myself please make more video.

[@matthewgarner780]

Having issues with too much fuel or like choke is on ..when cold runs good then chokes and black smoke..low power..help Thanks for great video..40 hours..4 engine always Having running issues

[@MannyWashes]

What fuel pump are you using?

[@matthewgarner780]

@MannyWashes factory..it is working but wondering how to check pressure but seams to run fine for 2 seconds then starts to choke out..

[@MannyWashes]

Have you taken the carb apart to verify the float needle is moving to make sure that fuel isn't coming in when it's not needed?

[@matthewgarner780]

@MannyWashes no ... but will need to..is such low hours but is 2 years old..thanks

[@matthewgarner780]

@MannyWashes tried again runs good for few seconds then the governor kicks in and gas sperts out of carb. (had air filter housing off) so gonna take apart and let you know Thanks

[@migueljose2944]

Very good! Thanks

[@Macc1023]

Thanks so much for making this. It helped a ton you did a great job explaining it. I appreciate you passing the knowledge on!