Silverado Prerunner Rear Bumper & Tire Carrier - FullDroopTV (Season 1, Episode 4)

  Рет қаралды 110,048

Dirt Life Magazine

Dirt Life Magazine

Күн бұрын

Пікірлер: 76
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Wow Alex thank you so much!!! It is comments like yours that make all this work worth it. We are already working on season 2 so there is more to come
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
No worries and yes you need bumpstops. The where part depends on the kit you buy, the fiberglass fenders and wheel and tire combo you choose. After the fiberglass fenders are installed and the kit, you need to have the wheel on and use a jack to cycle the suspension up just before your tire hits the fender or anything else. The bumstop needs to be placed so that when it is fully compressed it will stop at that point to protect the fenders.
@alrodrodriguez
@alrodrodriguez 11 жыл бұрын
you guys do amazing work, I cant believe you don't have way more views and subscribers I will be sure to spread the word about you, some of the best truck vids out there!!!!!!
@kblaylock9244
@kblaylock9244 11 жыл бұрын
Thats the sickest bed cage i have ever seen!
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Not for this project but our upcoming F150 build will include a shock tower brace that goes over the engine. Usually an engine cage is only built when you full cage your prerunner.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Glad you like the show James!!!
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
That is the PipeMaster...make sure you get one for the tube size you are using. The one we used was for 2" tube but they have other sizes.
@chodercutthesass
@chodercutthesass 11 жыл бұрын
My big brother is building his own ranger pre runner! Its pretty sick!!
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Glad you like it. There are 12 hours into each arm of this bedcage, but it was worth it.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
It is aluminum, for our F150 build we might experiment using HDPE plastic. Rock Crawlers have used this a lot on their rock sliders, and it just slides right off the rocks.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Glad you like the show!!!
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
There are a ton for both trucks. Try Dixon Bros Racing for the Ranger kit. They also make one for that Silverado in 4WD
@7hoe2Hockey
@7hoe2Hockey 11 жыл бұрын
hey guys, im going to be going to college for fab and suspention. i was wondering if i could come by the shop sometime and just have a look around, talk, and hopfully work out some front and rear bumper ideas for my ranger. by the way i DO live in vegas.
@alrodrodriguez
@alrodrodriguez 11 жыл бұрын
You're welcome, I am just here addicted to your channel now, just dreaming of things to do to my truck haha
@alrodrodriguez
@alrodrodriguez 11 жыл бұрын
Sure thing, I'm sure you'll be hearing/seeing more from me all the time
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Thanks glad you like it!!!
@jameseggins3416
@jameseggins3416 11 жыл бұрын
Looking forward to season 2!
@TheRCFantasy
@TheRCFantasy 11 жыл бұрын
I can't wait for tomorrow!!! New episode!
@northstarracing18d-4d
@northstarracing18d-4d 6 жыл бұрын
Awesome found something on other offroad vehicles that a spring car uses. Duce buttons are the bomb use them for all body panels on the car
@Beardcore1982
@Beardcore1982 11 жыл бұрын
Great video!! You guys do really nice work, I'm getting a lot of ideas from your videos.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
So are we!!! Go to our channel to view the sizzle reel for season 2 if you haven't already.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
You can find them at Kartek or Butch's Speed Shop.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
It is here in Las Vegas...each state might be different.
@zednem17717
@zednem17717 11 жыл бұрын
where can i find the tool you are using at 5:20 in this video. sorry i do not know the name you seem to be getting a reference to cut the end of the tube.
@IamDtvStudios
@IamDtvStudios 11 жыл бұрын
Will you be making an engine cage?
@traxxasslash997
@traxxasslash997 11 жыл бұрын
Sweet, i want a Silverado but the rangers are cheaper and with the ranger being small would that effect anything?
@jethi511
@jethi511 11 жыл бұрын
Hey guys, im building a buggy with similar aluminum paneling, I was wondering where you guys source your fasteners?
@traxxasslash997
@traxxasslash997 11 жыл бұрын
Sorry for all the questions but for the bump stops where would I mount them or would I even need them?
@traxxasslash997
@traxxasslash997 11 жыл бұрын
As of right now I don't have a truck but my main choices are a 2003-2006 Silverado or any year ranger I can't seem to find any prerunner kits for both truck what brands do you think might have some?
@makhsdrosos7689
@makhsdrosos7689 7 ай бұрын
❤prerunner build and tuning
@dirtlifemagazine
@dirtlifemagazine 5 ай бұрын
Glad you like it!
@Chandlertheshredder
@Chandlertheshredder 11 жыл бұрын
Where can I get that tin roller?
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Yes it is our truck.
@collinpadilla
@collinpadilla 4 жыл бұрын
how come you didn't want to center the tire weight in the truck or over the rear axle? Is the some advantage to extending it out over the edge
@collinpadilla
@collinpadilla 4 жыл бұрын
also what is that tube notching template you used. I've been notching with center line measurements and that would speed up my productivity 10 fold
@bradleyjensen6055
@bradleyjensen6055 11 жыл бұрын
where did you purchase the license plate light from? im getting ready to do my rear bumper soon and dont want to risk the ticket for not having a properly illuminated license plate
@boostedsti06
@boostedsti06 11 жыл бұрын
prerunnermaniac what brand of tube bender are you using there? would you recommend it?
@rcairforceone
@rcairforceone 8 жыл бұрын
FD TV, how many hours of fabrication would you estimate for the rear bumper and bed cage?
@FUPRODUCTIONS66
@FUPRODUCTIONS66 11 жыл бұрын
you guys should wrap this car in matte metalic grey!!!
@callofduty54able
@callofduty54able 7 жыл бұрын
what material tubing do you use?
@cj187mtz7
@cj187mtz7 7 жыл бұрын
U guys need to make a older year silverado pre runner
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Wow thanks John !!!!!
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
I think we got them at Pep Boys
@mitchschutter4302
@mitchschutter4302 7 жыл бұрын
Do most trucks of this style have the rear tires sitting in almost the stock track width like that while the front long travel kit causes the front tires to be extended? In the beginning of the video the difference just seems so extreme.
@AbdomialSnowman
@AbdomialSnowman 6 жыл бұрын
its a stock axle, so its deep in the wheel wheel, normally no
@daltoncahn55
@daltoncahn55 9 жыл бұрын
Hey guys i have a 97 silverado and want to make a custom spare tire holder and rear bumper but don't know how to make the dimensions right and all the angles. I would like something similar to the one you built on the 07' silverado. Do yall have any steps or blueprints i can follow to build one?
@dannyjuarez4941
@dannyjuarez4941 6 жыл бұрын
You made me fall in love with welding...
@nicholassweeney7570
@nicholassweeney7570 6 жыл бұрын
What serie aluminum is this? Also what is the thickness?
@johnsierra5784
@johnsierra5784 11 жыл бұрын
you guys need more views, i have over 20,000 likes on my pre runner Facebook page and im going to post your vids!
@dcman581
@dcman581 9 жыл бұрын
Mig welder?
@evanrivas6489
@evanrivas6489 9 жыл бұрын
So. I got an old 86 Dodge Ram for my 16th birthday. I know, not the greatest truck. But I wanna do some modifications to it. What do you guys suggest I do? Love the show. thanks!
@jacobturner6646
@jacobturner6646 9 жыл бұрын
What do you mean? Dodges are great!
@FIRENICEWOLF
@FIRENICEWOLF 8 жыл бұрын
+WitherTux old ones are even better
@jacobturner6646
@jacobturner6646 8 жыл бұрын
+FIRENICEWOLF Yeah, they are.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Just don't try to make your Ranger too light. Shocks need the weight to work properly.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
It is just a matter of choice...what we felt like doing for the show...
@robbrown6107
@robbrown6107 2 жыл бұрын
cool channel thanks
@FUPRODUCTIONS66
@FUPRODUCTIONS66 11 жыл бұрын
o, i thought it was like your guys truck haha, what ever tho black will be awesome as well
@traxxasslash997
@traxxasslash997 11 жыл бұрын
Ok thanks
@traxxasslash997
@traxxasslash997 11 жыл бұрын
Will this be street legal?
@manuelcarmona5747
@manuelcarmona5747 6 жыл бұрын
You weld the bottom an Bolt the top.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Whatever you do to your truck visit our site and send us some pics
@brentsky91
@brentsky91 10 жыл бұрын
What state are they in?
@depp763
@depp763 7 жыл бұрын
vegas
@ianalderson6929
@ianalderson6929 10 жыл бұрын
What model truck it this please!?!?!?
@dirtlifemagazine
@dirtlifemagazine 10 жыл бұрын
2007 Silverado
@ianalderson6929
@ianalderson6929 10 жыл бұрын
Do you know where I can get one cheep without the upgrades
@rcairforceone
@rcairforceone 8 жыл бұрын
+ian alderson Anywhere you look? Cheap is subjective. You can find these anywhere from 11-30K, depending on year, mileage, and options. 4.3L V6, 4.8/5.3/6.0 V8 engines are available. There is also a 400hp 6.2L engine available as well, but you won't get one 'cheap'.
@karinareich7857
@karinareich7857 7 жыл бұрын
Hello i'm from Russia. This car can driving on the city roads at USA ?
@kyle2951
@kyle2951 7 жыл бұрын
Karina Reich yes it can drive in the city
@texasmadebull
@texasmadebull 11 жыл бұрын
Adem Martin Del Campo, awesome we have the same last name lol
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Well the owner wants it black...we are waiting to get the 'glass back from the painters.
@dirtlifemagazine
@dirtlifemagazine 11 жыл бұрын
Really? I guess we are related in some way...not a very common last name.
@tateshugart7023
@tateshugart7023 8 жыл бұрын
dude please tell me the background music? its legit
@ssampson572
@ssampson572 6 жыл бұрын
Shut up that guitar, ,,
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 31 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 140 МЛН
Как Я Брата ОБМАНУЛ (смешное видео, прикол, юмор, поржать)
00:59
James Duff Heavy Duty Stock Bumper Tire Carrier Install
16:34
Bronco Garage
Рет қаралды 12 М.
JET JON BOAT BUILD PART 2 - Installing the Jet Pump
15:36
Catman DIY
Рет қаралды 46 М.
Prerunner Ranger: Headers & Shocks | Xtreme Off Road - S6, E1
20:18
TFS: How to Notch Tubes Without a Tube Notcher
15:01
The Fabrication Series
Рет қаралды 5 МЛН
Silverado Prerunner Bedcage - FullDroopTV (Season 1, Episode 3)
21:31
Dirt Life Magazine
Рет қаралды 97 М.
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 31 МЛН