Pressure washer surging fix! 😉 subscribe if this helped you im trying to grow my channel.

[@AbdulWahab-rp1kz]

I am having the same issue with my pressure washer but my PW pulses much faster. I have cleaned the pressure tip also but in vain. Please suggest me any other solution. Thankyou.

[@petervanderheiden2066]

Delwin, I subscribed! This absolutely works!!! I wasted hours going to a dozen other sites with people guessing what could be the problem that others were presenting. But your KZbin video both demonstrated the symptoms exactly and the solution that clearly worked for you. I was still doubtful because I had three nozzles (25 deg, 40 deg and turbo) that all sprayed but all exhibited the same surging result. Surely they couldn't all spray yet be clogged enough to exhibit this problem in the exact same manner! Well I was wrong. One by one I cleaned them. One took two cleanings, one took three and one took four cleanings. But they all worked in the end, spaying perfectly with no pump surging at all. The back pressure created by a slightly clogged nozzle is enough to throw off the pressure sensor that controls the pump, making it think that I was releasing the handle (shutting it down) only to think the next second (because water was still flowing and the pressure then dropping) that it need to turn the pump back on...... over and over, surging endlessly. You are the man! Thank you!

[@DFRxSTANCE]

Thankyou it was a fustration of mines and i use it for business time is money and i myself felt the fustration from searching for fixes so i wanted to make this as straightforward and quick as possibe for all to continue to their daily lives. Thanks for the super positive feedback and the info on the pump sensor i appreciate you for the follow man all love. Cant wait to finish up my masters in nursing so i can get back to this car and mechanical stuff for you guys thanks a million bud you guys keep my heart pumping

[@charlenecoles4146]

THANK YOu!!! A million gazillion amounts of stress saved! Thank you

[@cowboywealth1830]

Thank you Delwin. Had the exact same problem. Tried DW40 with no luck, then i stuck a thin wire into the hole and BOOM BABY, it worked. Thank you so much for the practical HACK. Much appreciated!

[@DFRxSTANCE]

Glad it helped

[@fredkeller3813]

WOW! I was fixing to go out and buy myself a new power washer even though my motor was running fine and even coming through the hose. Never imagined it would be a small piece of dirt or whatever obstructing the whole thing. Thank you so much! I owe you lunch. :-) God bless

[@DFRxSTANCE]

Not s problem glad it worked out for you.

[@BrewCityRider]

Thank you sir! That wire through the nozzle deal fixed me right up! So simple too. 👍

[@katrina61788]

Thank you! This issue was driving me batty! I swore it was the power source from the back of the house, so I ran a cord from the front and it still did it. You saved my sanity, thank you!!!

[@charlless5429]

My pressure washer is gas engine driven, but the water action from the wand is the exact same as what you first show. I checked hoses, water supply and such, but I didn't check to see if the pressure nozzle had a blockage. I didn't know it could make such a dramatic difference. I know now. Thanks

[@maryhoffman2547]

Thank you! Omgezzus, mine has been doing this. Drives me nuts while washing my cars. Have a great day. Thank you again for taking time to share your knowledge.

[@ragoodi57]

thank you so much, I have a sunjoe that was doing the same thing.. now I know how to fix the issue,,, great video thanks again

[@DFRxSTANCE]

No prob

[@2hearts620]

Hey! Thank You! Your advice fixed my pressure washer issue. It was surging too with the way water was coming out, so I took a wire and worked it through the hole several times at the end piece where the water streams out, and Voila!!!. Thanks again!!!and God Bless!!!

[@JacquelineCook-gq8yk]

This worked immediately!! Thank you so much!!

[@DFRxSTANCE]

Not a problem please share with friends i love making videos simplified enough for everyone to try at home with great results of any trouble shooting.

[@haught-tonofvideos1210]

You stuck the welding wire into which part ? The attachment you took off and put in the WD-40? Or the long stick attachment?

[@stith1]

The attachment he took off

[@BobSmith-jz3wf]

Thanks Big Dawg! Appreciate the extremely helpful info!!

[@DFRxSTANCE]

No prob

[@jonnybravo4389]

I'll give this a try tomorrow, I just got a free gas powered one that a guy was throwing away because it was surging. If I can get it working right I'll have acquired a $400 3000psi pressure washer for FREE

[@psycosurfing]

Thank you so much I was about to purchase a new one. Its working again!!!

[@DFRxSTANCE]

Not a problem

[@Liston29]

Thank you! Just broke it out for the summer and I could find nothing on this anywhere.

[@בועזשגב]

Thanks a lot! You've just saved me a lot of time.

[@DFRxSTANCE]

Hope it helped no prob.

[@boblombardi9397]

Wow ...amazing....Thank You

[@aleksis5gadi240]

Thank you! This fixed my problem! 👍

[@JC-qt8in]

Damn thanks man I had the same problem! I used the wd40 and it worked!!!

[@DFRxSTANCE]

Nice

[@Myhandlenagluho]

Thanks bro! Nicely presented!

[@sidneyhaynes4625]

What if it keeps surging like that? Not even pulling the trigger.

[@nogster]

Thanks for entertaining me

[@DFRxSTANCE]

Any time

[@Seeker3876]

Mine is not the nozzle. The unit pulses when the nozzle is not triggered. It pulses with the wand shut off. Nothing can fix this.

[@magnacircenses]

Thank you!

[@spicky2966]

both worked it soften it up for cleaning......

[@DFRxSTANCE]

True. Positive vibes thanks bro

[@deadfoot991]

Thanks for posting!!!

[@DanielMillbank]

Thank you!!!

[@DFRxSTANCE]

You're welcome!

[@brianmatthews609]

Worked ofr me too..thank you

[@DFRxSTANCE]

You're welcome!

[@donnasherban7907]

I used a pin to clear the nozzle head.

[@shakeitshakeitbaby]

Thanks dude ! 😀

[@robs9324]

Mine pulses without squeezing the trigger

[@tonykash7901]

Yooo first again fam

[@DFRxSTANCE]

My guy 💪🏽