PRINCESS SEAM HALF BODICE TUTORIAL (BUST CUT)

[@naikobaannette3954]

My first time learning this bit can't stop smiling 😊😊😊😊🤝🤝

[@adebisiadeniji8910]

You make this lecture easy to understand. Really good. Thanks and remain growing in wisdom.

[@cleopatrasterling-colquhou9123]

Honey I am smiling because you solve my problem always wanted that front curve n couldnt achieve this properly but you help me to understand perfectly how to get this effect. Cisca u r the best. mwah hugs and kisses.. from Jamaica.

[@ciscastitches]

Glad I could help 🙂

[@nicholas.wangari8586]

Been checking other tutorials and this one beats all of them.so clear and straight to the point!! Thanks a lot cisca!!

[@olamidediamond]

Your tutorial is quite explicit. Thank you for making it easy for proper understanding. God bless you

[@triciaediale7105]

You're a good teacher. Thanks so much for teaching us. God bless you more and more. Pls I will appreciate if you teach us, off shoulder of it. I want to try the off shoulder . Thanks once again I'm grateful. Waiting for you please

[@ciscastitches]

Here it is ma'am kzbin.info/www/bejne/oaLPhWZ5Zr9gmbs

[@helsam7940]

sweethrt u are d best. so simple n well explained. God bless u

[@duahhannah458]

In love with the way you take time to teach and illustrate. I'm a big fan😍. God bless you

[@johnakakpo8146]

Very simple, clear and straight forward tutorial - great tutorial 👍🏿 Thanks a lot

[@emyepeh6840]

You are the best, so clear and easy to understand. Thank you. I have two questions; 1-how is the bust point obtained and what is the use? 2-How do you draft the back of the half bodice?

[@ciscastitches]

The bust point is obtained by measuring from your shoulder to your nipple point. It is needed in Dart creation .The tutorial for the back half bodice is here. kzbin.info/www/bejne/gZuoaH-MZqppp6s

[@abigailidongesit3626]

Simple explanation and straight to the point..I'm Loving Cisca Already

[@veronicabonilla2659]

woman! by far the best explained tutorial that i have seen so far!!! thank you!!

[@adegbidinmaroufatou1595]

Very good , you are the best

[@brossyfred7832]

Hi, thank you so much, I appreciate your lessons. I noticed you started the tutorial with the lines already drawn. How do you get those lines? Do you just draw the lines anywhere or there is a specific formula and to get the lines before imputing your measurements

[@chinenye3348]

Well detailed 💖👍 Please, can I still add waden to it if I want to

[@judithemmanuel7575]

Yes you can

[@jewellmiller2]

I love your presentation

[@omoladeore9873]

Wow I love this simple and understandable, thanks

[@chemaynusrah5154]

Great tutorial, thanks for sharing part of your enormous knowledge. I kindly need to know the measurements from the shoulder line to burst line, then from burst line to under burst line, and from under burst line to waist line. Someone help me here...

[@dollybonde6874]

I really liked the video.....quite easy to understand.....but can you please explain how to measure bust point, bust line and under bust lines please??

[@ciscastitches]

Thank you...here is a video on how to measure yourself 😊.

[@shaunnagasar6368]

Great tutor ,easy to understand

[@ThatoKau]

Thank you so so much for the tutorial. This is exactly what I was looking for. My question is, can I use the same pattern to make a six piece flared dress. Once more, thank you.

[@msCandelicius]

You explained it perfect 💕 thank you so much!

[@yasmeensultana8852]

I like ur Vedeo thanks a lot for ur easy explanations l want to know how did u measured upper two bust line plz reply me about these 3lines

[@sandrajohn5415]

Easy and well explained. Thanks for sharing

[@triciaediale7105]

Thanks so much you're a good teacher. Pls can you also teach us how to cut off shoulder of it. Thanks

[@maryogunyomi8386]

Big thanks to you, so clear information God bless you.

[@ciscastitches]

You are very welcome

[@henrye8117]

Thank you so much for the tutorial. Pls how can the back pattern for this be cut?

[@deardearification]

Well done MA and may God bless you for the explanations. , pls if your burst span is 8" when marking directly on your fabric will be 4.5 including joining allowance or just 4"

[@ciscastitches]

It will be 4.5 inclusive of the joining allowance.

[@deardearification]

@@ciscastitches thank you ma

[@amaravivian7830]

Thanks for the video very simple

[@anwuliojeifo9035]

Thank you so much.is it the same cuting with the back side

[@ciscastitches]

No ma, Here is the back cutting video kzbin.info/www/bejne/gZuoaH-MZqppp6s

[@anwuliojeifo9035]

God bless you real good

[@joycelyneshun]

Hello Very detailed explanation but in your previous tutorial you ended up getting a sweetheart neckline. Please I am a beginner, how can I please achieve one. I am trying to recreate your maxi gown video..

[@ciscastitches]

Please send a DM to @ciscastitches. I will send you a video illustration

[@hairunnisha5443]

Clear explanation 👍

[@ohunenejessicaademoyo3030]

Great tutorial. Love you

[@elubiaozoremmanuella734]

Very simple explanation I wanted to ask two questions ****is bodice also a bustier if no what's the difference? **** must I always draft out on a cardboard sheet before transferring to the fabric? Thanks

[@ciscastitches]

Bodice is just a term for a close fitting upper part of a dress. And no, you do not have to draft on cardboard. You can do it directly on fabric. Drafting on pattern paper first helps eliminate possible mistakes.

[@deborahechu9612]

God bless you sister I really appreciate you on this teaching my question is how do you measures for the Bos of 40 for princess Dat , you so 36 Bo's and you mark 8.5 straight down , so how much will be for bos 40?.

[@ciscastitches]

You can go with 9.25 to 9.5.

[@blessingbliss1155]

Nice one! Pls I still want more clearance, is there a way I can't one on one class with you?

[@ciscastitches]

Yes you can. Send me a message on Instagram. @ciscastitches

[@abosedejacob8065]

Thank you for the tutorial. Very helpful. Please may i know why you added 2inches dart to the under burst and the waist line, because I noticed that from the beginning of the tutorial, you only added 1inch to both side of the dart on the waist line and half inch on both side of the under burst. So the 2inches you added to the circumference of the waist line is not clear to me? I was expecting it to be 1inch since it was half inch you added to the both side of the dart. Thanking you in anticipation for your quick response.

[@ciscastitches]

Hiya, I added 1 inch dart on both sides of my bust span [nip to nip distance] at both the under bust and waist, making a total of 2 inches. I want to believe that because I used the middle of my taperule to mark the dart, it looks a bit confusing but you can look closely and see that it is 1 inch on both sides I marked. I was scared that I had made a terrible mistake, lol.🙂

[@omololaojo2721]

Ok pls is it a must underbust dart must always go with d waist dart especially in a straight gown. If yes does it also apply to blouses too

[@ciscastitches]

Not necessarily, for straight dresses that don't require joining I don't bother with under bust dart, I just work with the waist. If it is a blouse you can make the waist dart the same as the under bust or less.

[@Ral...]

Will u use same to cut the back?

[@serendipity5832]

Hi ... please im a beginner n wish to enroll in a fashion school bh want to know some basics before .... ##please my question is,,##How did u get those 4 straight lines from de beginning of de video??

[@ciscastitches]

Hiya, please watch this video to understand how I got the 4 lines. kzbin.info/www/bejne/g5eyinZviNdkrdE and this kzbin.info/www/bejne/ipTYf5uPp6eFj9U

[@chandrikakotwal6557]

Super I like your teaching methods thank you Medan

[@FOOD-EMBASSY]

Very easy video. Is there a tutorial for the back bodice pattern

[@ciscastitches]

Yes there is, right here - kzbin.info/www/bejne/gZuoaH-MZqppp6s

[@gracegyet]

Very informative and helpful. Love it.

[@VathsalyaJewellery]

Thank you for your tutorial. When I keep back neck deeper of about more than 8 inches my shoulders were falling ,can u please tell what to do for deep back neck

[@ciscastitches]

Reduce the neck width for a deeper neckline. Your shoulders won't fall.

[@VathsalyaJewellery]

@@ciscastitches Hi Cisca thank you so much for ur reply. Need broader neck too, should I reduce shoulder and armhone both

[@jacquelinefungo1271]

My dear you are the bestest..... i was cutting along with you hahahahaha!!! It was stressing me. Lemme follow you on instagram i will show you what am making

[@egemonutheodora2770]

Is there anything like raise measurement from the neck that is gotten by dividing ur chest by 6?

[@bittudeepti]

Hi Can you please show the same on fabric nd stitching too...

[@omololaojo2721]

Hello ma'am good illustrations pls can I ask a question out of current tutorial?

[@cynthiaadom8932]

Thanks for the tutorial but why do you draw lines already on your paper before explanations? What is the interval between the BL and the BP? I asked because I watched the CB draft video and realized that you measured 1inch on the grain line and still had some extra measurements between BL -BP. Please answer

[@ciscastitches]

I have a detailed video already on how to draft a basic bodice which involves those lines. The bust line is the horizontal line drawn where my armhole depth ends (vertical). The bust point line is the vertical distance from your shoulder to your nipple point. There is no standard distance from BL to BP.

[@cynthiaadom8932]

Cisca Stitches thanks teacher

[@parveezkhanum8426]

Fantastic tutorial 😘😘😘👌👌👌

[@ngozichinyere1400]

So easy to understand thanks alot

[@queenada1243]

Thank you so much ma but please how did u get d BL How many inches from BP🙏💕🙏💕🙏💕

[@ciscastitches]

I have a tutorial on how to take measurements here kzbin.info/www/bejne/g5eyinZviNdkrdE

[@theresachidothi480]

Thanks very much madam, it had been helpful.l will try it soon. What is the measurement or position of the under bust?

[@folashadeimisioluwaobada2484]

Thank you, well explained💛

[@shopstar8181]

Good teaching thank you

[@aniduaisha6620]

Good day. Please I would like to ask. When your Bodice(half cut) back is longer than the front when sewn despite cutting them equally. What is the fault?

[@xzx3]

Very nice and clear video. Thank you, this was very helpful👌

[@judithemmanuel7575]

Did you add half inch to all your vertical lines

[@designermirri5519]

Simple and nice presentation. Love it. Thanks

[@auwalumunkaila318]

My question is that is it how you cut bres

[@obajeanthonia5255]

Waoooo very help but at some point I got confused. Pls how did u get all those lines?

[@ciscastitches]

Do watch this tutorial for better understanding - kzbin.info/www/bejne/ipTYf5uPp6eFj9U

[@bukkyolowookere6325]

I appreciate your teaching more grace you make more easier.

[@av.h9497]

My french curve was not able to connect my bust point up by 1inch to the 0.5 inch arm hole points....😥😥 used a straight ruler....wuld it give the same results when cut???

[@ciscastitches]

For me I marked 0.5 inches above bust point before connecting to the armhole. It's not necessary for it to reach the 0.5 inch above bust point (in your case, one inch) if you noticed in my video. You can use freehand to finetune the lines before cutting. I believe it should come out okay.

[@mangekvandoline2605]

Please how do you arrive at the measurements for burse point line and under burse measurements?

[@ciscastitches]

Please watch the how to take your measurement video - kzbin.info/www/bejne/g5eyinZviNdkrdE and how to draft a basic bodice video - kzbin.info/www/bejne/ipTYf5uPp6eFj9U

[@marysellers9468]

How do you join them, the princess dart

[@ezeelizabeth1965]

How many time did you fold the paper

[@obasibenedicta8680]

Wow thanks so much

[@okororosechimdindu3710]

Pls kindly explain the difference in putting your bust measurement in the chest line and putting in the bust point line

[@odedelefunke6915]

I need more explanation how cut princess seam

[@umohvictoria1834]

Finally a perfect tutorial! Thank youuuuu

[@Jozbabey]

Thank you for the tutorial. You didn't indicate the measurements used in drawing the shoulder bust and waist line

[@kosishirley3173]

How did you get the bust line?....why didn’t u cut the back

[@motunrayopaul3454]

Can I cut the back normal

[@aoshadon]

Simple and easy ❤

[@jackiet1042]

How did you get the under bust line?

[@adewaleopeyemi9064]

Love dis😘

[@omotoshoolajumoke564]

How did you get those lines?

[@dtee7811]

Please how can sew the princess dart without it folding close to the armhole.

[@khatushyamkikripa2714]

Please stitching karke bhi dikhana

[@muhammadkunhi.a8669]

Very good and very nice soooooper

[@sarmisthamohanty5495]

Excellent

[@otugoemeka4681]

Well done pls can who how to do the lines

[@ciscastitches]

Hiya, please watch this to know how - kzbin.info/www/bejne/ipTYf5uPp6eFj9U

[@Ifedilichukwuokoye]

Ma please how can I determine nipple to nipple measurement without measuring it.

[@mukumbimbonge2210]

How did you get those lines? You haven't explained how because you have started explaining with the lines already on the paper.

[@manjulashone]

Wowwwww

[@gloryuyah1373]

Thanks dear

[@go-with-goutambiswas]

It may be more attractive if you could show a complete garment made using this pattern. Then the learner could better understand the appearance and fitting. Thank you.

[@ciscastitches]

There is a video on how I used this pattern to make a cape sleeve blouse here - kzbin.info/www/bejne/aV7EZHpnapd3mtU

[@ifymimi5795]

Please your fast in taking measurement, And how do I join material after cutting it please. What I learnt today is to get all the measurements rulers.

[@swapna250]

Thank u maam 🙏

[@jemmimarajam4793]

Thankyou sissy for such a nice explanation

[@cynthiaokedo7840]

You're good dear

[@empresso4357]

Your videos are really very educative.... Pls if I want to add a breast pad to it, should it be on the bust line or the bust point line? Thank you

[@ciscastitches]

Thank you🙏🏾. Place your breast pad at the Bust point line.

[@sanskriticreations63]

Beautiful

[@dalyn1258]

How to make the back pattern for this? Thank you!

[@ciscastitches]

Here it is - kzbin.info/www/bejne/gZuoaH-MZqppp6s

[@mahendragehlot378]

Nice video madam post stiching video also

[@ciscastitches]

Here is the stitching video ma kzbin.info/www/bejne/aV7EZHpnapd3mtU

[@bollywoodworld1981]

mam pls tell the measurement from bust. line

[@nuraqilah7941]

Can i have the link for basic bodice pattern?

[@janeezionye1407]

What’s the difference btw a burst line and a bust point line

[@ciscastitches]

Bust line is the horizontal line where your vertical armhole line ends. Bust point line is measured from your shoulder to your nipple. Hope I answered your question. For how to draft it on paper/fabric please watch this video kzbin.info/www/bejne/ipTYf5uPp6eFj9U

[@Rakshak728]

Nice mam

[@edehcharity8052]

Thanks l like ur teaching

[@Ellacansew1]

Hello cisca... Weldon...🥰🔥👍

[@ciscastitches]

Thanks babe❤

[@JohnPaul-ge9tj]

Please Teach me how to cut bishop collar neck

[@ciscastitches]

Will do.