Printer Drawers For Ikea Lack Table Assembly Instructions

[@TheCellismile]

amazing work :) Loveit and print it this time ...regards

[@Filagram]

Hi, i really love those drawers. But your source file is not available anymore. From where can i get the files now?

[@GrumpySilverBack5]

Same here the files are no longer available on prusa website, would love to get them.

[@PORRAS93]

Hi, all files are back online now at cults3d: cults3d.com/en/3d-model/tool/printer-drawers-for-ikea-lack-table

[@PORRAS93]

Hello, files are back online now at cults3d: cults3d.com/en/3d-model/tool/printer-drawers-for-ikea-lack-table

[@salmanslim]

What imperial size screws do i use? In the pdf it calls for 8mm screws but we use imperial system in united states.

[@greg_herhuth]

This is awesome. Excellent work. I have a few questions. I am going to print these out on a Prusa Mini+. Will any of the pieces require supports? Also, what material are you using to line the drawers with in the video at about the 7:32 mark?

[@PORRAS93]

Hello Greg, if you follow the pdf with the instructions you will see each part is detailed with the optimal orientation and main parametres. Basically, just three of the supports will need to be printed with printing supports, and those are the ones located at the middle. Also, the material I use at the bottom of the drawers to prevent the tools I keep inside from moving arround is EVA rubber, but any kind of thin foam will do the job.

[@alexthepunk]

What happened to all of the thing files? Thingiverse and Prusa don't have the listings anymore.

[@PORRAS93]

Hello, I had to move the files from PrusaPrinters so they are now available at cults3d: cults3d.com/en/3d-model/tool/printer-drawers-for-ikea-lack-table

[@ermesgentili9388]

Hello. your work is beautiful. I tried to recover your projects, but they are not on the prusa site. Where can I find the stl files? Thanks

[@PORRAS93]

Hello, I had to move the files from PrusaPrinters and it is now available at cults3d: cults3d.com/en/3d-model/tool/printer-drawers-for-ikea-lack-table

[@aaritbabu3398]

Hi, whenever I try to click on the link, it won't load up and it says Error 404. Can you please try reuploading the link files?

[@PORRAS93]

Hello, all files are back now at cults3d: cults3d.com/en/3d-model/tool/printer-drawers-for-ikea-lack-table

[@saveriodepalma7425]

hello is it possible to have the whole project in stl file? the remains of the components are not found

[@PORRAS93]

Hello, the hole project is back now at cults3d: cults3d.com/en/3d-model/tool/printer-drawers-for-ikea-lack-table

[@dmio7905]

lovly design. but the fly is open 2:56 thingiverse link?!

[@PORRAS93]

Hello D mio, you will find all files at PrusaPrinters webpage: www.prusaprinters.org/prints/77040-printer-drawers-for-ikea-lack-table

[@dmio7905]

@@PORRAS93 Thanks for your upload.

[@jaymejohnson571]

@@PORRAS93 that link gives a 404 error. Can you update the link? I was really looking forward to printing these drawers.

[@PORRAS93]

@@jaymejohnson571 Sorry for the inconvenience Jayme, this link should work: cults3d.com/en/3d-model/tool/printer-drawers-for-ikea-lack-table

[@PORRAS93]

SOURCE FILES IN CULTS3D: SOLIDWORKS MAKER cults3d.com/es/modelo-3d/herramientas/printer-drawers-for-ikea-lack-table This set of drawers was originally designed for an Ikea Lack table, although they could fit under any table with a gap of at least 450mm. I have released three models so far, one for the Prusa Mini, another one for the Prusa MK2.5 / MK3, and a third one without the plates support that could fit any printer. The drawers have been designed so that they don´t fall out when you pull from them so you can safely use them without worring of your stuff falling down. Only exception to this is the bin drawer, that has been designed in a way that can be easily pulled out so you can sweep your waste into it and also so that you can empty it easier. As I wanted the drawers to be fully customizable, I made the signs on the front removable, so you can easily take it out and change it. If you wanted me to design your own labels, feel free to contact me. A pdf file with the assembly instructions is attached, but also a video can be seen at Prusa Printers webpage. If you like the print, please like and follow me on PrusaPrinters: www.prusaprinters.org/social/111315-solidworks-maker/prints Or at my Instagram account: instagram.com/solidworksmaker/ #solidworks #prusa #prusamini #prusament #maker #3dprinting #3dprinter #3dmodeling #3d #3dprinted #3dmodel #3drender #3dprints #filament #material #colours #diy #thingiverse #prusaprinters #ikea #lack #ikeaideas #ikeahacks #drawers #organization #tidy