Great video! Camera angles and lighting help us to clearly see what's happening, the science lesson is very helpful, and the video is nice and concise. I look forward to more videos from you!
@RicksGarage4 жыл бұрын
Thank you for your comment! New vid should be ready relatively soon. Be sure to tell a friend (or several) 😆
@nicholaskelley09224 жыл бұрын
Have you made a video for bumper removal?
@RicksGarage4 жыл бұрын
@@nicholaskelley0922 There is definitely be a bumper removal video in the works!
@kingsleyabrokwah39304 жыл бұрын
Wow, this was incredibly informative and excellent camera work. Thank you!
@dusting51954 жыл бұрын
Subbed and liked. It's nice to see someone doing very straight forward videos without all the usual bull about here's a panel clip this is what it looks like, here is all my friends yelling in the background. Keep up the vids I have a 20 si and I will eventually mod but for now I am enjoying having a warranty.
@felixf52114 жыл бұрын
I'm surprised the car doesn't need a tune. As for larger diameter piping, it can move more air, but it will do so at a lower velocity. With a small, mildy tuned motor the latter matters. As the inlet/outlet sizing is essentially the same as stock, the transition to larger diameter piping can and will cause turbulence. Not great, either. I'm not familiar with this platform. FWIW, in the CT9A Evolution world we found that the UICP does nothing for performance in any configuration, and that the LICP can brings some small gains on a highly tuned motor.
@fredlikes14 жыл бұрын
Your right also with larger pipes you would need a larger turbo I would just leave the stock piping and a Intercooler would be perfect on the stock turbo
@RickJamesFPV4 жыл бұрын
Excellent video man! I'm I installing mine this weekend 🙂
@Meaty_taco4 жыл бұрын
This is a very good install videos bratha keep it up! 🤙
@南瘋搶4 жыл бұрын
Thank you for your video sharing, let me learn a lot of knowledge - Civic riders from China
@AznPanged4 жыл бұрын
Nice video. Going to do that soon preferably after winter. Where did you buy it in Canada?
@RicksGarage4 жыл бұрын
Thank you for your comment! I ordered it through Corey @ twostepperformance.com. They're based somewhere in the US
@tanikoko86462 жыл бұрын
Rick s do live in NEW YORK I LIKE YOUR WORK
@RicksGarage2 жыл бұрын
Thank you so much for the kind words! Tell your friends about the channel!
@MidevalGaming Жыл бұрын
Does upgrading the charge pipes and inner cooler require a tune? like if you were putting a cold air intake in? My inner cooler is in pretty bad shape and i need a replacement but i dont have a ktuner yet. Not trying to put a new intake and inner cooler on until im ready for a tune if its needed. Thanks in advance
@RicksGarage Жыл бұрын
Thanks for your question fantomfury! If you're just looking for a factory replacement for now, the charge piping and intercooler won't require a tune, but don't expect much in the way of additional power without one. You'll really notice the benefit later once you get a ktuner.
@MidevalGaming Жыл бұрын
@RicksGarage appreciate your reply, I just bought a ktuner, should be here Tuesday or Wednesday along with the intake and intercooler. I'm excited, not necessarily for more power but to actually be doing mods right for once😅🤣 in the past when I was younger I'd just slap intake exhaust on anything and call it good.
@ValkenDnB3 жыл бұрын
Are the outlet and inlet of that intercooler 3” for both sides? It looks massive
@RicksGarage3 жыл бұрын
I believe the piping size is 2.5" but you're right- it certainly is massive
@felixcruzmontes1874 жыл бұрын
awesome project, I have a 10th gen as well but haven't done any MODs to it yet... I am making a list of things to do when the time comes and so far what you have done has been everything I've been considering, my main goal with the car is to make it as light as possible but keeping the daily use of it...but i was wondering what made you go with the PRL when we have many others out on the market?
@RicksGarage4 жыл бұрын
Hi Felix - thanks for your comment! At the time of purchase, there were a few less intercooler kits available - I was waiting for the 27Won offering but it wasn't ready yet. I ended up with the v1 PRL cooler (the v2 has built-in diverters) because IIRC, the charge piping was the largest diameter available. Currently I think the toss-up would be between the v2 PRL and the 27Won kits.
@LucasEHonda4 жыл бұрын
Was wondering can i run this Intercooler on a Stock Tune? Will it affect SMOG?
@RicksGarage4 жыл бұрын
Hi Lucas - thanks for your question! According to PRL, this intercooler can be run on a stock tune. I'm not sure about local emissions (Cali?) I'd double check with PRL directly.
@jillroyceRJ4 жыл бұрын
installed mine today hooe you have a result on how many gains did it get on hp thanks
@LuisLopez-de4hv4 жыл бұрын
Hey thinking about getting this kit how do feel about it months after?
@RicksGarage4 жыл бұрын
Loving it - on the dyno, it made a huge difference in dropping temps. Only regret was timing - shortly after buying this kit, Prl released their v2 which has billet end caps and diverters
@LucasEHonda4 жыл бұрын
Was curious, by increasing the size of the intercooler, would it be blocking air flow to the radiator core? The immediate gain here is cooler intake air but will coolant temps increase due to less air flow to the radiator core?
@RicksGarage4 жыл бұрын
An excellent question Lucas! I would imagine that there would be a very small reduction in airflow to the rad as the new intercooler is slightly taller and the air would be slightly hotter once it reaches the radiator. So far I haven't seen any major differences on the temp gauge, but I'll be keeping a close eye on it once it hits the track. That being said, I think the airflow can probably be improved by driving faster! 😆
@stressypoo9113 жыл бұрын
Oh I can't do anything without the 10" sockets
@jeryjohn2 жыл бұрын
Isnt the factory piping 2"?
@RicksGarage2 жыл бұрын
Possibly the OD. The ID is a surprising diameter of only 1.57"!
@beebeegun164 жыл бұрын
How long did this take you to do?
@RicksGarage4 жыл бұрын
Hi Keldon - thank you for your question - the actual wrench time was pretty long because of the filming, but someone with a decent mechanical knowledge and some good hand tools can get this job done in an afternoon.
@beebeegun164 жыл бұрын
@@RicksGarage just got mine finished, took a very capable master tech about 3 and a half hours to do the intercooler and a PRL Cobra intake at the same time, probably would take him 2 and a half without the intake
@kothareddykrishna4 жыл бұрын
27won intercooler vs prl intercooler?
@RicksGarage4 жыл бұрын
Would've been the 27Won for sure but it was still under development when I was ready for an intercooler
@kothareddykrishna4 жыл бұрын
@@RicksGarage I am waiting for them to restock
@LynnDisclose2 жыл бұрын
Where can I get that intercooler from? And where would I go to get it installed?
@RicksGarage2 жыл бұрын
Hi Linn, You should be able to get the intercooler directly from PRL on their website - prlmotorsports.com/products/2016-honda-civic-1-5t-intercooler-upgrade-kit I would think most speed shops can help you out if you're not comfortable doing the install yourself. It's a great upgrade!
@LynnDisclose2 жыл бұрын
@@RicksGarage how much horsepower do I get from intercooler
@RicksGarage2 жыл бұрын
@@LynnDisclose prl advertises 9hp and 3 ft/lbs gain - I can't confirm this number since the intercooler was one of many upgrades
@LynnDisclose2 жыл бұрын
@@RicksGarage ok, for now I have a muffler / resonator delete, with 2.5 pipes. It feels like more power, Dual exhaust , a civic hatchback 10th gen. It has turbo charged engine
@LynnDisclose2 жыл бұрын
@@RicksGarage oh it originally had 175, 180 HP
@santiagopita18824 жыл бұрын
How did you get black intercooler?
@RicksGarage4 жыл бұрын
Thank you for your question! The black was achieved by a super-custom black spraybomb. Make sure you just dust a light coat of colour to avoid adding an insulating layer of paint.
@santiagopita18824 жыл бұрын
@@RicksGarage any way of making a video of that? or have any link on diy?
@RicksGarage4 жыл бұрын
@@santiagopita1882 unfortunately no link, but it's really easy - just follow the label directions but hold the can a bit farther away so the colour mists on as opposed to to being hosed on heavy
@santiagopita18824 жыл бұрын
@@RicksGarage NP, makes sense, thx for the quick response, subbed.
@andrewcampos84454 жыл бұрын
Will this make my 10th gen still reliable and can I use it with no tune?