Pro Tools Basics: Low Latency Monitoring

  Рет қаралды 17,188

Cato Zane

Cato Zane

Күн бұрын

Пікірлер: 43
@landcow5694
@landcow5694 Жыл бұрын
Hi thank you! looking for this for ages for an assignment straight to the point showed what needed to be done. It's very frustrating having to watch a video for 15 minutes that doesn't show what you need this was straight to the point. Very well presented!
@CatoNoise
@CatoNoise Жыл бұрын
Thanks! I'm glad you liked it - thanks for hanging out!
@MrManumendes
@MrManumendes 2 жыл бұрын
Great Video. One little hint, you can avoid Pro Tools bypassing PlugIns and Send while Low Latency Monitoring is running by setting the hook under Prefs > Mixing > "Allow Sends to persist during LLM"
@CatoNoise
@CatoNoise 2 жыл бұрын
Oh, nice! Thanks so much! 🎉
@SilentDeezy
@SilentDeezy 2 жыл бұрын
thanks boss!
@officialyoungpop
@officialyoungpop Жыл бұрын
My vocals sounds clear now , thanks 🙏
@gammon2004
@gammon2004 10 ай бұрын
Thanks for this tip! Trying to do this exact thing is the reason I was searching for LLM in the first place
@kernjames
@kernjames 7 ай бұрын
You are very easy to understand. Thanks for putting this video up.
@andrewpalmer7794
@andrewpalmer7794 Жыл бұрын
Wish I'd seen this video before, it would have saved me a lot of trouble. I even use a one sided headphone now just to hear myself unmonitored against the backing track. Interesting result!
@CatoNoise
@CatoNoise Жыл бұрын
You use a one sided headphone? I know a lot of artists do that, but I'd be careful with the loudness differential between your two ears, because if it's a lot, it can be damaging to your hearing. That's what I've been taught at any rate.
@andrewpalmer7794
@andrewpalmer7794 Жыл бұрын
Thanks for the warning, but I generally use it for my voice or violin; two instruments where good monitoring is essential for intonation. @@CatoNoise
@luhungnuraga
@luhungnuraga 2 жыл бұрын
I was upgraded to pro tools studio 2022.7 from pro tools 12. I use aux track for some fx. On pro tools 12 it works great wirh aux tracks, there is no "delay" effect when recording, there's no need to mute the track. But, in this pro tools 2022, the "delay" is exist again. I've tried all the setting that use in pro tools 12, nothing works. And then I find out the cause is the aux track. When I make it innactive, it works great without "delay", but when the aux track is active, I got the delay effect when I recording, so I have mute track while recording. Any suggestion? I use aux track for expander/gate and noise reduction.
@jameskeenatch3726
@jameskeenatch3726 Жыл бұрын
Protools screwed everything in the new versions. So we would all have to buy hd version it's marketing bs computers are so fast now they got to a point about 2013 we're I had zero latency on my Mac with many heavy plugins bussed no problem now I have new top of the line hear a and pt version and we're back to 2002 latency issues. Straight bs avid knows what there doing it's not our computers or a setting it's on purpose ...I can guerentee no one that has pt version released in last 5 years has been able to track with zero latency and all plugins active ...but we used to be able to ...
@leerbechmorten
@leerbechmorten 11 ай бұрын
Thank You for teaching videos.
@jamescave7102
@jamescave7102 2 жыл бұрын
Great video always !
@Scotanthony1
@Scotanthony1 5 ай бұрын
When I enable low latency monitoring, I cannot hear the audio on the track coming through my monitors or headphones. But when I turn it off, I can hear it just fine. Is there a setting that remedies this problem, so that I can hear my audio while in low latency monitoring mode to record?
@daleclyne6057
@daleclyne6057 2 жыл бұрын
Thanks Cato. That was a helpful video
@josuebeaucage4294
@josuebeaucage4294 2 жыл бұрын
Hey thanks for the video ! did you ever try recording with low latency mode AND using a click track at the same time ? on playback, the recording is playing before the click....any idea ?
@jamescave7102
@jamescave7102 2 жыл бұрын
Great video always
@aven-1989
@aven-1989 Жыл бұрын
hi, I would like to know if there is low latency monitoring mode on pro tools intro because I haven't seen this option, maybe it's a limitation? In your opinion on the pro tools artist version is there this option? THANKS
@TheHollermann
@TheHollermann Жыл бұрын
Enabling Low Latency Monitoring just did not disable monitoring from Pro Tools. If you were sure about that, there might be some other settings that allowed this to you. I could not figure out just yet.
@zakaroonetwork777
@zakaroonetwork777 9 ай бұрын
Are you using Apollo Console?
@torilena2067
@torilena2067 2 жыл бұрын
Really helpful! I wish I had watched this months ago - when my plugins on my mix bus were stuck in bypass?!
@CatoNoise
@CatoNoise 2 жыл бұрын
I'm sorry I didn't make it sooner! Haha, thanks for the video suggestion idea though! #bestBookClubEvar
@JoseGomez-vn2zz
@JoseGomez-vn2zz 2 жыл бұрын
I just bought an Apollo Twin, and it's been a bit frustating because im used to tracking with compressor ect already, and cannot hear nothing from PT plugins because all the sound I hear comes from the console app.
@MrManumendes
@MrManumendes 2 жыл бұрын
Just use the PlugIns from UA inside Console while Tracking. You can print them, or just use for Monitoring
@CatoNoise
@CatoNoise 2 жыл бұрын
Yeah, that's what I do sometimes: just put some plugins on console while tracking. I'll sometimes raise the levels with the fader in console on the track I'm recording, and then turn down my PT levels to get things sitting nicely in the control room for the tracking phase.
@mikeloosen53
@mikeloosen53 2 жыл бұрын
Ive been using UA Apollo/council and it works great in conjunction with low latency while recording into pt. However when im tracking, it seems as thou no matter what settings i use, if i do not unable the record button in pt when i preview what ive just recorded or aid in doing a punch in, it has some wierd latency thang goin on. As soon as the record button is turned off its fine. The only way ive found to get around it, is to de activate almost all plugins and then the problem seems to go away.
@CatoNoise
@CatoNoise 2 жыл бұрын
Yeah, that's why I monitor through Console while recording with my Apollo. There's some latency coming in with live input, so what I do is listen through Console entirely, and then after recording, when listening back, I mute console and listen through PT.
@jayrunproductionsllc9861
@jayrunproductionsllc9861 Жыл бұрын
@@CatoNoise mute the record track in console and listen through your Daw
@CatoNoise
@CatoNoise Жыл бұрын
@jayrunproductionsllc9861 last time I checked it doesn't sync properly when I do that. Sometimes it gets close, but not as good as monitoring through console.
@jasonhebert1656
@jasonhebert1656 Жыл бұрын
I don't have that option in options.
@geofflee6295
@geofflee6295 2 жыл бұрын
Don't forget there's an option to leave sends active during LLM. This means that the talent can still get some reverb etc from Pro Tools.
@CatoNoise
@CatoNoise Жыл бұрын
Yeah, 100%!
@notoriousmigo_
@notoriousmigo_ Жыл бұрын
How do you do this?
@Biakrumsang
@Biakrumsang 3 ай бұрын
You save my life
@DeonJefferson-ks3yv
@DeonJefferson-ks3yv Жыл бұрын
You’re a lifesaver
@swarmusic2982
@swarmusic2982 2 жыл бұрын
Very nice 🙂🙏🎉
@BoxRecords
@BoxRecords Жыл бұрын
Yeah ... send the track you wanna record to to a bus where u have plugins on .. then throw away protools cos there is no way you can deactivate input monitoring or get rid of latency.
@CatoNoise
@CatoNoise Жыл бұрын
lol
@dwaipayandattaroy9801
@dwaipayandattaroy9801 2 жыл бұрын
people
@CatoNoise
@CatoNoise 2 жыл бұрын
facts.
@rewindrecords3507
@rewindrecords3507 7 ай бұрын
So there's like this button, you click it and the latency goes away which is, like what computer nerds call delay or something. So like my video k bye
Pro Tools Basics: Equal Power vs Equal Gain
5:27
Cato Zane
Рет қаралды 2 М.
Pro Tools Basics: Delay Compensation
10:38
Cato Zane
Рет қаралды 19 М.
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Pro Tools Answers #55 | Latency and Pro Tools (1/2)
21:22
Pro Tools Answers
Рет қаралды 3,3 М.
STOP USING BOUNCE MIX IN PRO TOOLS! (How To Print a Mix in Pro Tools)
10:31
Composer Daniel Willett
Рет қаралды 63 М.
6 Pro Tools Tips That Will Make You Love Life Again
19:04
Andrew Masters
Рет қаралды 73 М.
Using Playlists in Pro Tools [Quick Keys, Shortcuts, and Workflows]
10:26
Top 9 Pro Tools Tips and Hacks
28:24
Wayne.wav
Рет қаралды 31 М.
How to Automate Anything In Pro Tools | Using Automation
16:48
The Secret to PRO Vocals (Layering)
10:04
Alex Rome
Рет қаралды 2,1 МЛН
Pro Tools Latency - What is it? and how do you manage it?
10:51
Pro Tools Services
Рет қаралды 4,6 М.
How to Use the Pro Tools Master Fader | The RIGHT Way!
12:15
Wayne.wav
Рет қаралды 107 М.