Problematic Pipes!! // Utility Room Renovation

Let's get those handmade kitchen cabinets made in a previous video fitted and installed in to the utility room!
Video about making the kitchen cabinets (part 1): • Why Build Kitchen Cabi...
Part 3 - Worktops and Backsplash: • DIY Worktops & Backspl...
Shelf Pins amzn.to/441P8XR (Amazon UK) geni.us/ncS9Z (Amazon Worldwide)
Cabinet Legs amzn.to/43SMK5l (Amazon UK) geni.us/4t65404 (Amazon Worldwide)
Overlay Hinges amzn.to/41qESGz (Amazon UK) geni.us/kUmJz (Amazon Worldwide)
🔴My channel is supported by Milwaukee🔴
Check out their full range here: uk.milwaukeetool.eu/?...
Tools used in this video:
Lazer Level uk.milwaukeetool.eu/en-gb/30-...
Spirit Level uk.milwaukeetool.eu/en-gb/red...
M18 Jigsaw uk.milwaukeetool.eu/en-gb/m18...
M18 Multitool uk.milwaukeetool.eu/en-gb/m18...
M18 SDS Drill uk.milwaukeetool.eu/en-gb/m18...
M18 Drill & Driver uk.milwaukeetool.eu/en-gb/m18...
M18 Plunge Saw uk.milwaukeetool.eu/en-gb/m18...
#diy #kitchen #home
Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications
🔨 MY TOOLS 🔨
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn from qualifying purchases.
UK affiliate store: www.amazon.co.uk/shop/ragnbon...
US affiliate store: www.amazon.com/shop/ragnboneb...
🤝 HELP SUPPORT THE CHANNEL 🤝
Support with KZbin channel membership: / @ragnbonebrown
Support with Patreon: / ragnbonebrown
Support with PayPal paypal.me/ragnbonebrown
Shop With Amazon using my affiliate link: geni.us/iWD3K
💰 SHOP 💰
Etsy: www.etsy.com/uk/shop/KeithBro...
teespring.com/stores/rag-n-bo...
🎧 WORKSHOP BANTER PODCAST 🎧
/ workshopbanter
Also available on Spotify, Apple, Google and most other podcast platforms
🔗 LINKS: 🔗
Website: www.ragnbonebrown.com
Facebook: / ragnbonebrown
Instagram: @ragnbonebrown
Twitter: / ragnbonebrown
Email: [e-mail]
Second KZbin Channel (non woodwork videos): / keefykeef

[@lorimecikalski3079]

Your kitty makes an astute apprentice. He sure does like being near you!

[@alexag1997]

Love this book! kzbin.infoUgkxpCNxqmAkyjN6NPx1fyB7QiEFWyO5mUWL it is simply one-of-a-kind! I really love it, because karah explained all tools required to have the job done, not mentioning the fabulous diy pallets ideas. I'm pretty sure this will be a fresh start in my new endeavour. Amazon was great, they delivered on time. Thank you!

[@LadyGecko]

Suggestion? For the cabinet where you had to cut out for the pipes, I would make a panel to put inside the cabinet to hide them. You lose a little depth in the cabinet, but you also don't have to worry about anything getting pushed into the hole and dropping behind.

[@bobartex1812]

I was thinking that too

[@MrChrissammons]

Me as well. Had to do something similar I'm my own kitchen,

[@alieverett5895]

same! you'll loose small things in the gaps

[@rodgerq]

This is why normal kitchen cabinets come with a service gap at the rear.

[@jscook54]

We have a cat that looks like Mickey and takes his supervisory duties seriously just like your lovely Mick. What a nice upgrade you are doing here.

[@veronicawhite398]

And the star of today's show? Well done, Mickie, well done! And Dad! 😉👏

[@tayred81]

Cool cat, Mickey right. He is the Boss on your job sight

[@dukbud6065]

Cat is the boss like always

[@PabloBD]

Great to see Mickie helping with this project!! Looking forward to the third part!

[@danielwozniak8411]

He looks a cheeky scamp.

[@bigpete4227]

You should be rightly proud of that Keith.

[@geoffreycoan]

Nice job Keith, I like the tip about raising the plinth slightly with screws; never seen that one before

[@curiousmike1044]

Mickey is becoming a KZbin star. Love it.

[@SchoRiginal]

Neat trick putting the screw in the toekick panel! Thx for that and the glimpses into Mickies workday 👍

[@tjacksonwoodworker3726]

Very nice… your wife is a lucky lady to have a craftsman like you.

[@Danme1987]

Tip with the cupboard legs. They should be supporting the side panels as they bear the weight of the surfaces and everything that may be on the surface. That's why they have a tab on them. That part overlaps the sides downwards force

[@LISA75_]

So glad you were given adequate supervision through the entirety of this build, so often the foreman/boss are only there to moan/whine when you haven't done something right or given them any treats , good to see mike runs a tight ship lol .

[@saint-miscreant]

love that you take the time to do all those little touches that take the project from utilitarian to more custom! i do think a back panel on that corner cabinet is in order though. the little screws as feet trick is genius

[@andyc972]

That came out looking really well Keith, I'm glad you enjoyed the process too ! I thought you were mad when you started cutting so much away of the corner cabinet, but you achieved it very neatly and it didn't appear to impact on it's structural integrity, so a worthwhile result ! You strike just the right balance in giving information about your thought processes and the editing for the actual process, such as handle placement, all good stuff, thanks !

[@gazgough9264]

nice to see you being supervised during the process 😂 Really tidy job cutting around all those pipes!

[@mandyleeson1]

Great progress, Keith, looking forward to the bench top episode now. Love the tip of putting a couple of screws in the bottom of the kick boards to help prevent moisture damage.... and Mickie is fast becoming the foreman....🐈‍⬛

[@craigwilliams6734]

Really enjoyed that video Keith! That laser level is a real life saver!

[@katherinecarroll3706]

I see your four legged supervisor🐱 is as helpful as my four legged supervisor 🐶.

[@prezzeruk4054]

I love french cleats!! Very handy! Got materials for my bin cupboard project!! Start it next tuesday!!

[@paulprescott7913]

Great job, nice to see that your been supervised in the correct manner

[@negotiableaffections]

From visual choas to a soothing vista - gonna be great whan its finished!

[@MCsCreations]

Beautiful work, Keith! Really well done! 😃 The only idea I had that I didn't see others mentioning would be a counter top over the 2 cabinets and the washer machine. Anyway, stay safe there with your family! 🖖😊

[@juadonna]

He mentions at the end the countertop will be part of the next installment.

[@MrJlucRober]

That's really a cat's job ! I really don't want to be depreciative ;)

[@ianvicedomini2648]

Looking good Keith. Pipes are always an eyesore and awkward to get round but you tackled it well mate 👍🏽 😉 👏

[@erictheviking672]

Excellent job, looks fantastic. Mickey is s lovely cat too, really friendly. Cheers.

[@M4l3k0]

Looks fantastic!!

[@beirtipol]

Would suggest putting some foam packing material around the washing machine to squeeze it tight against the cabinets. It will drastically reduce noise and vibration.

[@christopherinteriors6521]

Lovely job Keith! After making and fitting kitchens for clients, I always give them a chopping board, finished with the KB food safe oil-wax 😉

[@markhaynes6410]

Problem solving as you go and getting a result you like, always makes for an enjoyable project. Everyday is a school day ☺️

[@awantamta]

That looks really, really good and expertly fitted.

[@IEnjoyCreatingVideos]

Nice work on the kitchen Keith! Thanks for sharing the video with us!👍💖😎JP

[@lincolndickerson1293]

I really like how you sortof “no big deal” cutting up the carcass you just made. I mean it wouldn’t have fit if you didn’t but I sometimes get arrached to a build..,

[@Vanjonsorz]

Bless Mickey for helping you. My cat is the same

[@bluecurlygirl]

It's looking so good. And Mickey seems to be enjoying it too! Love how cats will sit around all day watching others work but won't lift a paw to help. Lazy brats.

[@nathanlucas6465]

If you're going to be doing any more cabinet handles like that, hafele do an adjustable jig for it. Only a few quid but mega useful

[@gerrym4377]

Top work, not many people have a turd flume inside their kitchen cabinets 😂

[@alastairmackay4589]

Precise work! Want to see it finished now!

[@mags8014]

Looking good! And it must have been useful to have the project manager overseeing everything. Your videos are always interesting; thank you.

[@kbcarpentryservices]

I’m sure you realised but the end panels need to be 22mm overhang to sit nicely with these hinges

[@TR-rz1xt]

22 metres?????!!!!!! 😲🤣

[@frankslittleworkshop]

😃 Nice job Keith. Looking forward to the worktop video 😃👍

[@davidsmith3334]

Hi Keith nice job, one thing that concerned me was the positioning of the cable for the wall sockets. I've always been told that electrical cables should always be vertical if hidden behind plaster never horizontal or at any angle.

[@pteddie6965]

It's really coming together, Keith. The cabinets look nice and the design of the room is outstanding. I am enjoying the journey and I'm looking forward to the back splash, the counter top and the new floor. Thanks for sharing this video with us.

[@peterbouchard103]

Well done 👍👌.. Lovely cat 😻🐱

[@avroncotton]

Well done Kieth! Top Job!

[@cobberpete1]

It's going Great. Love the tip about the screws on the soffet to keep clear of the wet floor. That is one laid back cat. 🐱

[@mathquir190]

Yep ! Welcome to the cabinet workers world. Everything seems fine on drawings but once you there you got to make everything fit to the level and cut everywhere to makes it happen.

[@MichaelCarroll]

Love the scribing! Excellent work, Keith!

[@pascalbriand9987]

Great job! But why do you have a microwave in the laundry? To dry socks perhaps?

[@sandman2651]

Glad to see the cat was there to keep a eye on you,its all coming along nicely, on a recent vid you did about your axminster saw you said your fence was pulling out to the right when applying the fence clamp , you said you added a smmall shim but did you remove the nylon strip or did you keep it on as well?

[@cazee100]

Lovely job. Looking forward to the next video, stay safe x

[@macpablo1169]

Tom Silva's compass at 5.43

[@bitzbox]

The cabinets looks great! The space looks so much better already

[@thenullco]

Love the catprentice.

[@thetallcarpenter]

Great video Keith👍Can't beat the satisfaction you get from making, and fitting your own furniture👌Cheers 🇬🇧 🇬🇧

[@jandavis1523]

Looks great and is a utility room I would be proud to call ‘mine’!

[@martindunford2291]

just luv that cat !!!

[@paultay23]

Great job Keith.

[@MagicianMan]

Might have been easier to either build the cabinets with the back panel rebated into the carcass like they usually are and/or you could have used some of those Space-Plug's

[@Christopher_T_Paul]

I think you should have customised that one carcass to fit the pipes, rather than chopping it about afterwards?

[@cuboid5]

Looks great

[@adeh503]

Looks awesome Keith 👌

[@Jako-fh8zg]

Brilliant, looks great. Love the look of the cabinets too, nice colours 👍👍👍👍👍👍👍

[@johnthresher259]

Nice job Keith!

[@StrawbyteWorkshop]

I've a project along those lines in the works. It has its own challenges but nothing like your problematic pipework.

[@melissahislop5716]

Makes me want to get a multi tool again, looks awfully useful. Also loved getting a glimpse of a cat bed you made years ago.

[@mrnormski9005]

Really enjoyed the solutions to the pipe problems & better you nicked that compass from from school 😅. Just a query on the clearance on the microwave oven compartment as it doesn't look integrated, I've just got new microwave oven that stated 30cm clearance on from the top.

[@32dras]

Sorry Keith, those are nice cabinets, but Mickey was star of this video 😅 🐈‍⬛🐾

[@user-ni9gr1qn5t]

Hi Keith, that's looking good. Keep up the good work, can't wait for the next video.

[@tomasrdms2707]

Infill pieces could be screwed right beside where hinges is going in

[@simonlunt353]

I still say you should have made these units out of MFC white is the cheapest and edge them no painting? and your end panels we always make them 22mm bigger so you can adjust your doors and l agree about putting a panel at the back of the units so you don’t see all of the pipes if you screw it then you can get at when ever l always use French cleats we make are own on the spindle great job see you soon 👍

[@darrenpaulgreen]

Lovely job Keith. Tricky as I can appreciate you’re trying to maximise space, but I tend to create a void ache back of any kitchen cabinets (like the big suppliers) to allow for pipes etc. Makes fixing to the wall easier too, though largely I’ve moved over to Spaceplugs now.

[@dannybaker2763]

Looking really good so far, Keith. Can't wait to see the finished article.

[@nathanlucas6465]

How did you manage to resist pulling all those pipes out and replacing them so they take up less space?

[@dan.w.hoover2556]

Another great project!

[@cloth0077]

Great stuff!!

[@MigleschienHysteria]

Looks great Keith!

[@tdimccullough]

instead of painting the bottom of the toe kick board spread some silicon on the edge and let it dry before installing ant this will stop water damage

[@Pete.Ty1]

👍👍👍Thanks.

[@michaelwillson6847]

Looking good kieth your like me i like things morroring each other. Also good to see yhe foreman is alwsys yhere checkijh everything is going to plan btw hes also figuring oht if he can get under or behind them. 🏴󠁧󠁢󠁳󠁣󠁴󠁿😀👍

[@surfrico]

Love it

[@kaizen_5091]

It's great taking in tips, just watching build/install processes like this one. Everyone should have a cat apprentice as well, lol.

[@AC-gm6bq]

Love your channel....

[@JohnColgan.]

I see your cat was giving close inspection of your working habits. Maybe he learned a few tricks for getting into back of your other cabinet!!

[@terristroh3965]

Mickey: I helped. Keith: Um… not exactly

[@user-te1le7ck6b]

Keith makes it look to easy , thanks mate now wife’s will demand this level of DIY from all husbands. Question if floor isn’t level does the laser still maintain accuracy? Ps mickey approved work 😂

[@garvielloken3929]

NOOICE!

[@RagnBoneBrown]

Video about making the kitchen cabinets (part 1): kzbin.info/www/bejne/e6qwineXYr2sbqs Part 3 - Worktops and Backsplash: Coming Soon - Early access available now via Patreon/Channel Membership) Shelf Pins amzn.to/441P8XR (Amazon UK) geni.us/ncS9Z (Amazon Worldwide) Cabinet Legs amzn.to/43SMK5l (Amazon UK) geni.us/4t65404 (Amazon Worldwide) Overlay Hinges amzn.to/41qESGz (Amazon UK) geni.us/kUmJz (Amazon Worldwide) 🔨 MY TOOLS 🔨 For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn a small commission from qualifying purchases UK affiliate store: www.amazon.co.uk/shop/ragnbonebrown US affiliate store: www.amazon.com/shop/ragnbonebrown 🤝 HELP SUPPORT THE CHANNEL 🤝 Support with KZbin channel membership: kzbin.info/door/VyE_6jEtVZGmYGXtUOL5FQjoin Support with Patreon: www.patreon.com/ragnbonebrown Support with PayPal paypal.me/ragnbonebrown Shop With Amazon using my affiliate link: geni.us/iWD3K 💰 SHOP 💰 Etsy: www.etsy.com/uk/shop/KeithBrownMaker teespring.com/stores/rag-n-bone-brown-merch 🎧 WORKSHOP BANTER PODCAST 🎧 kzbin.info Also available on Spotify, Apple, Google and most other podcast platforms 🔗 LINKS: 🔗 Website: www.ragnbonebrown.com Facebook: facebook.com/ragnbonebrown Instagram: @ragnbonebrown Twitter: twitter.com/ragnbonebrown Email: [e-mail] Second KZbin Channel (non woodwork videos): kzbin.info

[@JoeGP]

are you gonna tile around the cabinets? wouldn't you normally tile the floor first ?

[@RagnBoneBrown]

kzbin.info/www/bejne/mGqkYqR4brGAgqM

[@shedlife1783]

Kitchen cabinets have service voids for this very reason. I’m sure many people will point this out!

[@TheOriginal_BigMac]

Tweet tweet tweet 😂😂😂😂

[@cedarstuff]

Should have measured first and made a shallower cabinet.

[@Nebx1989]

Err... Usually a big fan, but I just don't think the new cabinets and layout look any better than the old stuff.

[@TheOriginal_BigMac]

That hairy young apprentice is really paying attention. A promising sign