Excellent content. Thank you for laying it out in a clear, visual and easy to absorb manner. Very nice. More like this please.
@learnandapply2 жыл бұрын
Thank you so much for your valuable comments and appreciation 🙏☺
@rotonaiobuna-vj5hm5 ай бұрын
Wow. I understand it more better this time
@learnandapply5 ай бұрын
Thank you so much for your valuable comments and appreciation! 🙏☺️
@harshitgusain7206 ай бұрын
Best 6 Sigma faculty in you tube Sir is your lecture sufficient to crack the ASQ green belt exam ?
@learnandapply6 ай бұрын
Thank you for your valuable comments and appreciation! 🙏☺️ For complete Green Belt training and guidance on ASQ Examination, please visit vijaysabale.co/lssgb
@andyc2800819734 жыл бұрын
Very clearly explained - for some reason I had a block on understanding CP and CPK. This explained it all very well and more.
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments and appreciation!
@ProfJohnStats2 жыл бұрын
SUPER JOB!!!! Congratulations!!!!
@learnandapply2 жыл бұрын
Thank you so much for your valuable comments and appreciation 🙏😊
@Deepak_good4 ай бұрын
Thank you 🙏🙏👍 sir
@learnandapply4 ай бұрын
You're welcome! Thank you for your valuable comments and appreciation! 🙏☺️
@raghadsr8385 Жыл бұрын
Thank you very much 😊❤
@learnandapply Жыл бұрын
You're welcome! Thank you so much for your valuable comments and appreciation! 🙏☺️
@deniseiglesias56893 жыл бұрын
Thank you for sharing.
@learnandapply3 жыл бұрын
Your welcome and thank you so much for your valuable comments!
@karanbhansali63713 жыл бұрын
How do you do a Process Capability Study for one sided specifications limits (example: measurement of flatness tolerance on a part)?
@learnandapply3 жыл бұрын
The procedure is the same. Just to mention only one side specification limits in the options during performing it.
@dineshlakshitha12593 жыл бұрын
supper explanation
@learnandapply3 жыл бұрын
Thank you so much Dinesh for your valuable comments 🙏☺
@marknikhazy884310 ай бұрын
Can you please explain me why do you calculate the Cpl and Cpu from the "Target for the process" (5:30) instead of the mean? Also can you please explain what Short-Term Standard Deviation is?
@learnandapply10 ай бұрын
These are the formulae for Cpl and Cpu. Short-term standard deviation is considering only common cause variation in the process, calculated by using formula Rbar/d2.
@michaela49465 жыл бұрын
Well done. Excellent presentation.
@learnandapply5 жыл бұрын
Thank you for your valuable comments...
@ParwaizMP5 жыл бұрын
Sir please tell which are the common test used on process cabality and hypothesis....
@learnandapply5 жыл бұрын
Normal Capability Analysis and Normal Capability Sixpack are commonly used in Capability Analysis. Whereas, in Hypothesis test t test are commonly used. But, please remember, depending on scenario, you have to use correct type of analysis or test..
@rahulekhe35144 жыл бұрын
Good
@learnandapply4 жыл бұрын
Thank you for your valuable comments..
@longling34703 жыл бұрын
If the process is out of control, how to do the capability?
@learnandapply3 жыл бұрын
If the process is out of control, then whatever capability you are going to calculate is not correct and not consistent. Actually, there is no meaning of calculating capability, if the process is out of control.
@shafiqueabdulrazak2594 жыл бұрын
any reason why we go for 6sigma rather than lower or higher?
@learnandapply4 жыл бұрын
Thank you for your valuable question. This is because it is an optimized level considering cost, efforts, and results? Please check out my detailed video on this topic: kzbin.info/www/bejne/nX_No2mue9Fmoa8
@gowthammurali12244 жыл бұрын
Hi sir, CPm Value for good process
@learnandapply2 жыл бұрын
Cpm value more than 1.33 is a good value.
@ramsantosh94853 жыл бұрын
What if the data I had does not follow normal distribution ?
@learnandapply3 жыл бұрын
In that case, you need to identify which distribution fits your data by using 'Individual Distribution Identification'. Once you found out the distribution in your data, please use the nonnormal distribution option and select that distribution in the options. You can also go for the transformation of data to fit the normal distribution.
@ramsantosh94853 жыл бұрын
@@learnandapply Thank you so much!
@learnandapply3 жыл бұрын
Your welcome! We are having detailed videos on each of these topics in this channel as well!
@stuartcooper14163 жыл бұрын
If CPK is one sided and the process works, I should move the mean?
@learnandapply3 жыл бұрын
Can you please elaborate more on it?
@stuartcooper14163 жыл бұрын
Cpk is very much bottom of the control limit but the process works
@wieslawablumowska67842 жыл бұрын
「あなたの動画はとても良いですし、メッセージがた
@learnandapply2 жыл бұрын
Thank you so much for your valuable comments and appreciation 😊🙏
@eeskayaar81923 жыл бұрын
🌹🌽🌺🌷💐🙏🙏🙏
@learnandapply3 жыл бұрын
Thank you so much for your valuable comments!🙏😊
@haseemshaikh514 жыл бұрын
Amazing video sir and presentation is also too Good 👍👍👍 keep it up
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments and appreciation!!
@luigi88953 Жыл бұрын
Hi I have a question. Let's say that management wants to bring down % defective from 5% to 2% to improve the process and increase customer satisfaction. Can we calculate cpk in this case on the np chart, considering that management would set a maximum tolerance limit?
@learnandapply Жыл бұрын
Yes, you can. But the monitoring of it won't be effective. For Process Performance and Process Capability, you need all indices along with a graphical representation. You can either have a system to calculate Process Performance regularly or start using a P chart to monitor proportion defectives.
@luigi88953 Жыл бұрын
@@learnandapply thank you. If we plot a p chart and include a maximum spec of 2% we should be good to go with also calculating the capability though. Is it not correct?
@learnandapply Жыл бұрын
Ok, how can you calculate capability from control charts? Can you please elaborate? The intent of control charts is to control your process by identifying and elimination special causes.
@luigi88953 Жыл бұрын
@@learnandapply control charts and capability have different purpose, but technically we need control chart to calculate cpk. In cpk formula we have mean and standard deviation. They are both contained in control chart as it gives us all the info about the process. We often see specs as coming from external customer, but technically internal customer(departments, management) may give some spec to things like cycle time, procurement time, ppm. Statistically calculating capability on these things would make sense, although pratically we don't see that often. I like receiving feedback from valuable channels like yours, that's why I wrote.
@learnandapply Жыл бұрын
Yes, we need Rbar/d2 for calculating short-term capability. The question was different. I appreciate your thought process and active involvement. Thank you so much for being a part of LEARN & APPLY.
@prashantjoshi69033 жыл бұрын
How to calculate Cp Cpk for one side specification?
@learnandapply3 жыл бұрын
Cp won't be there, but use the formula for Cpk based on the specification limit (Higher or Lower). E.g. If you had specified the USL, then use the Cpk Upper formula.
@alokalliyanage70229 ай бұрын
Excellent explanation ❤
@learnandapply9 ай бұрын
Thank you for your valuable comments and appreciation! 🙏☺️
@GaneshYadav-np8ql9 ай бұрын
Excellant
@learnandapply9 ай бұрын
Thank you so much for your valuable comments and appreciation! ☺️🙏