from now on, I will search Learn and apply when I am looking for a video lesson. you are really good at this :)
@learnandapply3 жыл бұрын
That's great! Thank you so much for your most valuable comments and appreciation!😊🙏
@vijaydave2502 жыл бұрын
Easily understandable thanks
@learnandapply2 жыл бұрын
Thank you so much for your valuable comments and appreciation ☺🙏
@abhishreshtha6 жыл бұрын
I am your fan. Perfect explanation as required. Now I can easily remember the 8 rules of Nelson.. thanks a ton.
@learnandapply6 жыл бұрын
+Abhijeet Kulshreshtha Thank you so much for your valuable comments. It values for me a lot.
@frrnxh4 жыл бұрын
I'm actually searching for normality assumption in control chart, but this video does actually help me to understand more about control chart.
@learnandapply4 жыл бұрын
Thank you for your valuable comments. It's there @7:57, still if you want something else, can you please elaborate so that I can help you?
@frrnxh4 жыл бұрын
@@learnandapply would you mind explaining about robust control chart?
@vipinkumar-mf3pk4 жыл бұрын
A very big thanks to you for clearing my doubt. Now i understood 8 rules of Nelson thanks to you.
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments..
@samarthgajjar52733 жыл бұрын
It was perfectly explained. Very good video helped me get a quick recall on control charts
@learnandapply3 жыл бұрын
Thank you so much for your valuable comments and appreciation!
@nagurlasanjeev58034 жыл бұрын
Very informative and useful to pharma industry.keep me updated.
@learnandapply4 жыл бұрын
Thank you for your valuable comments.
@iman1983ify4 жыл бұрын
You are great teacher, bravo
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments. Please share it with your friends and colleagues.
@mohammedsedki67013 жыл бұрын
Great job, thanks!
@learnandapply3 жыл бұрын
Thank you so much for your valuable comments and appreciation!
@TheEngineeringToolboxChannel6 жыл бұрын
I find it is common for people to incorrectly calculate standard deviation. I see a lot of videos that do not point out the difference between overall standard deviation and the estimated short term standard deviation (used for control charts) why the distinction is important. Because of this I think too many people are getting the impression that you just take the overall standard deviation of all the data points and use that to find control limits.
@manikandansankaranarayanan23034 жыл бұрын
This is really a useful message
@learnandapply4 жыл бұрын
Thank you so much sir for your valuable comments and appreciation 🙏🙏
@etr4205 жыл бұрын
This is a beautifully clear and concise explanation. Well done!
@learnandapply5 жыл бұрын
Thank you for your valuable comments...
@rauljimenez54855 жыл бұрын
Perfect and simple explanation of the concepts, thank you very much for this video!!
@learnandapply5 жыл бұрын
Thank you so much for your valuable comments.. Please share it with your friends and colleagues..
@kapileshdubey25974 жыл бұрын
Superb... I have seen your vedio just now for the first time. Found extremely informative and useful.. I hope you are still making such useful vedio...
@learnandapply4 жыл бұрын
Sure. Thank you so much for your valuable comments and appreciation!
@emelang4 жыл бұрын
Thank you teacher 💓
@learnandapply4 жыл бұрын
Thank you for your valuable and positive comments always 🙏🙏
@sureshramanujam74355 жыл бұрын
Nice and easy to understand
@learnandapply5 жыл бұрын
Thank you for your valuable comments. Please share it with your friends and colleagues..
@ashishtiwarijshl-stkmill56144 жыл бұрын
Thank You... Million Time
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments.
@ramjeevanrathore34584 жыл бұрын
Your video is so informative and knowledgeable. Thank you so much. Could you please tell all 8 rules are compulsory or first 4 rules are enough.
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments and appreciation! The First 4 rules are enough, but you can use anyone from the last 4 in addition to these first 4, depending on the process and reason for which you are going to use it.
@yaseentaha034 жыл бұрын
You are amazing! many thanks
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments.
@akashpatil85595 жыл бұрын
Excellent, brilliant
@learnandapply5 жыл бұрын
Thank you for your valuable comments...
@bowiecreative4 жыл бұрын
Awesome. Which control chart should be used to control how long it takes for employees to respond to a customer after then customer emails an employee for the first time?
@learnandapply4 жыл бұрын
Thank you for your valuable comments. Please use I-MR chart in this case.
@wvillegash7 жыл бұрын
Excellent, thanks
@learnandapply Жыл бұрын
Thank you for your valuable comments and appreciation! 🙏😊
@shereenturkistany64214 жыл бұрын
thanks!!
@learnandapply4 жыл бұрын
Thank you for your valuable comments..
@doantrinhnguyen57227 жыл бұрын
Thank you very much
@learnandapply Жыл бұрын
Thank you for your valuable comments and appreciation! 🙏😊
@atrayeesamal96436 жыл бұрын
The explanation of ctrled variation via the "dominant hand" example is bang on. If and when possible,a live industry example post a concept or any organization that has used the concepts that helped it in decision making process would be helpful Sir.
@learnandapply6 жыл бұрын
+Atrayee Samal Thank you so much for your valuable comments. Definitely I will try to give practical industrial examples in my future videos.
@nagurlasanjeev58034 жыл бұрын
Very informative, useful to pharma fellows. Keep me updated
@learnandapply4 жыл бұрын
Thank you so much for your valuable comments.
@VIJAYKUMAR-nz6lp5 жыл бұрын
NICE VIDIO THANKN U
@learnandapply5 жыл бұрын
Thank you for your valuable comments. Please share it with your friends and colleagues..
@sumitmitra7336 Жыл бұрын
In case of control charts C and Control chart P ,Control limits change with the number of items in the subgroup (subgroup size) ❖ Larger Subgroup - narrow control limits. Why ? ❖ Smaller Subgroup - wider control limits. Why ? Can you please explain . Thanks
@learnandapply Жыл бұрын
In case of Attribute Control Charts, the control limits are calculated based on their mean (u bar or p bar) and subgroup size. Please consider it as a combination of both.
@yvettecordero18135 жыл бұрын
Great thank you SO MUCH😀
@learnandapply5 жыл бұрын
Thank you for your valuable comments...
@dimitrz20003 жыл бұрын
Sorry not sure if I have asked this question on any of your other videos , But since Nelson's rules (especially 4 and beyond ) are based on Standard Deviation they are not applicable to Control Charts like C , NP , P etc which do not use UCL and LCL based on standard deviation values . would that be a correct statement ? By the way a very well explained video - thanks
@learnandapply3 жыл бұрын
Thank you for the valuable comments and appreciation! Yes, the statement is correct. For Variable control charts, to calculate the control limits we are using Mean and Standard Deviation (or Range). Steps 5 to 8 are used when an early warning is desired in the case of a variable control chart and that can be tested with the help of nos. of standard deviation. For the attribute control chart, the calculation of the control limits was based on Mean (Averages).
@dimitrz20003 жыл бұрын
@@learnandapply thanks for clarifying
@mazenalsakkaf6 жыл бұрын
Many thanks for such a great introduction. May I know if control chart is the same as run chart or not?
@learnandapply6 жыл бұрын
+Mazen Al-Sakkaf Thank you so much for your valuable comments. Run chart is the only graphical representation of data to know if any particular trend is there in the data, whereas Control chart is in much detailed helping to find out assignable cause immediately and correct it.
@mazenalsakkaf6 жыл бұрын
LEARN & APPLY Many thanks for your answer and time
@vaibhavbarge95437 жыл бұрын
Thanks sir.
@learnandapply Жыл бұрын
Thank you for your valuable comments and appreciation! 🙏😊
@masudahmed97816 жыл бұрын
Thanks a lot....how i will get D3 n D4 value plz explain
@learnandapply Жыл бұрын
You will get that from constant tables for Control Charts.
@kavitaraut26723 жыл бұрын
can I get the sample dataset or any sample pbix file for applying control chart?
@learnandapply3 жыл бұрын
Hi Kavita, you can go for the detailed course on SPC, where you will get entire details including data files for all control charts.
@gowthammurali12244 жыл бұрын
Sir , Please correct me if my understanding is wrong. Control chart generate UCL & and LCL based on data or sub group data which gives process variation from this we eliminate the error in process with repect to charactertics Cp and cpk are based on USL & LSL Which gives process variation with respect 2 target line Both method will provide normal distribution curve, am i right. Thank in advance.
@learnandapply4 жыл бұрын
Thank you for your valuable comments. The 1st part of your explanation is correct. But, the last sentence about normal distribution is not correct. You can calculate process capability for Non-normal process also.
@rajeshsoni5406 жыл бұрын
Is example of test 8(chart) correct? Please take a look. Thanks!!
@learnandapply6 жыл бұрын
Rajesh Soni Thank you Rajesh for your valuable comments. You are right. Explanation is correct, but graph need to change.
@tanishkkaim53696 жыл бұрын
How you did the editing work? The hand with pen??
@RamKumar-ps7hp5 жыл бұрын
How to use control chart for die control process. (Dimension will increase over the time)
@learnandapply5 жыл бұрын
Thank you for your valuable comments. If dimensions are varying in sizes, you can use proportion of them w.r.t. designed or expected dimensions at that instant and can plot it.
@RamKumar-ps7hp5 жыл бұрын
@@learnandapply thank you sir
@Salma-pv6xc3 жыл бұрын
Pls try to put eng sub in your videos As as a foreigner i can't catch up all the words correctly
@learnandapply3 жыл бұрын
Sure, thank you so much for your valuable suggestions!
@Salma-pv6xc3 жыл бұрын
I am so sorry for any misunderstanding I mean myself by the the word (foreigner) cuz my language is Arabic so i can't easily catch the whole video .sorry again @LEARN&APPlY
@learnandapply3 жыл бұрын
It's ok, I can understand. It's a genuine concern. I will add subtitles to the videos. Thank you once again for your valuable suggestion 😊
@learnandapply3 жыл бұрын
Added subtitles to this video.
@houssainalsinan72843 жыл бұрын
I truly admire the way you explain and deliver the information and knowledge to us. Is it possible if I had your whatsapp number or telegram or any source of contact, in case I have some questions. Thanks
@learnandapply3 жыл бұрын
Thank you for your valuable comments and appreciation! You can connect to the Facebook group named "LEARN & APPLY" for communication and Q&A.
@shankarramalingam93595 жыл бұрын
nice , simple and easy to understand....fine...
@learnandapply5 жыл бұрын
Thank you for your valuable comments. Please share it with your friends and colleagues.