Professional RC Hexacopter With Retractable Landing Gear

[@rochanroll]

I own this Hexacopter, so here's some info on it. Tarot 960, Wookong-M FC (it has up to 50 Waypoints) spinning 18 X 5.5 props Dslr Gimbal with Aerialpixels controller, running 2 5000 mah 6S batteries, it has a Sony camera for fpv with on screen display, on this video I had a full size Nikon and it could fly up to 11 minutes, now I'm using a Sony A6000 (much better quality video and stills) a lot lighter than the Nikon so I think I might get over 12 minutes of flying time. I have a Futaba 14MZ controlling the hexacopter and a Futaba 14SG controlling the Gimbal, the 14sg controls the pitch, pan and roll on the camera gimbal and also controls the start-stop video and stills. It has (2) 5.8 ghz video transmitters

[@ToolsAndI]

rochanroll Thank you for all the information, that is one very special piece of equipment. I am actually exploring to buy my first drone. I want something for filming but it doesn't have to be hi end. I am debating between the DJI Inspire and the Yuneec Q500. It will be my first drone, I have never flown one but I am an experienced sport plane pilot.

[@ToolsAndI]

rochanroll I updated the video's description with the information you shared. Thank you.

[@rochanroll]

Hi Eric, send me your email and I can send you some screen shots of the set up Dan

[@dagothdr]

rochanroll Hi Dan. I have a set up like yours but I have some problems with the gains, could you help me with that? Thanks a lot for your time. Luis

[@dagothdr]

José Luis Soto By the way, my email is [e-mail] Thanks again.

[@rcbuildmaster6192]

18 inch propeller is supportable on tarot 690 ?

[@eyamnottier3411]

I have a pair of the Tarot retracts...trying to fit on DJI type 450 frame ...FC is the old reliable...CC3D....just cannot get them to function! Any tips?

[@MegaSamuelCarlos]

AMIGO, ESSE FRAME 690MM TAROT SUPORTA ÀS HÉLICES 1755 E AO LIGAR O DRONE ELAS NÃO FICAM SE TOCANDO?

[@ThirtyFourS]

I recognize that type of machine, and it is not uncommon - it is a Tarot 960 hexacopter, to which he has added Foxtechfpv retractable landing gear, stabilizing gimbal and DSLR camera, and it can be used for whatever purpose you want - hobby or professional. It is much more expensive than say a DJI Phantom with a GoPro, but each to his own. I built one and gladly share info to anybody that asks . . .

[@ToolsAndI]

ThirtyFourS The owner was actually a cool dude. I just didn't inquire any more information because there was a lot of people asking questions at the same time. Yours looks a little different but thanks for the info.

[@michealwithington]

What is the flight time and which batteries are you using? lastly this is using the Tarot 6115 320KV 1855 CF Prop or something else?

[@robbo580]

could not believe my eyes @2:21

[@tahayt6142]

What that's nothing new

[@robbo580]

@@tahayt6142 it was in 2014 😉

[@ismailekitas2836]

OMG !!! What this means working with battery ?

[@balatarin8533]

Please tell me name of this place? where?

[@mr.e5930]

do you have any links to the parts ?

[@claudiocosterni6488]

What mean for the owner "full size Nikon"?!

[@dronesvisionsaeriennes]

Hi Moongrass...which is the weight of your Tarot...? Thank's a lot Philippe

[@ToolsAndI]

+Drones Visions Aériennes Sad to say this is not my drone; I just recorded it. Thank you.

[@vanokiknadze4423]

what motor do you recommend with this esc Hobbywing XRotor 40A 2s 6s?SunnySky X2212 KV980 Brushless Motor?is ok or not ? F450 Quadcopter Frame Kit?

[@ToolsAndI]

vano kiknadze The owner of this drone is the youtube user named rochanroll. I don't know anything about it, sorry.

[@vanokiknadze4423]

ok

[@maykesantos2548]

+vano kiknadze Tiger Motor TM4014 400Kv with 17" props for more stability. If you need to withstand winds and bad conditions, Tiger U7 490 with 16" props.

[@ToolsAndI]

I'm hoping the owner of this hexacopter answers your question because I don't know much on electric power.

[@nishantbhandari5023]

what motor was those ??

[@tekoppentekoppen761]

That must be like 15 grand?

[@KrishPatelofficial]

tekoppen 3K Max

[@digitalvideoshow]

which engine you are using? Kv?

[@claudiocosterni6488]

If you look at this video you can see, more than one time (for example at the end, at around T 4:46), wrote on the engines: X5008 KV330. So if you search this with Google appears: Foxtech X5008 KV330.

[@tekoppentekoppen761]

...and then came phantom 3 and wrecked the party.

[@fr3dsky980]

This is for > 500$

[@ToolsAndI]

Between 8,000 and 10,000