Programming a Chevy Garage Door Opener | 3 Button Garage Door Opener on 2023 Chevy Traverse

[@keithe54]

Very helpful, i have a liftmaster garage door opener and the programming worked the same way as you showed in the video.

[@sticksnstones140]

I have a 2018 chevy traverse and a genie 1035. Clear all the codes on the chevy by holding 1 and 3 until it blinks rapidly. Once cleared, with the garage door open, hit the program button on the genie for approximately 1.5 secs and let go it will blink purple. Go to the car and hit the button desired on the car and hold the button on the remote that comes with the opener. You will see the rapidly blinking light that he talks about. This should sync. I did a little trial and error, but this is a super helpful video!

[@richo8767]

Thanks for the comment. I could not figure out why the button would no longer program this way, but I had to clear the codes that way and then it worked.

[@matthewmoore8125]

Thanks for this

[@Monty-xo6vs]

Thank You so much, that was easy only because of your video. It worked the first time too. Unbelievable.

[@jalahnharris6070]

thanks boss man! this helped a lot. happy new year to ya!

[@RandomReviewsHowTos]

Glad it helped!

[@anvildesignartphotographyl5646]

i have a genie garage door opener, everything worked with programming the car. but, had to push the learn button on my garage door opener, and then 2 seconds with the button i selected in the car. worked! took forever to figure out that i had to push the learn button.

[@dschmidt1140]

Thanks! Worked perfectly.

[@jessicapurkey542]

Worked on first try! Super easy! Thanks so much!! 😊

[@RandomReviewsHowTos]

You’re welcome 😊

[@Dc_7o2]

Thanks for the video couldn’t find how to program my garage home link in my manual

[@funkatronic]

Worked on a 2023 Z71 Tahoe. Thanks for sharing friend!

[@RandomReviewsHowTos]

Glad it helped!

[@craftistic82]

Worked for me in my 2024 equinox Thanks!

[@Mikeso367]

Thanks! Worked!

[@davedwave7]

That did the trick. Thank.

[@bxb590]

Thank you for making it so easy.

[@tonysfarks5070]

Thank you sir Quick simple n easy

[@puppetworld3417]

Thanks for the video it worked

[@danm793]

Any idea how to program without having a remote???? This is called Rolling code method? Please advise

[@omdc535]

This technique did not work for my 2021 Blazer. The Genie owner's manual did not work either. I had to push the Program button on my Genie 2028 until the light flashed purple. Then, I simultaneously pushed the hand-held remote button and in-car button until the in-car light rapidly flashed.

[@michaeljackson5862]

Yo this worked for my 2020 traverse. Took 5 seconds 😂😂😂😂😂😂😂😂 i honestly just did it.

[@worldpoole]

Thanks I tried no success it might have needed to be reset. But it did work on 2.

[@sticksnstones140]

Just left an instruction filled comment on this page. Not sure what opener you are using, but check my comment and see if you haven't figured it out.

[@terrancealexander4299]

Thanks

[@glanphear588]

Hi, if i may ask. Do you like your 2023 Chevrolet Traverse so far? And which trim do you have RS, Primer or High Country? I'm possibly purchasing a Traverse High Country model this week.

[@rzbrown3]

We just got a 2020 RS and it’s very nice

[@Lily_Stieferman]

I just got the 2023 RS, I love it!!!

[@pattyl.3290]

I just got a 2022 RS it’s very elegant, so much technology easy to use, runs smooth spacious, you won’t regret it.

[@dennisrees9615]

23’ redline we love it

[@maggiesphotography4257]

Thank you !

[@BrianaAnderson-po5sc]

What if you don't have a garage door opener? My car was stolen and that was one of the things we didn't get back when it was recovered. I just got my equinox but we still don't have a remote 😢

[@RandomReviewsHowTos]

You can probably order a replacement and reprogram it all. I'd recommend that anyway considering your car was stolen. I'm sorry that happened to you.

[@BrianaAnderson-po5sc]

@@RandomReviewsHowTos we already reset the box I just didn't want to have to pay for another one if I didn't have to

[@Lily_Stieferman]

I cannot find my garage door opener, is there anyway to program without it?

[@sticksnstones140]

You can buy an aftermarket remote off whatever site and program that to the opener. Once the opener is set you can program the car. I also left instructions for how I did mine in a previous comment.

[@earlcarter4682]

Where you holding the car button and the garage door opener at the same time for 5 sec or did you release the garage door opener

[@RandomReviewsHowTos]

Holding at the same time. It's essentially picking up the signal and programming itself.

[@darrendandridge8786]

Thank you

[@januarymcneal5091]

Can I do this without garage door opener

[@RandomReviewsHowTos]

I'm not 100% sure, but I don't think so.

[@angeldolata8056]

I would like to know the same…

[@sticksnstones140]

No you can't. But you can buy any opener online and sync it to your opener. And then you can follow his methods to get it to work. I also left a comment that has instructions for my Genie model that had an extra step.

[@ricardocabrera7189]

It didn’t work for me. I have a Genie model 1128B garage opener

[@sticksnstones140]

Hey man just left a comment with instructions in case you haven't gotten it fixed yet. Might be the model or method that is getting you. Check my comment above

[@KarlaWillman]

Can't get any of the lights to come on

[@Dabtrain]

Didnt work for my chevy tahoe

[@ashleycall9417]

ugh it didnt work for me :(

[@RandomReviewsHowTos]

I'm sorry - same model? Try slowing down with the steps...