How to program a Toyota Land Cruiser remote key fob 1998 - 2002

An easy to follow video on how to program a remote key fob for a 1998 - 2002 Toyota Land Cruiser.
More free keyless entry programming instructions available at www.ProgramYourRemote.com/
1. Start with key out of ignition, drivers door is open all others closed and drivers door is unlocked.
2. Insert key into the ignition (Do NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.
4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.
5. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once indicating successful programming. If the door locks do not cycle, or cycle twice. Repeat steps A and B in step 6 as your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Close drivers door.

[@robertbrown3291]

Thanks mate your a legend thanks again buddy

[@PYR-Auto]

You're Welcome! Glad it helped

[@alekseyyelchaninov2409]

Works well, thank you helpful

[@PYR-Auto]

You're Welcome!

[@stiofain4693]

Thanks so much 😀

[@PYR-Auto]

You're Welcome!

[@dashtyATG]

Thanks for your videos How about uper land cruiser like any above 2009 via IM508. Do you have any clue please

[@PYR-Auto]

I don't believe the remote is onboard programmable for a 2009 land cruiser

[@renjithraj16]

Superb

[@PYR-Auto]

Thanks!

[@jasonsomarriba4729]

do you need to have the original oem radio?

[@trevorneufeld5038]

Thanks, any idea if this method works for the lx450 from 1997, the landcruiser 80 series?

[@PYR-Auto]

Not sure on that actually

[@Alexandro76206]

Nice

[@PYR-Auto]

Thanks!

[@jeremygreen1074]

Would this work on my 02 prado

[@kalmallparkour]

Is it effect car ignition? Because Recently I remove the remote box under the steering dashboard then I try to put it back,but can't start??

[@PYR-Auto]

This procedure only programs the remote potion of the remote head key - I don't know if removing the remote keyless entry module can prevent the ignition from starting.

[@markocampo9196]

my remote only seems to lock and unlock if I'm only a foot from drivers side door. Is this a programing issue or a keyfob antenna issue?

[@PYR-Auto]

It could be either. Have you tried replacing the battery in the fob? That would be the first thing to try

[@danishcool3740]

Plz sir rpm out singanl pin and colour wire ecm 2002 land curicer

[@PYR-Auto]

Sorry I'm not sure what you are asking

[@muhammad_eid_ahmed3730]

It works any remote or all the remote is same i mean the chip inside?

[@PYR-Auto]

It wont work on any remote - It needs to be specifically compatible with your year, make and model

[@jamaabdi7937]

Do i need to buy the remote from Toyota or it could be off-shelf from any store?

[@PYR-Auto]

It doesn't have to be from toyota but it does need to be the correct remote for the vehicle

[@daveregan8410]

Will this work when alarm going off??

[@PYR-Auto]

I don't believe so

[@Nastrusnicu]

How about the J95 2002? Y need a remote key and don't know the frequency. 433Mhz or 304Mhz for Europe

[@84stoney]

433, I'm fairly sure.

[@les7213]

Does the main remote have to be the original?

[@PYR-Auto]

No

[@user-qr7xv7xw7o]

Ок

[@pmoran245]

I have a 2001 Toyota Land Cruiser that I lost the keys for. I changed the ignition for another one with a key. I did this method to connect the keys. The jeep will crank but won’t start.

[@PYR-Auto]

This procedure is only for the remote fobs, not the ignition keys

[@nunyabusiness4510]

Does this work on a 98 Prado?

[@PYR-Auto]

not sure on that

[@DK-vx5co]

My lock gets tired after 2 or 3 cycles of lock-unlock. Anyone know why, and what the fix for this is?

[@PYR-Auto]

try just moving the actual lock on the drivers door with your hand for the cycles

[@DK-vx5co]

@@PYR-Auto Thanks. I actually did that and it worked.

[@jabangun]

My car is strange. When the door is open, I press lock and it automatically goes back to unlock. So I can cycle. Any ideas?

[@PYR-Auto]

you can try moving actual lock on the drivers door with your hand for the cycles

[@jabangun]

@@PYR-Auto Thank you. But it also did the same. It won't stay on lock and automatically goes back to unlock.

[@glendadavies1455]

Single button remote

[@PYR-Auto]

These instructions are for vehicles with factory remotes only, it sounds like your remote is for an aftermarket system.

[@xzzaaqa]

Can this be done with an aftermarket fob or does it need to be Toyota

[@PYR-Auto]

An OEM Toyota fob is best but you can use an aftermarket fob if it is compatible with the OEM FCC ID:

[@mountainconstructions]

Genuine Toyota Fob only has 1 button

[@Locksmith4you]

Nice

[@PYR-Auto]

Thanks