Programming a Key Remote (1998 105 series Landcruiser GXL)

[@michaelweeks972]

Mate, your a bloody legend. I have just done what you did and I now have a working fob for my old girl. I have a 100 series and it’s a beautiful thing to know that there is young guys out there that are offering help to us older guys, rather than being ripped off by someone else. Chers mate, time for a 🍺 first rounds on me. 👍👍

[@WillsLandcruiser]

Comments like this make my day 😆 Cheers for the kind words, I’m so glad I could help! 🍻👍

[@JamesMcClelland-pw4pk]

I live in Northern California, I'm old as HELL, 66, love new tech. If I was about 50 years younger I'd be doing exactly what you are doing! So thanks for taking the reins! I enjoy your videos but mostly I enjoy your cander. I hope you blow up! Thanks Mate!

[@WillsLandcruiser]

Thanks for the kind words 😊

[@GeoffHudson-fn5ej]

Almost perfect. I have the 2006 GXL, and when I had to reprogram my single button FOB, I had to go from fully Off to On 20 times before I could activate the programming mode. I then pushed the button on my failing remote, and then on my new one, and everything worked perfectly. I also didn't need to disconnect the batteries. So my process was - 1 - Door Open 2 - Remove Key 3 - Lock Doors using FOB 4 - Unlock Doors using FOB 5 - Insert key and turn from OFF to ON, 20 times, in under 20 seconds. (Indicators then flashed 20 times) 6 - Press button on Old FOB, (Indicators flashed twice), Press button on New FOB, (Indicators flashed once). 7 - Turn key ON to lock in and exit programme mode. Thanks again, without your video and instruction, I would never have got it. Everyone hates getting ripped off by locksmith thieves, when it is a relatively simple process. Like all the others, if you're ever in Ballarat I'm up for the first beer!

[@gavanmitchell9095]

Thanks Will from the past. Worked first go for me (sorta). First 20 turns didn't, but after starting the procedure again after waiting a few seconds it seemed to kick into program mode about half way through the 20 key turns then all good! Absolute legend. 98 petrol 105 here.

[@alexmckenna1726]

Bro you are a legend! I’ve had a remote for my 2002 GXL fzj105 for about a year now and kinda forgot about it because I was told by a key cutter that programming it was difficult. It took me 5 minutes to do it after watching your easy to follow video. You are a king 👑❤️

[@paulhurst2911]

came across this by accident but i ordered a remote from your link and got it programmed first go using your video and the original instructions in my factory manual, for those doing it timing is everything, its good to have working central locking after both originals died, thanks

[@malbasketter1373]

Thanks so much, I bought my 105 hzj 2004 six years ago central locking not working. Gat a new remote 18 months ago and gave up as it would not work. 15 mins this morning and bingo all working. So happy. Thank you.

[@brendabeutel7329]

Fantastic video mate, youre presentation skills are amazing. So easy to understand and concise and to the point. Thanks so much we're going to give it a go with our 2002 HJZ.

[@christiankerr5186]

What!!! That is a cool mod addition. And then you were excited to declare just over 200 subscribers and now 6.7k. Great series and still going

[@Fettoccini]

Worked perfectly first try on my 90 series Prado. Good vid! Thanks

[@joeblow1711]

Legend! Worked for me even with FTE converted 105 with FTE ecu 👍🏼

[@jakelyons6226]

Oh you’re an absolute legend worked first go. Didn’t wait the three minutes though just disconnected it then reconnected within a minute

[@WillsLandcruiser]

Awesome I’m so glad to hear that! 👍👍

[@troubledtinkerer]

Thanks for ths video mate. I was having no success with the instructions provided with my remotes (Prado) and I decided to follow your advide instead. It worked perfectly first time!

[@andrewstubbs492]

Mate awesome info, brought the remote from you place in the East. Went out and first time following your instructions 👍 success 😀😀👍 Checked it all working while in the cruiser, Got out and nothing🤦‍♂💁 got in and it worked Worked out that if I hold the remote up high it works fine I think I need to check the aerial from the remote control box is still there 🤞 either way it’s working Thanks mate great video

[@jjimmies]

Absolute legend, i got it first go.. and also forgot my bonnet was up and got the extra flashes😂

[@Kreat0r1]

Worked a treat dude, just bought a $30 ebay special and it works! Thanks Edit: FZJ105 1998 Australian model

[@FirePantsFabrication]

Legend Will, it took a couple of goes, but got it in the end. Keep up the videos.

[@jamesfogarty]

Awesome. Absolute legend! I think it’s already been said, but I owe you a beer if your ever in QLD 🍻 I bought the fob in the link and just followed exactly what you did. I now have a working remote and definitely worth every dollar. Mines a 2001 GXL petrol manual (105). Thanks heaps mate!!

[@WillsLandcruiser]

Haha legend! 😍 I appreciate that. Makes it worth it that I can help guys like yourself with stuff like this! 👍👍

[@matteobombonato5840]

Mate. just tried this on my 2002 Prado and it FREKING WORKED....wooooohoooooo

[@WillsLandcruiser]

That’s what we like to hear 😉

[@troubledtinkerer]

Thanks for putting this comment in. I kept trying the Prado instructions without success until I read your comment and the cruiser steps worked perfectly the first time for me!

[@frankryan3270]

Great video. After a few times trying on my 2010 gxl troopy I didn't have any luck but last night it worked and I think the trick for me was to have someone else reconnect the battery after the 3 min interval that way you can be in the car with the door shut and it worked first time. Not sure if it was done it but definitely seemed to help me

[@crankyparrot1248]

Hi Will, Thanks for the vid. I have a tip for you- if you replace the cr2032 battery in these fobs with 2 cr2016 batteries (same diameter but 1/2 the thickness) you can increase the range. I used to have to be nearly touching the truck but now I can be 5 metres away!

[@WillsLandcruiser]

That’s a great tip! Thank you! To my understanding- there’s also a way you can adjust the range at the receiver module?? Not exactly sure but it’s just what I’ve heard!

[@crankyparrot1248]

@@WillsLandcruiser oh cool I'll have to check it out. Would be handy to have a huge range so you can check if the truck is locked from across the street.

[@WillsLandcruiser]

@@crankyparrot1248 sure would be handy. The amount of times I walk 10m away and go “dammit did I lock the cruiser?” 😂

[@Jason-kn3tw]

Worked first go - thanks man

[@carlparsons9251]

Good video. So I did mine but think the remote I got do work with it at the end my flashes 2 times

[@WillsLandcruiser]

Yeah I think mine flashed a heap because the bonnet was open. Sensor might not be applicable to all years

[@rodlacanna8998]

wicked worked landcruiser 2003 HDJ100 TKS VERY MUCH

[@martinrumpf6662]

Thanks for this. I have the module like you showed, now will order the remote. Legend! On another note, may I ask which aftermarket snorkel you use? I can see it's one which didn't require the indicator light to be moved.

[@WillsLandcruiser]

Hey mate, it's on the cheaper end of snorkels but it does the trick and I think it looks great! I got it from a website called Oz Best Deals. Cheers

[@tiamarie177]

Doesn’t matter what remote you use? Also do you have a link to that rear window spoiler can’t find one the same cheers

[@steveg7553]

It works on a 2000 model 105 series landcruiser petrol engine....awesome thank you,

[@timharrison6254]

About to have a go with mine, does yours have an immobiliser and if so did it work for that too?

[@matthobbs5345]

Good video! Ive got a bit of a funky problem that I think is not allowing my programming to work. My hazards don't work nor do they flash when the car locks. I assume this problem will contribute as the indicators have to flash for the programming to work?

[@WillsLandcruiser]

That is an interesting question for sure… firstly, if you’re in doubt, watch my video on where to locate the wireless locking module. And secondly, do your indicators work?? Even if they don’t- it’s just acknowledging that you have entered the sequence. So you could correctly enter programming, but you may not have any way of knowing you have if the indicators can’t flash- if you get what I mean!

[@matthobbs5345]

@@WillsLandcruiser yeah I have the locking module! And yes my indicators work, I think there is a break in the wire from the flasher relay to wherever else it goes so I thought perhaps it's not working as the module cannot send or receive the signal through the flasher relay as part of the programming? I honestly have no idea haha. I'll have a few more goes tomorrow! Love your work, plan to turbo the old 105 soon :)

[@WillsLandcruiser]

@@matthobbs5345 a few people have said they only had luck when a second person was connecting the negative terminal, so the drivers door could stay closed the whole time. Maybe worth a go? Hope you have some luck! This process is so temperamental. Cheers for the support! The HZ loves a turbo if it’s done safely! :)

[@matthobbs5345]

@@WillsLandcruiser cheers brother, I'll try the door shut as well! Thanks for your help!

[@zaccheney2141]

@@matthobbs5345 did you have any luck. I have the 100 series that’s has the same issue. Indicators work fine but no hazards. Assuming it’s a relay.

[@jakemunnings7859]

Great vid!! Do you reckon you’d follow the same sequence to program a new key too?

[@WillsLandcruiser]

Yeah definitely! This was a new key in the video

[@mountainconstructions]

Skip to the middle of the video if you life is important

[@giscard23]

Hi, Great video. Do you know wich chip your remote uses? Seems like you need to know this info to buy a remote. Thnks

[@WillsLandcruiser]

Hey mate I have no idea sorry. I think if you just look up a Toyota remote for a cruiser/prado/etc. then you should have the right one. As long as it looks like mine and has the Toyota symbol on the back

[@Galaxie00]

Worked good stuff

[@texminchin4062]

Nice video mate!

[@vdlau]

Hi mate where did you get that key remote from?

[@WillsLandcruiser]

I’ve got the exact link in the description mate. Arrived quickly and it’s a quality genuine remote!

[@bottleobrandy]

a

[@seahawksforever9504]

What do you mean by flashing 20 times? I don't see any flashes on your video

[@WillsLandcruiser]

The indicators will flash 20 times to show that you have successfully entered programming mode

[@outlandyishrig2557]

Hey Will, we need a remote for our 98 GXL, where did you buy the remote ? from Toyota or somewhere else ? our old remote circuit board failed 😢

[@WillsLandcruiser]

I’ve put the link in the description. Would highly recommend!!

[@outlandyishrig2557]

@@WillsLandcruiser Thanks Cobber

[@xavierhart695]

Hey mate, have you done the 7 pin mod to your cruiser which allows you to unlock the centre diff in low range. I'm thinking about giving it a crack on mine pretty soon!

[@WillsLandcruiser]

Hey mate nah I haven’t even thought of that one sorry! I hope the conversion goes well for you!

[@mrh22a]

Thanks for the video! Question tho, did you have the drivers door open or closed when spamming the ignition 20 times?

[@WillsLandcruiser]

Hey mate door was closed. I think the most important thing is spamming that key within a really short period of time

[@mrh22a]

@@WillsLandcruiser legend! I’m trying it on a 2005 landcruiser, same remote and the door open and close thing is confusing

[@WillsLandcruiser]

@@mrh22a it’s all really confusing 😂. I think it comes down to luck just as much as getting it all right. But yep basically get someone else to put the negative cable back on so you can keep the door closed, key in and spam it 20 times within like 10 seconds and you *should* be right

[@creber31]

No luck with my 2002 105 gxl 😫 been trying for last few days

[@WillsLandcruiser]

Have a scan through the comments, some people have said it worked better when they had a second person reconnect the negative terminal so the drivers door could stay closed the whole time

[@stud1685]

We’re did you get the remote

[@WillsLandcruiser]

Link’s in the description mate

[@tiamarie177]

I’m guessing this won’t work on a POV pack 105?

[@WillsLandcruiser]

I don’t think the POV packs even have central locking sorry mate. Definitely not the wiring looms to support a remote anyway

[@Mixos_place]

same in my 2001 hdj100.but i had driver's door open.

[@MasterTrout]

Loved the vid, any chance you can post a picture of where the receiving module on your cruiser is? I have the same year model and it's a GXL, but i cant find anything that looks obvious haha

[@WillsLandcruiser]

Latest live video is up for you mate 👍

[@australianchad6450]

I cant get it to work

[@Henry-zo5xr]

Hey i tried this and it didn’t work. But here is the solution😃 Genuine Toyota Remote Control Manual says to turn from OFF to ACC 20 times after reconnecting the battery. This worked first time for my 2003 100 Series Landcruiser (turning from ACC to ON 20 times does not work many times) try it😁 cheers and good luck guys

[@mitchellgarland4171]

Is yours petrol V8?

[@jazzie1690]

Any one if this works for the 80 series’s Cheers

[@Bryce.Eriksen]

Put a roof rack on it

[@WillsLandcruiser]

Aha definitely on the list mate. Nice big flat rack for a roof top tent 🤙

[@rednecklux1368]

Awesome vid mate I’ve got a 105 series petrel mint Ive also got a Lux doing a build can come say hi on my channel your very welcome

[@WillsLandcruiser]

Cheers mate I appreciate that!