Project 094 | Making Garden Spiral Hole Drill Planter

[@jameswright-2024]

👏 very instructive and clear step-by-step how to make something that's actually sellable and helpful👍 Thank you for sharing with us

[@goosecouple]

Clever. A machinist who is also a farmer. A rare species.

[@manickn6819]

The bending jig worked out surprisingly good. The outer shield and spring is a great idea.

[@baazigaj9125]

Whats the purpose for outer ring and spring?

[@manickn6819]

@@baazigaj9125 outer ring keeps the soil contained when the auger moves up and down or the soil will collapse in. Especially the loose soil he shows. The spring causes the auger to come back up on its own when pressure is released so he does not have to pull it up.

[@joeschlotthauer840]

Should be in stores, Genius...

[@jameshorrocks2939]

A small step back from my expectations. These guys were clearly on a path to lunar exploration. But heck who doesnt need a back saving plant hole digger. Nice job!

[@darobbadooz]

I am a great admirer of you! I can watch your videos over and over again.This is certainly something I would do in my next life. Not that I am that old (77) but I will have to start earning money for the equipment. Now I'm jealous. Anyway, just to let you know that you give me inspiration! Thanks!

[@حسين-ج9ط7ي]

بارك الله فيك اخي دائما تبهرني اعمالك الراقيه انته الاول انته المبدع

[@air-techrussia3538]

Руки есть , ума не надо.... Шнека было за глаза , все остальное от лукавого.... Сомневаюсь , что Шурик обычный справится с таким грунтом , при таком диаметре, там надо 1-1.5 лошадиных силы , при пониженных оборотах до 200 -300..... Лайк за шнек !!!!

[@AndriiBilous]

да говно это. высер

[@pasqualefontana2193]

Incredibile come sempre...un maestro che partorisce creature dal nulla... vorrei entrare per un attimo nella tua testa e vedere da dove nascono tutte queste meraviglie...onore a te amico mio dalle mille risorse...

[@ABDULLAH-BN-KHALED]

👌🏽شـي فـاخــر .💫. من الآخــر👌🏽 . 👍🏽. 👏🏽. 👍🏽 .👏🏽 .👍🏽 .

[@impossibletm2618]

Cool! This basically works like those center finding bits used for hinges.

[@brainfornothing]

Good point ! Also, like that mortise drill bits. Cheers !

[@shakilahmed6870]

I loved the part while the spiral were matching each other perfectly

[@ecrusch]

By far, one of the coolest channels on You Tube...honest!

[@vilmondesribeiro4363]

thanks bro! now I know how to make a spiral axis to my plastic extruder project!

[@jameswyatt1304]

Exactly - you can make a lot with maker DNA from various channels.

[@felixdietzCGN]

Check out precious plastics. They have plans and a professional extruder screw

[@aion2177]

i bet it doesn't work if is that deep. it will create way way to much force on your motor. but in case it works please let me know. I want to be proven wrong. An extruder screw like the one used by precious plastics for example, has much more shallow grooves, and as such the force required is much less. Because it only takes little material at a time. If would take too much, without a strong enough steel, the torque force will break the screw. So for example mild steel might not work for this reason :)

[@la29la61]

Красивый труд завораживает!

[@lloyd4768]

I'm really impressed by the bending jig!!!

[@ventiladordesuco]

I was about to comment the same thing. Although the concept and the build are not as extreme as the others, the ingenious construction was extreme.

[@davey2k12]

Me too that modded press looks usefull

[@TomMakeHere]

This week on gardening extreme... Nice looking tool

[@DBELLTREE]

That tool is worth making more. Bad ass! I would buy it for it's cool factor alone.

[@patrick-ij2xy]

What does the spring and the sleeve do?

[@KillberZomL4D42494]

Genius idea, these guys are geniuses.

[@simonc4927]

Whats the function of the cylindrical piece and the spring?

[@robertgemski7728]

I think maybe to “eject” the soil so it doesn’t just fall back into the hole but im not sure 🤔

[@00xero]

You guys are fucking awesome! In 50 years time youre going to have a museum's worth of contraptions and tools built up

[@GeorgeGeorgalis]

Aerate the compost too... BTW anything to beat the machete to start the compost?

[@ahmadakmal5665]

Hi. Im newbie in this works. Whats fluid are you using during drilling?

[@Cactusworkshopchannel]

this is great! very nice process for the auger! congrats!!

[@pawankumarchohan]

Very well done, nice silent presentation. I really appreciate it for time and labor saving. Thanks

[@daanvolvo5719]

How dit you make the auger plate press?

[@kvorubin]

Земля одни камни, как там че растет..

[@Loviga_]

Сам офигел, там же вечные подкормки нужны, иначе ни как.

[@nandu1770]

Now I really want have workshop like yours.

[@remontstartergenerator]

Спасибо за вдохновение!!!

[@crdnirvana3085]

ถ้าขุดแค่นี้กุว่าใช้จอบดีกว่ามั้ย

[@Charlotte_TSilva]

Master machinist mate.⚓️

[@zaronez462]

Awesome work inventor

[@Nitinkumar-im6ib]

What are u spraying whitecolour liquid???

[@Mocking69]

モグラマシーンですね！！素晴らしい～！！

[@mcboomsauce7922]

How long till you burned up your drill?

[@planbuilduse5994]

That’s pretty cool. Nice project!

[@km.productions]

You guys are awesome!!!!

[@asvarien]

Awesome. But what is the purpose of the metal cylinder / collar around the top of the augur?

[@PKMartin]

When the auger chucks soil upwards, it deflects it outwards, I'm guessing so it doesn't fall back into the hole or spray the user in the face

[@zamistro]

The way you turned washers into a spiral was very clever. I do not understand the sleeve and spring. What is their purpose?

[@rocksfire4390]

the sleeve makes sure the dirt goes to the sides and not into your face. he was drilling pretty fast, if you didn't have the sleeve you could still drill but you would have to go slower unless you are okay with getting rocks/dirt thrown at you. the spring for the sleeve keeps the sleeve at a set distance as hes pushing it into the ground. really you don't need the sleeve or the spring, it just means you can pull the trigger all the way in and get it done that much faster.

[@ГлебНехорошев-ц7ы]

Полезное приспособление. Всех благ.

[@redfish6C]

you really are the KING OF THE DIY

[@dimooonz]

нифига не понял для чего это? кротов пугать? они в шоке под землей валяются наверное))))))))))))))))

[@larrymaloney877]

The dirt was already loosened up. The "ejector" isn't needed (the auger flings the dirt off.") Besides, the ejector traps dirt. Both the ejector and the dirt add excessive weight.

[@reforzar]

Great stuff guys!

[@samuelhaynes4877]

I like it. That was cool.👍👍👍😁

[@WHIRLWOLF]

Dont you think the spring is too stiff?

[@MARFYMAKER]

Ottimo come sempre :)

[@cablecallen]

That is the most over-engineered tool I have ever seen... and I LOVE it!!

[@ColePEET]

Did you make the spring too?

[@wvjs3270]

What is that liquid you used when cutting metal

[@kapilarugeewa9761]

Very good.sri Lanka

[@srinaisyah1709]

Thats wonderfull job...thats i never think to make it in my garage

[@bawaninnet]

Is this for sale?

[@محمدبشار-ث5س]

قال رسول الله صل عليه وسلم من عمل منكم عمل فليتقنه هذا الرجل حريف في عمله

[@phoggee]

I desperately need one of those

[@electronique_et_creation]

Great video, thank you.

[@danielmaillard2304]

Excellent, bravo

[@ranchis9044]

excellent as always. could we see a bit more about that bending jig?

[@Sabrinahuskydog]

See previous videos in channel. They built it in a previous video.

[@ranchis9044]

@@Sabrinahuskydog the bending jig on the press, not the actual press

[@vincentpatrick3179]

Can I get one please , how much would it cost sir?

[@Joelwilly57]

Do you sell them ?

[@dimitri282]

very good job 😀

Great innovation, you good at mechanics, support you.

[@pb6096]

Great work ... is it possible to buy this anywhere ??? Thanks

[@grot29rus]

Не понял! Зачем кольцо подпружинистое?

[@lukiscruz5443]

You and Gary Boyd of Linn Lumber should talk. You guys are primo

[@michaelgrier]

My God, is this for sale somewhere? I've bought the "equivalent" from The Orange Box store but it's pretty much trash. I don't need the spring but I'd love to have something like this that could fit in a 1/2" chuck.

[@frozenprakash]

Damn man, you could create a company out of this. There is no auger bit which is neat and efficient as this !

[@silver7672]

it's very useful and nice, but you have to fix the cylinder with a small handle you can step on, so the dirt will go out immediately from the hole, my respect :)

[@brandonbrand2338]

Yor flippen brilliant man!

[@garrynutter860]

Cant work out what the tube is for ?

[@Yonatan24]

What camera do you use? I'm watching in 480p and it feels like 4k!!

[@StudioGayo]

How can buy it

[@TheAsdfg74]

Incomprehensible device. Why such complexity?

[@MrJewripper]

Very cool, i wondered why the spring until i saw it in use. Do you guys have very rocky/ dry soil? Also what is you favourite thing to grow?

[@weldHAGOJIBI]

Wow, that's amazing. I was impressed.👍

[@thestebbi2008]

Wow 1 mill I have been here sence 50k subs deam this channel is growing

[@RomanA1087]

Just a thought, put 4 or 3 (4 should hold better) 90 degree spikes that will be welded horizontally then bent vertically downward to hold the barrel straight so it doesnt spin with the auger. Nice tool man

[@malypwilco5079]

Nice, How much are they

[@mlangfordoutdoor]

This was amazing

[@حمزةحمزة-م4ف4ض]

Very nice 👍👏

[@marlonnoquillo1955]

Onother genius mind and hands of a fabricator...

[@chaudharynepal1150]

Thanks you

[@trebla4917]

do you sell it?

[@sonyang7910]

Are you sell this item ? On market place

[@ивандутов-ф3т]

Как всегда все по делу.

[@indigo_wolf3574]

Swap to larger drill at 7:35?

[@spongeimperium126]

Can you make a aluminum bike frame out of square tubing?

[@mendax010]

Very good !!!!

[@tecnopufi]

Well, I got the idea, but as I think the external tube should not rotate.....it needs a rim with some spikes

[@robmih1973]

Are you selling this ? Let me know ! Thank you !

[@billiondollardan]

Holy crap that soil is so full of rocks! How do you guys work it? It's got to be back breaking

[@francodiaz2851]

Super 💡 idea

[@garrettmckellar269]

You're a boss my friend. Real boss.

[@durantetest]

Very nice. Thanks.

[@maratah-v7196]

очередной шедевр

[@charlescsmelo]

Amazing!!! Good job.

[@leviSyosef]

Ill save my time and just buy one All those machines worth alot

[@rocksfire4390]

save time and money, they are what like 30$? big deal. like you said all those machines are worth a whole lot and unless you are making stuff with them the investment isn't worth it.

[@billymilligan0104]

Откуда взялась пружина? Как родилась оснастка для закибания шнеков и т.д....🤷🏼‍♂️

[@rivia1187]

Это видео из серии - Как сделать какую нибудь ненужную херню когда у тебя стопицот станков за миллион долларов.

[@smkanchon5140]

I want buy but how could i get it?

[@MrElPoderozo1]

Some say he still drilling away non stop 😁