Project 2g Revamped: How To Bleed A Clutch System

This is a how to video on properly bleeding your clutch system. However, the new master cylinder used in this video was complete trash and I would not recommend it. Go OEM with those units but the slave cylinder works perfectly and would recommend that.

[@davidjames8505]

I like that you credited Jarfomobile. He's a 4g63 god!

[@DSMDally]

nice vid, good info thanks. Keep them coming, and great job on growing a 3rd arm to get the shot and still work.

[@thewalmarttyper]

Need help with my 97 gst, bleed multiple times, hoses to the second reservois in the master (rubber hose) leaking.

[@DSM907Maniak]

How do I know which one to buy from RockAuto? 99 GSX. I need a front upper ball joints and driver front axle as well. But there are so many options on rock auto.

[@dylanellis6255]

good video been having the same problem i replaced it with the 50 ebay one for both master cylinder and slave cylinder and i noticed the greedy one was roughly an inch of more shorter then the oem one gunna try buying from advanced or autozone should be closer to the oem one!i hope! i already replaced the flywheel, clutch , and the clutch fork still no pressure...i had clutch before i replaced my clutch but after that it wouldn’t engage...

[@daniel1997gsx]

yeah i just bit the bullet and went with OEM, problem solved

[@davidjames8505]

I'm working on buying a GSX. The seller and I are working together to fix things. Right now there's a vacuum leak causing the idle to hover around 2K

[@daniel1997gsx]

Vacuum leaks, fun. A boost leak test is going to be your best friend for finding those leaks.

[@devilsadvocate3056]

removing resevoir helps how ?

[@davidjames8505]

Oem is king in the Mitsubishi world. Go to STM tuning for OEM parts

[@laffytaffy7971]

I wish I could watch this video 30 minutes before, I just install the same set up & I bleed those lines for an hour with some help & nothing happens lol so I just watch your video & Find out the master too short 😭😭😭

[@DSMDally]

came across this website rockauto a while back. Was shopping for some parts and stumbled on this bit of info.www.rockauto.com/en/catalog/mitsubishi,1998,eclipse,2.0l+l4+turbocharged,1316583,transmission-manual,clutch+master+cylinder,1996

[@DSMDally]

2 different clutch master cylinders from exedy, MC401 is for the GST. MC188 seems to be the one you needed.

[@daniel1997gsx]

Its the same for all models from Mitsubishi, I dont know why they would change it in the aftermarket scene. Anyways, go with OEM

[@DSMDally]

took a chance and got the MC188 model. It is a match, same rod length. Already installed and works great in my 98 gst

[@DSMDally]

update on the clutch master cylinder MC188, been 4 years still works fine.

[@davidjames8505]

First!

[@johnsee70]

You talk to much get to the bleeding part