Project Blaster PART 3!!! CLUTCH INSTALL!!!

Got the new clutch basket and plates in! Watch the install!
Project Blaster PART 3!!! CLUTCH INSTALL!!!
Project 89 Blaster is coming along nicely. In this video I install a new clutch basket along with new clutch plates and the rest of the clutch side components.
If you enjoyed, please comment, like and subscribe to my channel!
Thank you for watching!
Want to reach me? Email me at..
[e-mail]
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / atvcrazy91
Check out Ashley Tarot
Facebook: / ashleytarot
Music is as follows...
Track 1
Music provided by TeknoAXE.
/ teknoaxe
www.reverbnatio...
Track - Heavy Metal/Hard Rock
Link to track - • TeknoAXE's Royalty Fre...
Track 2
Say Good Night by Joakim Karud / joakimkarud Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0 creativecommons.... Music provided by Audio Library • Video

[@johnc3635]

My first quad was a blaster and like everyone else i graduated to a banshee but i still do buy them and flip them there are tons on long island with blown top ends and no rear brakes lol

[@MichaelSabo]

Lol, the rear brake on this one is toasted too 😂

[@afountain34]

I have a 97 blaster that i rebuild and painted after watching ur banshee rebuild. Keep up the good work and videos.

[@JBFromThe3]

I got a banshee after watching 😂painting mine at the moment

[@MichaelSabo]

You guys are awesome!

[@imperfectrc8735]

Got one for my birthday and am replacing my a arms I'm 13

[@MichaelSabo]

That's what's up man!

[@connersnow298]

Awesome vid

[@helvetica738]

I have a banshee and this is still helpful good job 👍

[@edwardsabo4706]

Great repair job keep up the work

[@MichaelSabo]

Thanks Dad!

[@ericbourgoin1212]

Always looking forward to your next video, knowledgeable guy & great content!

[@MichaelSabo]

Thank you so much for this positive comment!

[@baylorjaxton5199]

i guess I'm pretty off topic but does anyone know a good website to stream newly released tv shows online?

[@tylerdarren3985]

@Baylor Jaxton flixportal =)

[@baylorjaxton5199]

@Tyler Darren thanks, I signed up and it seems to work :D I appreciate it !!

[@tylerdarren3985]

@Baylor Jaxton you are welcome =)

[@JBFromThe3]

Pt.4 looks interesting 😂

[@bdogjr7779]

Hey Mike : You put that kicker spring on like a Boss Bro.

[@MichaelSabo]

hahaha thanks BDOG!

[@discontinued8502]

That thing looks clean, love the vids

[@MichaelSabo]

Thanks man! 👍👍👍👍

[@williammickelson403]

you make everything look so easy lol

[@MichaelSabo]

There is a lot I don't show, like mess ups or parts not fitting correctly at first. If I did the videos would be super long and boring lol

[@jordanvarieur742]

Part.4 is gonna be epic, and in my opinion, personally I would like to see longer videos, more on the build process and just general talking, just my opinion though, thanks buddy

[@MichaelSabo]

Thank you for your opinion dude! I will take this into consideration!

[@antoniom9986]

Im loving this new intro

[@MichaelSabo]

Thanks man, I'm glad you like it!

[@garrett2058]

Just a tip rotella is not made for wet clutches I tried it on my 250r and it roasted the hell out of my clutches

[@MichaelSabo]

I hear both sides of the argument. I've run it in a lot of my bikes for years with no problems though so I lean towards the side of it working well.

[@Thekeithbrewer]

Raptor 125 plastics fit on blasters

[@rpmjunky2795]

Don’t know if it was just me but when you were installing the clutch pressure plate it looked like there was too much of a gap between the clutch fiber plates and the metal front plate. If it’s been sitting crank seals are probably toast. Top end doesn’t sound right. Maybe leaking head gasket?

[@MichaelSabo]

Hmm, I'm not sure; it seemed to go together correctly, and the clutch is working well. It was in dire need of jetting and the TORS was wacked out; I have since adjusted those things. This is actually the first blaster I've ever worked on.

[@FadedbyJay]

Hmmm what could be going on in pt.4? To be continued........

[@tegdarkblade]

Michael Sabo Hey bro the blaster is looking good. In the last clip of it running it sounds pretty rough it sound like your crank seals are gone. I have 2 blasters and a banshee and i have had to replace the crank seals on them. They tend to start leaking if a bike has been sitting for a while. Great vids bro.

[@OGAstra]

you can tell by the idle that theres a air leak somewhere

[@MichaelSabo]

Thank you for the info! The seals were shot on my Banshee too. It is possible that they're shot on this Blaster too. I deleted the TORS and the jetting was way to small; it's running better now. It is still possible there is a leak though.

[@imperfectrc8735]

I am working on a banshee myself I am replacing the a arms

[@gordymrgordy850]

Sorry but the music sux

[@Ghanas]

I miss my blaster :( they are so fun

[@MichaelSabo]

It really is; you can always pick one up for cheap!

[@imperfectrc8735]

Banshee cooler

[@kolbyparr3963]

Hey man is 10w-30 oil to use in the clutch case?

[@jondoe7901]

Did you use impact on the clutch boss bolt ? 58 ft lbs

[@randyschoch3867]

Hey mike did you add a clutch cusion ring???

[@imperfectrc8735]

I forgot I already told you 😀😋

[@imperfectrc8735]

Hi

[@MichaelSabo]

Hello

[@g_family1123]

Looking good looking good now for the real talk where's the Raptor 😂

[@MichaelSabo]

Oh believe me... I can't wait to tear into that

[@shonrob1620]

How much money was put into the blaster when it was sl said and done?

[@cameronlupachino1527]

Hey mike, I just picked up a 04 yfz450 for 1,700 bucks.. thing is in pretty good shape for that price I believe but I’m going through it rn have it tore down to the frame regreaseing every bearing and replacing a few parts here and there and re painting a few parts.. the reason I’m doing all this is the day after I got it I threw the chain and cracked the case. I’m looking at buying factory oem gaskets and bearings I’m in ct believe I’m pretty close to u how much would u charge if I was to ship everything out to you and have u swap everything over to the new cases?? I can do most things but I’m nervous to tear into the bottom end😂 maybe u could even make a vid out of it🤙🏼

[@MichaelSabo]

Oh man; there are a couple people asking me to do builds for them; I'm not sure I am ready for that. Although I would love to help you out. If you're in CT we are probably about 4-5 hours apart. Bottom ends are not as scary as they seem; you just need to keep track of where everything goes and stay clean and organized. Make sure you have a service manual too and a torque wrench and the correct gasket sealer. Take your time with splitting the cases and you'll be mad proud of yourself when it's all together and running!

[@dentkachev8601]

hi,watching your videos,really like them.I'm from Ukraine.assemble a homemade ATV.could you tell me the dimensions of the rear swingarm Yamaha Banshee?it is very necessary.I would be grateful.

[@MichaelSabo]

Hey man, thanks so much! My swingarm is stock; I believe it is 19" from the center of the swingarm bolt to the carrier.

[@tomkulke5675]

What is an good used blaster priced at?

[@OGAstra]

you can get them so cheap i seen one selling at a dealer a couple months ago for only 799 out the door looked mint almost bought it but i didnt need another quad

[@johnc3635]

If your looking for a blaster go for 2004/2006 they have hydraulic front disc brakes .good luck

[@MichaelSabo]

I agree with both of the replies here; I have seen blasters for 500$ on craigslist in decent shape.

[@daryleduardo7055]

How in the fuck do you split that gear on the back of the basket?

[@kxmotovlog4711]

buy a dirt bike for progect

[@imperfectrc8735]

You are so nice

[@MichaelSabo]

Thanks dude! I try