Project FENCE - How to do a metal fence with a stone looking base and a sliding car gate from 0 -EP1

Greetings boys and girls, in today's video I will show you how I did an Iron Fence with a pedestrian access gate and a sliding car gate from 0 that will have the base with stone design and the interior of the iron frames filled with metal wooden textures, stay tuned and check it out. The work lasted for 2+ weeks due to heavy rains, and since this project is so big it will be covered in multiple episodes, three to be more precise.
Materials that I used and prices:
100x100x4 mm square pipes - 6pieces of 3m lenght -248ron per piece
20x20x2,5mm - 4pices of 6m long/per piece - 51ron per piece
40x40x4 angle/L shape - 6pieces of 6m length/piece - 171ron per piece
Flat band 40x5 mm - 3pieces of 6m length/piece - 46ron per piece.
Transportation = 150ron.
And for the inside wooden slats, I got them from Emag:www.emag.ro/set-25-buc-sipca-...
25pieces with screws per set(448ron/box) and for 10m of the fence I required 4 boxes.
Welding rods of 2.5mm and 3mm. The black paint that I used is this one:
www.hornbach.ro/shop/Email-Pr...
And the rest of the iron accessories for gates I got from HornBach.
Also thank you for watching the video all the way, I really appreciate it(it takes a lot of time and effort to create these videos)
If you enjoyed the video don't forget to click on the like and subscribe button for further videos like this(it's free)
If you want to be a supporter of the channel you can do so here, it's much appreciated:
- Donations: www.paypal.com/donate/?hosted...
- Paypal: www.paypal.me/SanKraN87
#HowToDoAfence #SteelSlidingGate
For business enquires you can contact me via email: [e-mail]
Please note that any tools or references in my videos are not promoted or sponsored by anybody, I do/use them at my own expense/purchase.

[@cosmindumitru508]

Good job..💪👏

[@cristinaneagu4639]

Foarte utile informatiile, asteptam cu interes continuarea.

[@IlieProduction]

Un mare like, te astept mai des pe canalul meu.👍👏