Project Scale RC Prerunner 2wd Toyota Hard Body Part 5

The good news about the roll cage is we have to build it out of metal Project Scale rc prerunner part 5 is done
RC4WD 1987 Toyota XtraCab Hard Body
Hit that like and subscribe for more RC builds and content Check out Scale Metal Supplies scalemetalsupp...
/ @scalemetalsupplies
www.instagram....
store.rc4wd.com
RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (100mm)
store.rc4wd.co...
RC4WD Extended Shock Ends for King Off-Road Shocks
store.rc4wd.co...
RC4WD 1987 Toyota XtraCab Hard Body Complete Set
store.rc4wd.co...
1/10 Scale Hard body RC prerunner build with full interior lights and long travel trailing arm setup Running on 3s with a Hobbywing EZRun MAX10 Sensorless Brushless ESC/3652SL Motor Combo (5400kV) this thing should rip pretty good once we figure out pinion size. I rebuilt the Element RC Stealth X Gearbox with the zero over drive setup and on a 18t stock pinion with this motor setup its spicy, cracking wheelies spicy. Stay tuned as we build this thing and see if it even works.I picked up a Element Enduro Gatekeeper rtr for super cheap with some Amain credits with the idea to build my first ladder frame railed hard body prerunner. I chose the gatekeeper because it comes stock with a true 4 link solid rear axle and has the ability to run the Element RC IFS Conversion Kit and my plan is to not use the front drives and run it 2wd with some custom long travel king shocks. We got a RC4wd 87 Toyota Extra Cab last year for my birthday and its been sitting in the box just waiting to be built. I might even test fit the 1/10 scale ford bronco hard body we have as its close in wheelbase compared to the Losi baja Rey that is a long batch. I got a plug and play brushless system that will be going in the element and I need to do some research and learn more about gearing and spurs and figure out something for the transmission. I reached out to element rc and associated with some info on how to convert this model to rwd and they had frankly shty answers from people clearly not involved in the tech side. I came up with a cool solution that I wanted to share in this video so check out my attempt at building a 1/10 scale electric rc prerunner baja truck.
www.amazon.com...
www.amazon.com...
Purchase the new Losi Baja Rey 1/10 King Shocks Ford Raptor Baja Rey 4WD Brushless RTR with SMART www.horizonhob...
@White Bat Audio Karl Casey @ White Bat Audio
/ @whitebataudio
1/10 Enduro Gatekeeper Builder's Kit
www.horizonhob...
RC4WD 1987 Toyota XtraCab Hard Body Complete Setstore.rc4wd.co...
Hobbywing EZRun MAX10 Sensorless Brushless ESC/3652SL Motor Combo (5400kV)
www.amainhobbi...
Element RC Enduro Gatekeeper 4x4 RTR 1/10 Rock Crawler w/2.4GHz Radio on sale at this time $299.99
www.amainhobbi... 2-Pack Photography Lighting LED Video Light Stick Kit Dimmable 5500K with 79-inch Light Stand for Photographic Video Fill Light/Live Streaming/Video Conferencing/Zoom Calls/Live Streaming and (2)75 inches Light Stand for Studio Photography, Video Shooting
/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1How to film rc how to make mini studio how to build sim racing cockpit scale rc truck scale rc prerunner rc paddle tires rc dune buggy rc buggy rc radio-controlled custom prerunner rc hard body toyota

[@707Mikey]

cant wait to seee this thing hitting the whoops

[@DoubleClutchProductions]

Me too man, excited to see it run

[@MidCoast]

The hood is a pain, I really want to do something like this. Thanks for the inspiration and details. Truly a gentleman and a scholar!

[@DoubleClutchProductions]

Thanks buddy and I appreciate the kind words

[@toddbertram6556]

The for sale sign is a nice touch. Fun little series, I appreciate the work it has taken.

[@DoubleClutchProductions]

Thanks for watching Todd. The for sale signs always give me a laugh 😂 Appreciate the support 👍

[@isawul00k]

Associated is always coming with the best..

[@DoubleClutchProductions]

Slimey

[@creamyhummus]

YESSSS NEW EPISODE!!!! Best RC series on KZbin

[@DoubleClutchProductions]

Ha ha,thanks for watching

[@mitsuman5555]

Tamiya TS paint sticks to Tamiya PS. So if you put down a coat of PS on the outside of the lexan fenders you can then top it with TS to match the body. Much respect for seeing this project through and making these videos 👍🏻

[@DoubleClutchProductions]

Good tips, the problem I see is when I crash this thing and the lexan flexes it will crack the TS instantly same if it was inside, tested this on a previous lexan bug body, I look forward to seeing it in sunlight ripping around, thanks for watching 🤙

[@FarmerFpv]

That thing is so sick! Reminds me of my lifted Yota back in high school. I miss that thing. Subscribed, & Liked.

[@DoubleClutchProductions]

Yota love... Thanks for the support 👍

[@travis4man]

Super cool!!! Great work, thanks for sharing!!!

[@DoubleClutchProductions]

Right on, thanks for watching 👀 👍😎

[@dc5050]

This is literally my dream build now and it’s so inspiring 🤙🏻

[@DoubleClutchProductions]

Thanks for watching buddy 🤙

[@paulmcnamara16]

Cooool build! So can't wait for the running video! I live in the UK and so hear ya on the trying to paint stuff in cold and damp conditions! Plus will be looking for that E6000

[@DoubleClutchProductions]

Thanks from across the pond, e6000, shoe goo or GOOP are similar, if I would have used epoxy this thing would have self destructed when I rolled it down the sand dune hill, check my instagram for a few teasers of this truck running, thanks for the support 👍

[@paulmcnamara16]

@@DoubleClutchProductions don't have insta but saw that epic roll on last week's TCT very impressed! Could defo have used it on my 1/6 F350 to Excursion conversion I'm doing right now! Have another 1/6 f350 hard shell and an old 1/8 proline desert rat shell I feel a 1/6 ford pre runner shell on an emaxx chassis coming on! 😉👌

[@DoubleClutchProductions]

@@paulmcnamara16 that sounds dope 👍

[@paulmcnamara16]

@@DoubleClutchProductions have a look buddy I've posted a few videos of it on my channel would love to know what you think of it!

[@paulmcnamara16]

@@DoubleClutchProductions I meant I have vids of the Excursion havnt started the pre runner yet only just had the idea thanks to you buddy! 🤣👍

[@kevinklein1806]

That is such a rad build man.

[@DoubleClutchProductions]

Ha ha thanks for watching buddy 🤙

[@marcustjaden4314]

Perfekt build! That´s what i called cool Rc car! Not these kids cars, where you did not see something behind the windows.

[@DoubleClutchProductions]

Thank you for watching and appreciate the support 🤙

[@jumpinpics2414]

Truck looks awesome. You do a great job of building and making videos. Thank you

[@DoubleClutchProductions]

Thanks for following along 🤙

[@Grumpy9138]

You might not like to paint, you might not think you're any good at it, but I think you did a fabulous job Good job

[@DoubleClutchProductions]

Thanks buddy, perfection is the enemy of greatness, appreciate the support 🤙

[@madmaxximus1234]

Awesome!! I use that goo on my stuff. It can also be removed, also flexible. Great looking project 👌 👍🤙

[@DoubleClutchProductions]

Ha ha right on, the goo is the real deal 🤙

[@masterbastard7521]

Love E6000 shits saved many a roached body. for hardbodies, the super glue/baking soda trick is a game changer

[@DoubleClutchProductions]

Right on, tried to stay away from non flexible adhesives on this one, thanks for watching 🤙😎

[@jhawk1985]

Small tip on shocks. Find a small spacer to put under the shock piston. The idea is to keep the piston in shock oil. Instead of the shock piston bottoming out on the shock when its fully extended. Super sick build man. I built something similair last year but with the proline stepside c-10 body.

[@jhawk1985]

One more thing. This might help with the color problem your having between the body and over fenders. Spazstix makes a Matte paint overspray. It works really good. It will make the truck looks uniform.

[@DoubleClutchProductions]

Great tips man, thanks for watching

[@stevesaenz2926]

You know what's even better the real thing!

[@DoubleClutchProductions]

One day I will, thanks for watching 🤙😎

[@stevesaenz2926]

@@DoubleClutchProductions 👍

[@florianrohner2263]

Man, that thing looks awesome!!!

[@DoubleClutchProductions]

Came out rad, thanks for watching

[@Brian_Mowry__BMOW71]

Such a cool build! Just finished watching the series. Can’t wait to see it on the dirt!

[@DoubleClutchProductions]

Thank you so much for following along 😎

[@pain_inthe_bass]

Much respect from Texas

[@DoubleClutchProductions]

Respect from Oregon, right on

[@eagleeyes9770]

Love your videos!! Great tips, tricks, and ideas 👍🏻

[@DoubleClutchProductions]

Thanks Eagle Eyes, more to come 🤙

[@anibalbabilonia1867]

Man that rig came out looking sweet!👌🥰👍awesome job!

[@DoubleClutchProductions]

Thank you for watching, appreciate you 🤙

[@MrGlidn07]

This truck embodies everything I want in a prerunner style truck, except 4 wd, lol. Mine will be 4 wd so I can stop as good as it goes. I am doing the same thing but my welder just came in so I'll be fabbing up my own cages soon. Keep up the great work I love watching everyone's builds and picking out the stuff I want to do for mine, thanks.

[@DoubleClutchProductions]

Sick, tag me when you finish so I can peep it 🤙

[@Rudestude]

This is one of my inspirations I’m designing a trophy truck on this same chasssis except that the front suspension is going to fully custom fabed i beam suspension

[@DoubleClutchProductions]

Sounds rad, would love too see more when its finished

[@Rudestude]

@@DoubleClutchProductions yea I’m prob going to make the I beam suspension out of aluminum just have to get a design that works I might use the same body too btw what tires are you using?

[@ervinmedina9014]

Dude,,, loving the Build!! Making it a pre-runner is dope!! Allot of custom touches rollcage, interior and paint. Great job. I want to see the running vid. I have a Team Associated CR12 trail truck build that I'm doing. The thing was too SLOW for me. I have since modified it , different trans and brushless system. Need to work out the shocks and tires set-up. Your build is definitely inspiring Me!! Stay safe and bash on from Colorado!!!

[@DoubleClutchProductions]

Right on, inspiration is inspiring lol 🤙

[@BlindGuyRc]

Beautiful man. Really coming along well. Though I've seen the finished project hahaha

[@DoubleClutchProductions]

Thanks man, your channel has been rocking some cool stuff lately keep on going 👍

[@Overland_RC]

This rig looks amazing brother! 🤘

[@DoubleClutchProductions]

Pretty excited too, thanks for watching

[@KPtain_RC]

Awesome truck and a great review! 👍

[@DoubleClutchProductions]

Thanks for watching. Was a ton of fun to build. Just did some work on this truck last night actually.

[@KPtain_RC]

@DoubleClutchProductions You're welcome, the truck looks really awesome! Just subscribed 👍 👍 👍

[@DoubleClutchProductions]

@KPtain_RC yah buddy, thanks 👊😎

[@i47gapples40]

Love the series can't wait for the other projects keep it up

[@DoubleClutchProductions]

Thanks for the support 😎

[@IROC-RC]

Awesome Build! I learned a lot especially about painting the heal and taillights with the orange and red clear paint. When you get your welder; I want to place an order for a full Losi Bay Rey roll cage!

[@DoubleClutchProductions]

Hells yah brother, just curious what would be a fair price you would pay for a Baja Rey full cage?

[@SlavaRC]

Excellent work my friend!)🥰🤩💥💯👍👏

[@DoubleClutchProductions]

Thank you so much 🤙

[@DonaldKing23]

Thats one sick build , sorry I missed the Premiere , My old ass fell out.

[@DoubleClutchProductions]

No worries dude. Glad you peeped it

[@teamsargentrc6399]

Very nice. Great Job 👍!

[@DoubleClutchProductions]

Thanks buddy appreciate you watching 🤙

[@Mar_of_the_Marsh]

might want to make some limiting straps for the rear looking good tho

[@DoubleClutchProductions]

I do need some before we send it, good tips 🤙

[@martyw2f879]

As a race guy I’d suggest running maybe 25 weight in the front and 30/32 on the rear on those shocks, it’ll help a lot with cornering and it’ll move the weight forward when landing a jump👍🏻

[@DoubleClutchProductions]

Good tips, I went with 30wt front and rear for initial testing and a combo of black bottom spring and a red top spring hoping to get out testing soon, thanks for watching 🤙

[@ArmyRedNec13]

Looks sick, after watching this I want to turn my scx10.2 in to a truck like this, I've got a jeep cherokee truggy body that would be sick.

[@DoubleClutchProductions]

Do it🤙thanks for watching buddy

[@alexhardwick2855]

Omg that look an awesome monster of trophy truck n with some real true to detail looks. Absolutely awesome 👌. Great vid 👍

[@DoubleClutchProductions]

Thanks for watching 😎🤘

[@bongloaded]

Sick build brother!!! Looks awesome!!

[@DoubleClutchProductions]

Thank you for watching 🤙

[@chinooks_]

THIS LOOKS SO COOL OMG

[@DoubleClutchProductions]

Thank you 🤙

[@soloshooter5806]

good job..looks great.

[@DoubleClutchProductions]

Thanks for watching buddy 🤙😎

[@brandtcoldwell2975]

I freaking love this build

[@DoubleClutchProductions]

So pumped on how it turned out thanks for watching

[@yamahschector]

Love it and love the bumper

[@DoubleClutchProductions]

Thanks man, thought it was creative and cheap 🤙😎

[@isawul00k]

Should of used a clear coat on the body to blend. Looks sick AF

[@DoubleClutchProductions]

5 coats of clear, the lexan fenders are so glassy on the studio lights it doesnt blend well. Miss you homie

[@nielsjuhr594]

For the Chrome that you're not a fan of you have a couple of options. Hit it with flat clear, it tones down the brightness while still preserving some of it. Or, you can strip it with the purple stuff. Soak it overnight and the chrome finish will desolve by morning. Then you can paint it whatever color you like.

[@DoubleClutchProductions]

Right on good info, yes I got some oven cleaner purple stuff just never used it yet, will try that on the next one👍thanks for watching

[@nielsjuhr594]

@@DoubleClutchProductions your rigs are pretty dope. Appreciate your content.

[@DoubleClutchProductions]

Appreciate you following along, thanks again for watching buddy

[@mmfmakemyfun]

Love the build! Can’t wait to see run vids

[@DoubleClutchProductions]

Little teaser on my instagram 🤙

[@kaylebrigger125]

I got one of those rgb lightbars on my baja rey, they are pretty sick!

[@DoubleClutchProductions]

Sick dude, I need to bind my dx5 to my Bajas so I can us that 3rd channel too 🤙

[@Pezzapoo]

This looks great man! Crash & Burn

[@DoubleClutchProductions]

Crash and burn buddy 👍

[@josephcervantes6872]

Ever thought of making like a 1/24, baja truck?

[@DoubleClutchProductions]

I have been looking at some options maybe, 🤙😎

[@jeffheald8228]

I'm on the same page, converting an scx24

[@josephcervantes6872]

@@jeffheald8228 I wanted to run some paddels but I can't find any, for such a small scale.

[@josephcervantes6872]

@@DoubleClutchProductions would love to see, want to build one.

[@jeffheald8228]

@Joseph Cervantes the 24th scale is growing a lot in popularity, I feel like it's just a matter of time before we start seeing more options

[@crash18732]

was a suggested video but thats a definite sick build

[@DoubleClutchProductions]

Thanks for watching 🤙😎

[@smokeysrc]

Love the painting tips that's going to be Handy great video 💯👍

[@DoubleClutchProductions]

Thanks man good to share info 🤙

[@wiccanfpv]

You done great man.

[@DoubleClutchProductions]

Thanks buddy appreciate the support and interest 🤙😎

[@mtrccrawler6300]

Siiick truck bro!!!

[@DoubleClutchProductions]

🤙😎

[@itsquick817]

Hey man knight customers makes a different ifs cover that makes the ifs not hang down as much, should look into it makes the ifs look better 🤙🏻

[@DoubleClutchProductions]

Yah I am not sold on it, its marketed to fit bigger tires but in my application it seems like it effects geometry negatively. If this was a crawler I would get it for sure 🤙

[@misokovalcik7621]

Awesome work i love it

[@DoubleClutchProductions]

Thanks for watching 👀 🙂

[@raymonde.tanneratomic-rc9370]

Looking sharp

[@DoubleClutchProductions]

Right on, thanks for watching 🤙

[@jeffheald8228]

Killer build man! Great job with the editing as well, I would imagine that takes just as long as the work on the truck

[@DoubleClutchProductions]

Twice as long adding video and editing, your so right dude but I do enjoy watching these videos later on as memories, appreciate you following along 🤙

[@shaunknysh2914]

I stack the green slime o-rings for bump stops but any shock O-ring stacked will work

[@DoubleClutchProductions]

Great tips, thanks for watching 🤙

[@EveryTongue]

Kit bash ftw!

[@DoubleClutchProductions]

Get er done

[@revsonsrc9573]

So sick 😎 can’t wait to see more

[@DoubleClutchProductions]

It came out great, cant wait to shredd

[@tayloru8282]

It needs some KCs now!!

[@DoubleClutchProductions]

Heck yes it does, I got a few more final touches, thanks for watching

[@LittleGrey]

Soooo clean! What seats are those?

[@DoubleClutchProductions]

Rc4wd PRP buckets 😎

[@rcvikingsnorway5912]

Im using regular blue grease for boat stuff on my o-ring seals and on my gears and transmission... For oil in shocks im using 10w5 oil specific for bike shocks.. Gets really goods response and movement in the shocks

[@DoubleClutchProductions]

Interesting 😎

[@anneellington8603]

Nice job man

[@DoubleClutchProductions]

Thanks man, it was a long one si thanks for following along

[@anneellington8603]

After I saw your video I had to subscribe, I love the content!☺😊

[@daddy9bot937]

awesome video!

[@DoubleClutchProductions]

Thanks for watching 🤙

[@DaneH64]

Damn that looks sick 🥵

[@DoubleClutchProductions]

Dope man thanks for watching 🤙

[@mitchrozelle269]

Tamiya black accent paint there clear over .It works great.

[@DoubleClutchProductions]

Great info thank you 😎

[@zachcooper2759]

Love Adam Savage!

[@DoubleClutchProductions]

Inspiration, just wish I could do these in one day lol

[@buickbob666]

This is a pretty sick looking build. Is this a kit deal? Or is this custom kit

[@DoubleClutchProductions]

Semi custom, element gatekeeper chassis with a rc4wd body and custom fenders and bits

[@bkorules]

Hey food for thought I'm not sure if it's element or third party, but there's a new front IFS kit out there to get better clearance but it's looking good man

[@DoubleClutchProductions]

I have seen that, I reached out to them for info and not sold yet on it geometry wise, I will peep it soon. Thanks for watching bro

[@bkorules]

Ah okay fair enough and not a problem loving the series

[@longhorn-alpencrawler]

Niceeeeeeee project ⭐️⭐️⭐️⭐️⭐️⭐️🥇🔝🏆🤜🤛🤝👌

[@DoubleClutchProductions]

Thanks for watching and the support 🤙

[@jimpen007]

Hi dude. Love this build! I just picked up a rtr Knightrunner and want to convert to live real axle. Can you tell me what gatekeeper and other parts you used in order to complete? Thanks in advance and love your channel!

[@DoubleClutchProductions]

I have a detailed video that will be live this Friday, Gatekeeper trailing arms and shock towers is a good start. Tune in this Friday

[@hsklar5941]

you've got to put on the skid plate thing that just came out recently to increase front end clearance. I forget who makes though. It might be knight customs.

[@DoubleClutchProductions]

For sure going to look into the high clearance knight customs ifs model 🤙 good info bro

[@hsklar5941]

@@DoubleClutchProductions these are as far as I can tell try and non try options.

[@ThreeDPrintDesigns]

This is so sick..

[@DoubleClutchProductions]

Thanks for watching 🤙

[@pain_inthe_bass]

Expensive work to go bash

[@DoubleClutchProductions]

Not compared to bashers, no shelf queens

[@pain_inthe_bass]

True that

[@Mudsuitable]

She's gorgeous 😍 where did you get the light kit for the truck?

[@DoubleClutchProductions]

The underglow/party lights are a Globact RGB light bar from amazon, the trucks headlights/taillights are rc4wd led kit for 87 xtra cab and the front bumper light bar is a gear head rc trail torch, thanks for watching 😎

[@Mudsuitable]

@@DoubleClutchProductions Thank You Sir!!

[@mikealexis]

Yes man that looks great

[@DoubleClutchProductions]

Pumped on how it turned out, thanks 😎

[@mikealexis]

@@DoubleClutchProductions For real...its on point

[@P1Mitchell]

Anyone have a link to that rgb light bar that he has underneath the bed?

[@DoubleClutchProductions]

Globact on amazon, I will get the link once I am home if you cant find it

[@P1Mitchell]

@@DoubleClutchProductionsFound it. thank you

[@rcplaytime]

bloody nice mate😀 wow👌👍👍👍😎😎😎😎

[@DoubleClutchProductions]

Right on 😎🤙

[@marasiganchannel72]

Great job bro , it’s awesome….subscribes done

[@DoubleClutchProductions]

Thank you for the support appreciate you 🤙😎

[@scottfordbrewer4380]

Use a emory board on the hood area to even it out.

[@DoubleClutchProductions]

That would have taken weeks with the amount of material that needed to be removed, I see your point but this was a,bad cast I think, good advise though👍

[@dailydrivenbaja2739]

Sweet!! 🔥

[@DoubleClutchProductions]

Right on 🤙😎

[@Chase.Hemmen]

Hey so sick want to build one for myself and was wondering were you got the IFS conversion kit.

[@DoubleClutchProductions]

Discontinued as far as I can tell, you can get the parts seperate but it was a kit from Amain Hobbies 🤙

[@DoubleClutchProductions]

It's a kit made by Element RC 👍

[@Chase.Hemmen]

@@DoubleClutchProductions ahhh darn ok thanks for letting me know

[@RYDENBMX]

Wish I could show you my bronco. Heatwave paint job too did myself

[@DoubleClutchProductions]

Tag me on instagram 🤙

[@CheeZyNutZ]

3:42 "BBBBZZSCHHHTD"😂

[@DoubleClutchProductions]

👍😎

[@CarmineRC]

Answering your year old question... I prefer the Losi O-Ring lube, with Team Associated X-Rings. I swear by the X-Rings, for keeping the oil IN the shocks!

[@CarmineRC]

In all my decades in RC... I've never tried E6000. Your enthusiasm is making me want to run out and get some!

[@CarmineRC]

Dude.... that turned out SO DOPE!! 💯👍👍🔥

[@DoubleClutchProductions]

I pretty much only use e6000, most durable adhesive I've ever used. And e6000 can be removed with patience.

[@DoubleClutchProductions]

👊😎👍

[@08carbonslvr]

Link for the party light? I need that in my life.

[@DoubleClutchProductions]

Globact on amazon, I will link that light when I get home if you cant find it

[@michaeltejeda9495]

just a curiosity Could you put a Full Metal Front and Rear Axle for Axial RBX10 Ryft 1/10 RC Cralwer, car improvement parts, accessories but let the comma be 2.2

[@DoubleClutchProductions]

I don't know because I have not seen the RBX10 Ryft axles but I think they are AR44 size? Thank you for watching

[@Imgonnatouchdre]

When putting the rear swing arms on should they be straight or have slight angle ?

[@DoubleClutchProductions]

Can you explain a little more?

[@polishguywithhardtospellna8227]

Never understood why we put grease into suspension, since oil is solvent to grease? How is grease supposed to seal anything? Same goes regarding mtb forks, the grease goes light, isn't easily visible where you left it, during consequtive service.

[@DoubleClutchProductions]

It's not in the suspension, grease is reacting with the rubber in the O rings keeping them from swelling from the silicone, it works very well compared to not using grease in o rings.

[@polishguywithhardtospellna8227]

@@DoubleClutchProductions So why aren't we putting fork oil into RC shocks to keep them from swelling? I wonder if this assembly grease going to mtb fork, has the same function? Cause if seals swell from most suspension oils/lubes, then that's pretty retarded design :-D

[@polishguywithhardtospellna8227]

@@DoubleClutchProductions Thanks for reply :-)

[@DoubleClutchProductions]

@@polishguywithhardtospellna8227 oil viscosity is how you tune RC shocks, if you could find the correct viscosity it would for sure work, O ring grease is older than mtb suspension or RC it's been around a long time, science and how materials react with chemicals is beyond my understanding

[@extec101]

if the cage is made of the thinnest brass tubes you coult solder it and paint it.

[@DoubleClutchProductions]

I did look into this, I might need to revisit this idea, good suggestions 🤙

[@mizlude92]

Who makes that color changing light bar?

[@DoubleClutchProductions]

It's a Globact rc light bar on amazon, I don't have the link at the moment. I will update the description with the link.

[@Dylan_5000]

1up racing o ring grease is the best out there

[@DoubleClutchProductions]

Going to have to give that a try, it's all the same stuff rebranded once you get enough of it.

[@Dylan_5000]

@@DoubleClutchProductions that is true but sometimes they change formula to project there product to be better in same way or form

[@DoubleClutchProductions]

@@Dylan_5000 🤙

[@fellmen2194]

you shuld do more of the track

[@DoubleClutchProductions]

I will, going to tear all the carpet out and show those scrubs how to build, I'm surprised the MTB community hasn't pulled those dudes aside yet 😎

[@motozack177]

Forgive my ignorance but what rc model did this start out as?

[@DoubleClutchProductions]

No worries man it's far from recognizable. Started as a Element gatekeeper with a RC4WD 87xtracab body and the rest is well...... Thanks for checking it out. More info on the other prerunner builds on my channel. 👍😎

[@burqueboy07]

Rad background music

[@DoubleClutchProductions]

White Bat Audio providing the tunes 🤙thanks for watching

[@rcboatgrnikolas5954]

VERY NOICE

[@DoubleClutchProductions]

🤙😎

[@mondospeedy3089]

Very nice, is it really for sale?

[@DoubleClutchProductions]

Anything is for sale 🤔

[@isawul00k]

ayyyyyooooooooooooooooooooooooooooooo!

[@DoubleClutchProductions]

Wasuuuup