Polishing This Trashed Black Paint To Life!

Griot's Garage G9 Polisher: amzn.to/3Lt3tSX
Chemical Guys Polisher: amzn.to/3F1bJaz
Griot's Garage 5" Backing Plate: amzn.to/3vuxVXq
Oberk Swirl Remover Kit: amzn.to/3DqqdA6
Malco Epic Paint Correction System: amzn.to/3vqsnfF
Adam's 2-Step Polishing System: amzn.to/3KVJ8Wz
Nanoskin Fine Grade Ckay Mitt: amzn.to/3ueg4n7
Optimum No Rinse: amzn.to/3uK8Isc
DISCLOSURE: Some of the links are affiliate links. The prices never change for you, I just get a small commission if you make a purchase.
Thinking about starting a detailing business? Checkout these guides:
📗 The Ultimate Guide To Start Your Detailing Business: bit.ly/3ax3Dtb
📘 The 8-services You Can Offer in Your Detailing Business: bit.ly/3mDy4Aj
- - -
// F O L L O W:
📷 Instagram: @detailgroove ( / detailgroove )
📷 Instagram: @propercareusa ( / propercareusa )
📺 Detail Groove KZbin channel: ‪@DetailGroove‬

[@propercareusa]

This paint is in terrible condition! But once you wash it, you remove a lot of the gunk and you’re left with a bunch of swirls. Very simple solution: cut and polish! I’m using the Rupes Cut with the DIY Pad and it finished down great. I could have used Oberk Cut and the same pad and get similar results. Don’t focus on what you’re using but how you use it. The skill is more important than the tool.

[@wrightvideos2011]

I agree skill is more important. But it’s sad some “detailers” tell me I’m a fake and not a real detailer just because of the brands I like to use

[@propercareusa]

Oh heck no! Just keep on getting great results with what you have 🙌🏽

[@chandlerbraaten847]

​​@@wrightvideos2011 the way i see it is. If it works, it works. Why change it? The end result is more important than the name on the product labels.

[@andy280]

​@@chandlerbraaten847 Bruh ,who cares about what labels do you use ,if the results are nice,nothing matters more This is why are tons of different polish on internet ,and you don't know what to chose It's like you go to a body shop market and ask for an polish can and one pad ,and they say ,what polish do you want ,we have 100 different polish cans here ... And the results sometimes are too smal to be noticed

[@ewa1970]

Don’t use car wash brushes with debris all in the bristles or drive thru washes

[@mason-cj5zp]

Tip- slam the polisher harder next time to leave some quality dents👌

[@xlrators5378]

Got to make sure compound isnt moving.

[@mdbeatzzzradio1485]

I'm a professional detailer an I used to work at a body dhop... it doesn't hurt it, it has to be a major amount of pounding, and he's using a bigger pad so it's way harder to dent it anyway

[@jorgeemilio5292]

Ussy

[@lucashurley7612]

That wouldn’t dented if you were using a rubber mallet let alone a 4 inch thick squishy pad😂 this is coming from a guy who’s worked detail and body shop.

[@reallydawg5987]

@@lucashurley7612lmao just he just wanted to say sum rubber not finna dent that metal 😂

[@tommygarcia6362]

My second job was at a body shop as a detailer. Loved it, learned a lot of tricks and still keep my rides clean on the inside clean on the outside

[@BillionaireMinds777]

Can you do give me some tips on how to do it at home? What product to buy and stuff

[@SoulforSale]

I am the best in the business but my vehicles are filthy

[@IJustSkitMyPants]

Put a dent in the door next time

[@GabrielGarcia-300]

Didn't even work the stages of cuts for the polish. Just basic job. He should have just used the rag. Probably charged a lot

[@mcharleymiller1291]

😂

[@Vixxen___904]

😂💀

[@daddys_slow5oh]

Was about to say the same 😂😂😂

[@daaneel]

@@GabrielGarcia-300 that car is a shit box can’t imagine someone’s paying hundreds to detail that. What he did made it look 90% better anyways

[@RougeComputer]

Bro spent $300 to recondition a $300 Chrysler

[@SoulforSale]

Sometimes I see a paint job like that and it speaks to me. I'll buff it for free.

[@Gesuspiece]

​@@SoulforSale complete waste of time and resources

[@SoulforSale]

@@Gesuspiece it's art

[@babatunde8812]

@@Gesuspieceit’s a 2 tonne vehicle capable of travelling at 3 digit speeds in comfort. Supply and demand in the car market be damned, in actuality any working vehicle has good value, if it runs it’s worth 2 grand in my eyes.

[@yobabydaddysdad8000]

It's worth 6-8 grand lol, especially the ones with the 5.7 hemi engine

[@chrisiwan]

Thanks for letting us know your products

[@d.phothirath5084]

"Bruhhh ! Look at this paint !? " 😂 ... dude looks n acts just like my buddy. Nice job 👍🏻 man !

[@xlrators5378]

Looks good from my house!

[@androidery1999]

Spray, Clay, and Walk Away that's the Billy Mays difference! 🤣

[@GAMECHANGER10.0]

Thats right that Decon put in work

[@medicinaljourney5505]

Great work, looks amazing.

[@mountainwarrior8387]

Too much time spent on a Chrysler.

[@kp3509]

😂

[@TriciaWilliams]

Bruh, I'm next!!!❤❤❤❤❤❤

[@Ara_Milan]

bro this content is very good

[@mattiaconza7994]

Hi cool video im a 17 year old from italy and i paint cars as my work i usually just clean it once but polish it first with a soft pad made from lama hair sorry im not good englishe😅 after that with the sponge pad to get the scratches of the first machine out and at the end wax it… i want to start my detailing Business in italy when im done with learning this job… are you polishing it just with one machine because you have to spare time or does it get directly a good or also perfect result? I would be much happy if you would reply and help maybe a little bit. I love youre channel and it helps me a lot preparing and thinking about my future. Tanti Saluti di Italia🇮🇹❤️

[@xlrators5378]

Cool story bro.

[@baileymah8163]

The dent in that door looks perfect to

[@INDIAN59598]

The banging though raised my heart beats.. But really a good work..

[@abbate2137]

Excellent work my man

[@SyphADL87]

No, don't encourage this.

[@cdc1544]

Thats exactly how I detail, these kids probably couldn't even wash their own car good job bro.

[@Chachi2uSIR]

I hv that same vehicle mines 07 Chrysler aspen I’m slowly working on

[@yobabydaddysdad8000]

Same🤙🏽

[@garnetgrenon8399]

Amazing work amazing videos and the bruhhhhh killed me 😅

[@michaelhinchey]

Clay has come a long way

[@AdiusOmega]

Now you've introduced a ton of hologram micro scratches that will show in direct sunlight! Perfect!

[@Sandiego61999]

How so

[@AdiusOmega]

@@Sandiego61999 Just a compound step to remove heavy scratches from paint will introduce much finer scratches on the surface which appear as "holograms" due to their nature, it's really just a TON of itsy bitsy scratches in circular patterns throughout. Shows up on darker paints especially flat black paints. Without a secondary polishing stage then it's highly likely you'll get them and they show up like a sore thumb in direct sunlight. Most detailers will just apply a layer of wax or ceramic coating to cover up the blemishes as it really doesn't take much to temporarily correct them. If you were going to lay down some PPF though you'd absolutely be foolish not to correct the holograms. I've seen cars come out of "reputable" shops with them and it's ridiculous how many detailers don't even know what they are. /rant

[@propercareusa]

I have 60 seconds to make a video lol. I have a full 15 minute video showing the process 😅

[@hellbentgarageog]

you have no idea what you’re talking about lol

[@ronaldhaugen5967]

Good work ,doing your method ,will it take water spots of black car ? I got them bad.

[@broncoramfan]

What brand clay mitt was that?

[@ava_rl4]

Love how the back door has zero "stains"

[@davidcaballero2740]

Probably was clean before. They noticed it was a great example to make a video and did it on that door

[@timwomack2656]

Man still has hell of swirls on I bro. Oh my bad that's my phone😅

[@frankb9175]

How was that blue towel claying? Please let me know got a black sequoia and swirl and rough feeling everywhere

[@matthewcollins9868]

Clay mits are waaay easier to use than claybars

[@LitSFC]

Get the rag companys clay towel theyre the best.

[@christopheradams5550]

take it to a professional

[@dontask824]

@@LitSFCWhere do u get them ?

[@kashmoney7421]

​@@dontask824 same place you get everything else. Amazon.

[@bryebaker3343]

What it’s that initial cleaning spray?? I’m looking for something good like that to use on my corvette and especially body parts I want to clean before installing or reinstalling

[@azharmunief491]

wax on…. now wax off… I understand now Master

[@lilbuddylee131]

Need that clay mit.

[@imathreat209]

Never seen it before is cool

[@J5ODK]

Clay mitt is usefull during the washing stage, to lift some of that persistent contaminents off the surface of the clear coat. After the whole washing process I'd recommend to use a claybar. You really smooth out the surface then leaving a smooth clean clear coat, free of I'd say 99% of contaminations.

[@brianjaycanlas5220]

Sheeesh rocking BPN. Go one more bb

[@Celaya831]

What type of clay mits do you use

[@robbyrob25x]

Maybe try finishing with #83 DA

[@MikesAutoDetailing]

Nice job

[@propercareusa]

Thanks Mike!

[@Zaiddddd128]

When he said “Spray,clay wipe of” I thought he was gonna say”spray,clay,slay💅”

[@josemanuelruiz2036]

Put the whole job!

[@nelsoncolon4480]

Once I use a sintetic clay and didn't like it I was leaving behind part of the rubber on the paint, don't know if it was the brand the clay lube or what

[@moejr14]

Best way to remove water spots

[@DJMEDIC671]

How do you polish when emblem badges are there. Especially if it involves taking fenders apart just get them off

[@NealDownBtch]

You must be a PDR GUY too… after you dent it up smashing the polish into it. “Hey look now that it’s polished you can see dents… I got you!”

[@TheMrPLewp]

How would you clean around the letters?

[@xXxZGixXx]

Yeah let's remove mud with a rag to make swirls I need to fix right after

[@Frank-cc7uz]

Lowkey i would be pissed if spent more than $400 and only got a waterless wash instead of a full foam soak and wash

[@BenDover-dv9wm]

Gives you the same exact results. The only possibility with rinsless washes is scratching, which gets removed with polishing lol. Good lubrication and you eliminate that problem. However, you could tell nothing else on the car was cleaned, and no one goes panel by panel like that, so this is likely just for the video.🙂

[@mackanarcon8460]

There’s a different video for that lol

[@BenDover-dv9wm]

@Scott Dove bud thinks hes qualified💀🤣

[@NATURALGAMING]

@@BenDover-dv9wmnope not true lol

[@BenDover-dv9wm]

@NATURAL GAMING explain how it doesn't lead to the same results. Please.

[@Bluejay67]

Does buff and polish really remove scratches or make them less visible

[@SoulforSale]

I've been out of the business for a while but can you still do a three-step compound polish glaze?

[@simonmirelez1103]

I would’ve used iron removers in my process but that’s my way

[@DJDooxx]

You guys rock

[@propercareusa]

Thanks 🙌🏽

[@user-vt5qk8qn9j]

They just a bunch of amateurs 😂😂😂😂 look at the way he’s hitting the fucking door I bet he didn’t know that was going to back fire on his ass

[@propercareusa]

bro is in his feels frfr

[@ramanpreciado2241]

Nice Aspen.

[@ODOGHOST]

what brand polishing compound do you use ?

[@Iegend17]

When you say polish. Is it compound or polish?

[@propercareusa]

On this video, I said polish but it was a compound. Using the word "polish" is more known and used than "compound"

[@williamwongus2873]

Where did you get the clay mitten from

[@chrisginoc]

So you used a 2 in 1 polish which cuts and polishes?

[@dewaroeplaysgames7547]

What do you use for cleaning?

[@SmarthPhonesCz]

He.. is the clay towel quicker/more efficient then clay bar?

[@skyeriku3194]

When would compound need to be used? I want to do paint correction on my black suburban but I'm not sure whether to use a two step or just polish it out

[@edg9567]

Do test spots.

[@knightmare234]

Whats the benefit of slamming the door with the polisher?

[@propercareusa]

aerodynamics

[@serendipity4740]

How many towels do you go through

[@alexsantana5377]

I polished my black car with griots complete polish and it left swirl marks. What is an alternative polish that won’t leave swirls on a black car? Thanks

[@Joeofalltrades85]

You didn’t get rid of the crap on the side where it says Chrysler 😂

[@propercareusa]

this is just a 60 second video. I have a full video on this car

[@billjonesnation]

You missed the joke.​@@propercareusa

[@Tokin_Alien]

I used to have a Chrysler aspen

[@tamarrabrown1206]

Can i use this on oxidation that isn't peeling? It's from the sun. Thanks!

[@youtubesuxjoggerdong4313]

What technique is the part where you wack it

[@prestondeapes6480]

Spreading the polish

[@Weakest_Bulgarian]

​@@prestondeapes6480Spreading. Not Hammering the panel like a goddamn jackhammer

[@Jomeze]

Beautiful!!! Great work Oscar!

[@propercareusa]

Thanks Johnathon 🙌🏽

[@GloriousJB]

What product do you use for clay lube

[@juanbustamante86]

Wash part, what was the product? Carpro Echo2?

[@PatrickJRoland]

Really surprised Chrysler never made another aspen

[@shannonwilliams8148]

It was the best SUV I ever had and I've had a Tahoe and now an Expedition, and I can honestly say the Chrysler is the best

[@JC-vk6ii]

Bro im surprised they ever made one period. 😂

[@erikarias5769]

It was basically a rebadge Durango

[@cadaver6829]

What type of polish do you recommend?

[@moyseappr]

What you use to clay?

[@mayjahkey]

Where do you get that instrumental ?

[@baddonkey75]

How do you get into this job, ive always wanted to

[@HEMi1995]

How would you go about getting in and around the emblems? Take em off? Or put some polish on a brush?

[@trollfeeder]

by hand or you can buy a polishers that is like an electric toothbrush to get the tough spots.

[@Ron-vl9xu]

Excellent job!

[@RayShinezMobileDetailing]

What do you clay with?

[@markdukakus7024]

oof that door ding get a local pdr tech in your pocket make some extra

[@roddyjack8]

Day and night different

[@sal87escobar10]

Overpriced for beginners results careful don't dent the door lol

[@bignigincoming8774]

Is there a reason we didnt use just water pressure alone to do the initial clean, you're basically exfoliating the truck with dirt by wiping it right away

[@ivanm9300]

If this is how you detail then I’d never hire you.

[@propercareusa]

oh no... im devastated

[@3litepker]

@@propercareusa you will be when you are losing potential customers and you limit your growth. As an average customer I wouldn’t want to see anyone smacking my door with a polish machine, or any part of my car for that matter.

[@medicinaljourney5505]

@@propercareusa 😂😂

[@medicinaljourney5505]

@@3litepker soft he barley tapped the car like holy crap dude do you even have a car.. there’s levels to things you don’t have to do everything the same way every time.

[@medicinaljourney5505]

On second thought I think you guys are mistaking what he’s doing for a whole paint correction. All he’s doing is polishing here it’s in the title.

[@mtvjackass74]

what brand do you use???

[@veracstrongvcs5806]

How can I remove Goo Gone from my car door?

[@pioneltapinessi947]

What the hell happened to the side mirror

[@propercareusa]

This car is in verryyyyyyyyy rough shape

[@DavidGonzalez-ud1mj]

I’d like to see that in the sun 😅

[@propercareusa]

If you know what you're doing, you'll get the same results. I was a mobile detailer for 8 years before I got a shop.

[@Saphronite]

Not going spray, clay and wipe away was a missed opportunity for sure

[@ifyouknowyouknow9664]

Love ittt

[@UnenthusedEnthusiast]

Chrysler needs to bring the aspen back. Base it on the Jeep Wagoneer.

[@BigWheel.]

So chrysler can have 2 cars filling the same market niche competing against each other and then also competing against the Suburban/YukonXL/EscaladeLWB and the ford expedition (which probably has it's own Lincoln sister model) they've been bailed out what? like 3 times? And pretty sure they're still the smallest in terms of market share of the big 3 American manufacturers? Sounds like it would lose them money, just saying.

[@MartinMora92]

Isnt a rotary better than those DA's??

[@ronbuchan1462]

what was the product?

[@bokdcutie]

Wax after polish right ?

[@TFUMEAN2]

Where do you get those rolling chairs?

[@IDK.312]

Amazon literally has anything and everything

[@dalegolemon5518]

What was the spray product?

[@chrisguzman7926]

Looks like ONR

[@MakingMoneyMedia]

1500 wets sand is similar to clay bar.

[@hoost3056]

Looks like a Chrysler Aspen......or a Durango that really, really tried. The doors sound like they were made at Home Depot

[@SC-ol1rt]

The guy on the side of the street that fixes my dents for $40 does a better job.

[@raylendvera4729]

what spray product is that?

[@Wooooptywoop]

Prolly APC

[@ajponch6767]

Is a clay mitt reusable? Or not

[@jackanderson2256]

How do you polish in between the lettering?

[@iStretchii]

I’m sure a professional shop would remove the lettering, polish behind it, then Reglue the letter with common strong adhesive

[@ItsMeYourRealDad]

Use a cotton bud (one of those things for cleaning your ears) the polish embeds in it and it picks up dirt really well

[@xlrators5378]

Toothpicks

[@hvivar3351]

It was just dirt 😂😂

[@bigturbost666]

there's an easier way to spread the polish/compound without slamming the door or any panel for that matter. I'd tell you to leave immediately if you banged on my car like that. Just use low speed and spread it like butter on a knife

[@uboii]

My truck still has good color to it(black 2019 Chevy Colorado) but I took the badges off. Can this process remove the left over outline of the words?

[@user-yv7xx6xg3k]

depends. sometimes needs paint correction. or goo be gone depends on how good you are at removing badges