ProPress Test Plug -- Pressure Test a ProPress System

Never heard of the Viega ProPress test plug? It's a fitting designed to allow you to pressure test an entire ProPress system before pressing the final connection. info.viega.us/blog/how-to-saf...
In this video Bo gives you a detailed breakdown on this fitting and demonstrates how to use it to pressure test your ProPress system and get you moving onto the next job.
Watch and learn!
Join our Community:
Facebook / viegallc
Instagram / viegallc
Blog: info.viega.us/blog
Viega Voice: www.viega.us/en/resources/vie...

[@drewd7824]

No mention it’s $40 for the 1/2 in. Test gauge. Only another $250 to dump into the $5K-10K for the tool and commonly used sizes for water n gas lines.

[@greenspiraldragon]

I want to see a burst test on the ProPress water fittings.

[@SilverCymbal]

Check out kzbin.info/www/bejne/h6XcpIWhgpaae6s

[@drewd7824]

Do you test pro press fittings with air or water?

[@drewd7824]

So what’s the PSI you test to???

[@user-kb5xx5td9o]

Does Viega pex-b need to be tested with water or can air testing be used?

[@andrewlipsett9944]

Do you make it in an air fitting too? It's less mess if there is an issue...

[@ViegaLLC]

Thank you for reaching out Andrew! A Viega ProPress is an approved applications for compressed air. You can learn more, here: www.viega.us/en/products/ProPress/Elbows.html

[@rustyshakleford5230]

I found the best way to use the propress is to pop the O rings out then solder the fittings then press the soldered joint. Best of both worlds.

[@PlumberWRX]

Do you actualy do that

[@drewd7824]

Belt n suspenders approach! 😂