2007 - 2011 Honda CRV Backup Camera install

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@daniellesashania7936]

How much is your price for installation ?

[@ambermiller8390]

Thank you so much for this video! I installed a backup camera to the reverse light *mostly* by myself this afternoon. My husband helped when I needed another hand, but your video gave me the confidence to dive in. In hopes it helps someone else: to get the wires through the accordion tube (the hardest part in the video), we used a plastic ziptie (just the flat part, not the square locking part) to fish the wires instead of using a hanger. We didn't need soapy water and completed that step easily.

[@Nimbus12]

Dude, that hole under the headliner is a NIGHTMARE

[@Nimbus12]

It helps to remove the screws under the trunk light lens.

[@robjodipayne2361]

Awesome video, thank you so much. Made it really easy for me to install the camera on my daughter's CRV.

[@roopdascoop]

Thanks!

[@ProvoBeastAudio]

Thank you!

[@nintendaholic1]

Thank you so much for this video! Followed it step by step along with the double din install and it’s all running smoothly!

[@samuelmitgang1963]

Amazingly well detailed video. Couldn’t have found a better one. Thank you.

[@SSloan-f2q]

Great informative video. Just changed the rear camera with second hand one in under an hour. Saved ££££ on garage costs.

[@deadtrollzzgz3472]

Hey if you don’t mind me asking since you done this already what do I connect the ground wire to? Because in the video he says connect it to the negative but I seen other say connect it to metal part

[@amauris1522]

Thanks so much for the great and detailed information. I thought that when you say that fishing the wires on the back was the hardest part, it was you exaggerating, but you were not wrong 😢

[@benchristensen1526]

Look, this video is great, and came at a perfect time for me. Just wish steps weren’t skipped in the footage. Trying to route the wire through the paneling now and I’m having to guess where the clips are and what needs to be removed

[@tessynha]

The rubber where you passed the cable. Where did you buy and water first come inside the car?

[@ZodwaMsibi-p2d]

How much backup camera for honda crv model 2007

[@aakudev]

Thanks! Only issue is I have had these sort of multiple ones being taken away, way easy to unscrew and snatch away.

[@JSICycles]

Great video. I will use to change out stereo and add reverse camera to my daughters 2011

[@davidbarnes2736]

Hello! Am I seeing this correctly? You need to connect the trigger wire to the power (using reverse light like you) AND connect the other end trigger wire to the purple wire off the radio? Do we have to have both ends connected?

[@dammcarl]

what type of wire did you use to extend the power for the short power power cable?

[@slappomatthew]

any roughly 18-14 gauge stranded wire should be fine. its nice to use red and black to keep the power and ground straight but color really doesn't matter as long as you dont forget.

[@platinoef332]

I got the situation that I had to replace just the camera and now it’s not working because maybe I got to reset the screen. Have you posted something about it?

[@matmanscott]

Well done explaination and video!

[@MarinoPortorreal]

Great video! How about the security pin code when you change the battery? Can you change it via the new stereo?

[@ProvoBeastAudio]

The security pin is only for the OEM radio, becomes irrelevant when replacing with a new radio. The pin is included with the factory radio in the user manual. If missing, call the dealer.

[@skywalkerallday4953]

Question not for this video, but was doing first car big 3 install and was wondering if the ground for the engine could be on any of the existing bolts

[@davidmoschkau7439]

Thanks for your video. I followed it but my camera doesn’t seem to work. I did not pull a power wire all the way to the radio as my system says it’s integrated into the video wire. There is a red tail wire at the end of the yellow video cord that connects to a wire on the radio. How should I troubleshoot this to figure out what’s wrong?

[@rueqi3335]

Thank you for your video. I follower your guide lines step by step to install an aftermarket backup camera with a build-for-2011 Honda CRV android head unit. I was so happy I had a backup camera to my old car now. But the next day, when I was trying to reset the android unit, the camera screen went black in reverse gear. Would you please advice? Thank you kindly. Happy New Year!

[@alexbeeston7964]

How bad would it by to cut a slit in that rubber accordion tube and pass the video cable, positive power, and negative through it? I'm about to give up trying to get it through the accordion tube. I don't care how it looks at this point, I'm just worried about the wires having exposure to moisture/air.

[@Techgeniusideas]

Great video

[@totokingkong1]

I have the same camera same radio same car I tried installing this camera but never got it to work. I connected to the rear back up lights. RCA connected. Red wire next to the RCA in the back of radio I tried connecting it to accessory+ did not work then I tried connecting to back up lights+ as trigger like you said not working. What am I doing wrong? There is a camera + wire should I use that? Im starting to think I have a defective unit

[@coelmiller7726]

Well explained, thank you

[@majhoolmaroof2065]

THANK YOU ..THANK YOU ..THANK YOU

[@naeemhallim3655]

Where you located

[@poxcr]

Why didn't you paint the bare metal left after drilling the pass thru hole? That spot will be prone to rust.

[@alekseyshurtygin2042]

I am about to start the same project. Was wondering if its ok to leave the hole as is without applying anything to prevent rust. Is there anything specific that I should be using?

[@unclefreddy2009]

I’m not sure it would matter much but you could apply some primer there if you want. He puts a rubber grommet over the drilled hole which will protect it.

[@chocc4564]

does the ac still works?

[@ProvoBeastAudio]

Yeppers.

[@mj3432]

Hi. What gauge is the red and black wire?

[@ProvoBeastAudio]

18 Gauge

[@musicman940]

Does your phone charge when plugged into the cable for Apple / Android car play?

[@ProvoBeastAudio]

100%

[@Crazyexperience19]

I was trying to do it, however after the steps i decided to stop, it will talk me like the whole day.

[@lect0n7]

My 2011 Honda CR-V’s aftermarket head unit is getting a Raspberry Pi connected to Video 1 in & it’s gonna play retro games…

[@phimonline3215]

Sorry to ask a question I followed your video to connect android unit for my 2009 honda crv . It worked great but only one part was hooked up the power and ground to reverse light as you showed in this video but whenever I start the car and put into reverse the fuse number 10 with 7.5 amp under dash will be burned out right away and all my dash light off, no power windows either and car can't start , shift gear stucked in park until I replace new fuse again. I have to remove those two wires I tapping into reverse light and everything will work fine again. Any idea that cause this problem. One more thing my tailgate light has some kind of pulse brake device tapping ino it. The 7.5 amp fuse that burned out is meter fuse. Thanks

[@ProvoBeastAudio]

Sounds like a short somewhere. I’d recommend visiting your local audio shop for assistance

[@phimonline3215]

Another question Do I need to connect a little red wire at yellow plug at camera to the red positive wire that connects to reverse light ? Do you think because I didn't connect it that cause a short circuit in my case? Thanks for your time

[@servingourlord]

Doesn't make sense, looks like you joined both pig tails to the power but if you did that you can't run the video to the front. Also at the front you mentioned a red wire a thick one and that wasn't showen in your beginning parts.

[@KentQuickstad]

I'm slightly confused by your question. On my camera, at the head unit (front) I connect the red wire to +12V ignition wire of head unit, and connect another wire (pink) to the head unit's reverse trigger wire. Then I connect the yellow RCA into the head unit camera in. At the back of the car, I connect the positive pigtail wire (it's red for me) to the reverse light positive, and the other pigtail wire (black for me) to the reverse light ground wire. I didn't join the red power + reverse trigger into a pigtail like he did for this video. Instead, I'm grabbing the trigger from the reverse light wire, and grabbing power from the ignition + off the head unit. Hope that helps.

[@alabbssi7188]

Hi sir I need honda CRV 2007 full option car install LCD screen send Ur no mob please

[@ProvoBeastAudio]

Not sure what you are asking...

[@RaduGiurgiu]

​@@ProvoBeastAudio Hello! He ask for your phone number sir...

[@phimonline3215]

Another question Do I need to connect a little red wire at yellow plug at camera to the red positive wire that connects to reverse light ? Do you think because I didn't connect it that cause a short circuit in my case? Thanks for your time