2007 - 2011 Toyota Camry Radio Install

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@Y-100FM]

I am not installing this radio, I am installing another one. This is the kind of tutorial that deserves a big THUMBS UP!

[@sirbeastly1920]

I dont even have this radio, i just needed this video to take apart that whole thing, worked perfectly thank you!

[@nathang4696]

Wonderfully done. Good instruction, camera work, narration, etc. Saving me numerous hours.

[@russell365]

My 07 v6 LE camry is still a great car at 160k miles, it just needed a few upgrades to keep it fresh and it'll get me another 140k I hope. I'd need a very good offer to even consider selling this thing. I can't thank you enough for the guide to disassemble this and provide knowledge on how to install my own kit. I'm infatuated with my own car, last 0-60 I did was 6.9 seconds. Not bad for a 17 year old sedan :D

[@wrenchesandcars5161]

Did you use any type of antenna adapter for this, I have a 2011 camry and am having a issue

[@aspected]

To install another head unit, would I need to get any brackets to mount it, or just the front fascia panel? I'm struggling to find brackets, but fascia units are everywhere. Would be amazing if I just need the front panel!

[@makinrahman4534]

do you have any problems with the radio itself such as the quality of the touchscreen or anything like that?

[@ProvoBeastAudio]

We always recommend a higher brand name radio for longevity and quality - Pioneer, Sony, Alpine, Kenwood etc. Our favorite radio: amzn.to/3z8L9Ju

[@gopherman2014]

@@ProvoBeastAudiois this one compatible with the car model shown?

[@irish89055]

Goodbye CD player.....

[@wrenchesandcars5161]

Do you use a radio adapter or the factory cable, I have a 2011 Camry and had problems getting the radio to come through

[@forgiven_lightofficial3732]

​@@irish89055 most cds are not even a stereo sound. Not missing much

[@LeroyMclovin]

Could you show how to get that 12v cigarette lighter out of that housing. those tabs are a nightmare and im not trying to break the whole thing. I bought all the stuff in your links so im pretty much doing the same installs

[@stephengrantham6776]

I seen there’s no portion of these videos talking about the hosa stereo breakout part you have listed in the description ( jack adaptor) what are you doing with it and where’s it go for what purpose?

[@MikeSumler-p3x]

This was VERY helpful! Thanks!

[@jeffdelany2676]

There was two antenna type wires. One was bluish purple. Do you know where that goes back to or what it is for I was thinking steering wheel controls.

[@JoseReyes-ee4km]

Following

[@michelleparkerguerrero3977]

Did you have to splice a female adapter onto to the SWC cable from the radio harness adapter? I don't have a female plug for the SWC cable from the Crux wiring harness to plug into.

[@cleanerhustle9969]

Helped me uninstall my after market pos Ken wood and put back the stock

[@matthewknasel2009]

What does "retaining JBL" mean? You mention it's needed for steering wheel controls, but is that all it's used for? I'm considering not using it alltogether.

[@MarkusLaumann]

JBL was a factory upgraded stereo system with extra speakers and wiring beyond the basic stereo system.

[@Jamellii]

The JBL amplifier with the upgraded sound system, if you don't use it then you're missing out on better sound. And plus these radios aren't designed to power the JBL speakers because of their low impedance so it's important to retain it

[@roymyers2858]

Is this the same process for the hybrid? the ac control is slightly different but the head unit looks identical

[@bryanrangel-almanza1435]

were you able to find out if its the same process for a 2007 toyota camry hybrid???

[@masify8632]

What's the measurement on the heat shrink? Also would the adapter work on any other radio?

[@forgiven_lightofficial3732]

Yes the adaptor should work as long as it's made for the vehicle.

[@prochocol_7779]

A very thorough and detailed video. Thanks a lot

[@ZOMBIE_SL4YER]

What if you put the amp in the trunk where should you ground an amp

[@steelsmerk9598]

Anywhere metal in the trunk 👍🏽

[@steelsmerk9598]

Just sand the metal

[@CH-sw1bg]

Great video! Made it a lot less intimidating!

[@m4x4400]

Did you guys bypass parking brake restriction since you didn't show any hardwiring to the vehicle?

[@joshpark1]

my camry has 2 antenna connectors (large white and smaller blue) and they don't fit into my new stereo. I didn't see that mentioned on this video, is my stereo the wrong model?

[@BlameZayy-o5p]

Ik for mine, the original stereo did house the white AND blue cables.. but for my new stereo you only need the white

[@jackzhu8635]

I bought all the recommended parts, including the backup camera, and had a shop handle the installation. The installer mentioned it was working initially, but when I arrived to test it, it stopped working. He restarted the system, and it functioned again temporarily. However, after I left the store, the system stopped working completely. I tried restarting the system, and it seemed to partially work once. But when I selected 'Android Auto,' the system became totally unresponsive and hasn’t worked since, despite multiple attempts to restart it using the power button and restarting the car. The screen is frozen, unresponsive to touch, and there’s no audio or radio. It simply displays 'Auto Source Disconnected.' I returned to the installer, but he was unable to resolve the issue and suggested it might be a software problem. Do you have any idea what could be causing this or any suggestions for fixing it? Thank you.

[@forgiven_lightofficial3732]

Internal short on the stereo unit most likely at the output stage

[@efrengarciasanchez5700]

Hi, I have a question. I've been watching your video. to make a change of radio to my car. I have a Toyota like yours and the module I use is different from yours. and mine does not work to answer calls on the wheel. In your car if I work this modular that you put.

[@alixandria7346]

How do you turn off the Map Voice I keep pressing the Voice Button and it wont turn off

[@chrstiano2497]

Will these parts listed fit for the XLE model Toyotas Camry..I have a 07 with the jbl factory amp and been watching your videos. Just can't decide on bypassing the jbl amp or not. Kind of wanting to retain with factory amp what would you suggest?. Bypass or retain the Jbl amplifier

[@ProvoBeastAudio]

Yes, and i'd see how it sounds before you bypass it. IF audio quality is terrible, then take the leap to bypass the amp (using our amp install video).

[@chrstiano2497]

@@ProvoBeastAudio alright sweet man I really appreciate the response 🤝🤟

[@pappascw]

@@chrstiano2497 Did you do this yet? I also have an 07 with JBL..

[@chrstiano2497]

@@pappascw yes I just ended up following his videoa step by step man and then sold the Camry a few weeks later lol

[@pappascw]

@@chrstiano2497 did it sound ok did you have to bypass JBL system??

[@scottyscarer]

I have a 07 camry where should i attach the amp turn on to the after market harness?

[@jamiesulle298]

PLEASE say more about hooking up the dedicated usb power supply 🙏🏼😬

[@jamiesulle298]

Figured it out🎉

[@djsodope6303]

How did you do it I’m doing this soon

[@jamiesulle298]

@@djsodope6303you’ll need an MFIC rated usb cable for your Apple play to work.

[@jamiesulle298]

@@djsodope6303you’ll need to add one of those usb charging adapters that fits in the cigarette style port. That part will stay behind the radio panel. Hope that helps.

[@jamiesulle298]

ALSO!! For Apple CarPlay to work you have to an MFIC rated USB cable

[@Augcliffe]

This video helped me understand how to install my stereo....thank you!!

[@jamesplayzroblox3143]

Does this also work on the old aurion?

[@escobih23]

so if youre replacing the JBL amp with an aftermarket one, would you connect all the wires together or leave the rears out like you did in this video sir ?

[@escobih23]

Hey sir how did you connect the RCAs to this radio from the amp? I know you didn’t do it in this video but in your other one with the 5 channel amp. I see no RCA slots on it so i’m confused.

[@ProvoBeastAudio]

This radio has RCA outputs. It's on a separate dongle which is how Dual Electronics decided to use them.

[@realdanieldavid]

I have one question. I’m planning on using a dual port type c dual port for the CarPlay/charging. I’m having a hard time finding the right 12v to 5v usb adapter you used in the video. Do you know where to currently get one? Thanks!

[@almalopez1585]

I had a new radio installed similar to this one, but it keeps going in and out camera goes off too. Would you know what it might be or why it's doing that??

[@ProvoBeastAudio]

camera going bad, or a short developing somewhere. One or the other (or maybe both). Check connections.

[@theowner9715]

Does this car have the amp under the passenger seat? My ac controls are different too.

[@ProvoBeastAudio]

IF there is an amp under the seat, that indicates you have JBL. No amp means no JBL. See the parts listed in the description based on your year and trim.

[@javiersalas7670]

I just had my 07 camry stereo replaced but now get bad reception...what could it be? Any idea?

[@ProvoBeastAudio]

Need to hook up the amplified antenna circuit to help boost reception. It’s a blue wire on either the radio harness adapter or the antenna harness adapter.

[@JoseReyes-ee4km]

Sorry I’m missing two parts, do you need to buy a antenna cable adapter or do you connect the old one into the new radio? Also, I quite don’t get the dual usb adapter, one cable goes to the radio but how do you connect the other cable or where?

[@ProvoBeastAudio]

No antenna adapter needed, OEM male Antenna plug fits aftermarket radios. Dual USB adapter isn't needed, just use a single one and connect it to the USB on the back of the radio. Dual USB was used where the second USB end was converted to a full-time charge with use of a 12v to 5v adapter. Single USB adapter: amzn.to/3gGHkms

[@JoseReyes-ee4km]

Thanks a lot!!

[@derekvandyke9981]

Does this stereo come with the harness for the JBL or does it have to be purchased separately?

[@anbesivam3]

My Aurion 2011 has factory AMP as well. After market unit is compatible with AMP?

[@ProvoBeastAudio]

Yep, just use the right link for JBL retention in the description

[@Th3GaMb3r]

Why didn't you show us how did you remove the 12v charging power 😭

[@108godfather]

It’s self explanatory

[@pappascw]

Will the Crux SWRTY-61J Wiring Harness work with a JBL system with Factory navigation replacement as well?

[@ikeliaalexander5723]

Can this work on toyota solara

[@maahir900]

So I did this to my Camry but out of no where the screen just went black and no audio was coming out and I was wondering if you could help

[@forgiven_lightofficial3732]

Ground disconnected due to bad connections

[@k.ctheking]

Right now I have my sub working and my front door and back speakers working it’s just the onley thing Im missing is a new stereo cause my factory I wanna take off but I want my steering wheel and subwoofer and speakers to sound clear and loud

[@mohammadgreen9125]

I tried to move the fader to rear speakers but the sound fade to off , and I connect the radio through canbus to the factory amp (JBL) is it normal or what ? and did i lost the surround system or it's normal and i just have to put the fader on center only ?

[@ProvoBeastAudio]

the OEM JBL amplifier only takes two channels of input from the factory radio, and the fader is done digitally at the amp, not at the radio. When replacing the radio, you lose the fader option if retaining the factory JBL amplifier.

[@mohammadgreen9125]

​@@ProvoBeastAudio Yes that's exactly what's happening , so is it ok or what and did i missed the surround system or it's working and i have to leave the fader on center and everything works fine.

[@ProvoBeastAudio]

@@mohammadgreen9125 Just leave it on center.

[@mohammadgreen9125]

@@ProvoBeastAudio Yes that's what i did , but what I want to know if did i missed the surround feature ? while the new android screen connected to the Amp through the canbus , and thanks alot for your response appreciate it.

[@codytebeest1596]

Hi, I purchased a Pioneer DMH-160BT radio and was wondering if all the products listed in the description would work with it. Vehicle is a 2009 Toyota Camry Hybrid.

[@ProvoBeastAudio]

Sure will!

[@markvngnz_894]

I can’t find a single touch screen radio with the matching jbl harness. I suck at wiring too

[@ProvoBeastAudio]

We can do the wiring for you. Send us a message on Facebook.

[@nxt.g8013]

link for the after marketing dash kit?

[@Homerunprophet]

I have the parts and screen I just am looking for rough estimate on install 100$ 200?300?

[@ProvoBeastAudio]

Oh you'd need to call around to your local audio shops. Lot of variables on price. Good luck to ya!

[@cryotus9070]

Did you combine the pink wire to the black one? I’m using the crux wiring with out JBL since my car doesn’t have it.

[@ProvoBeastAudio]

If the pink wire on your radio is your parking brake wire, then yes you can simply ground it. If it isn't the parking brake wire, we can help more if you let me know what brand radio you are installing.

[@cryotus9070]

@@ProvoBeastAudio Ah thank you. Yeah I just solder the pink wire to the ground and it works fine. Also I was wondering If the steering wheel volume up and volume down buttons can be used with this stereo since the buttons on my, 2009 Camry LE steering wheel, doesn't seem to work with this stereo

[@bandy5632]

Thanks! I used this to install my radio

[@escobih23]

so even if i’m not keeping the jbl amp i still need to use the jbl version of the harness? i’m confused as to why since i’ll have a different amp

[@escobih23]

@ProvoBeastAudio

[@forgiven_lightofficial3732]

I believe the connector is different for the jbl systems, pined differently. Would just get jbl harness.

[@dylanwilliams515]

Did you reinstall the antenna wires? Can't find a solid source for an adapter

[@noel.7691]

Great video, where did you put the GPS Antenna?

[@megatonesilva6546]

Great video.......too bad fit & finish is sub-par in regards to the Metra installation kit. Thank you for the excellent video. I will be purchasing an aftermarket 9" Android/CarPlay unit. The Metra kit killed my idea of using my Pioneer AVH head unit.

[@ProvoBeastAudio]

You're right, it's not the best design, but be careful with Android based units as they have a poor reputation of having terrible longevity and overall quality.

[@joshiopaz5615]

Great video!! helped me install my aftermarket stereo in my 2007 Camry w/JBL system. I connected the CRUX adapter. but I realized the Camry had 3 white harnesses but the CRUX only had 2 white harness. My Steering wheel control isn't working but I did connect the 3.5 cable for the sterring wheel control so I'm wondering if that 3rd unconnected harness has anything to do with it. What do you think?

[@LeroyMclovin]

did you get the crux model for with jbl? I dont have jbl so i got the "s" version and mine came with 3 white connectors. one was just for the rear speakers which im not going to use anyways. not sure what the jbl version of the harnesses look like

[@prochocol_7779]

Thanks for the detailed video. Thumbs up

[@savenification237]

how bout 08 camry hybrid ?

[@jayhawker03]

Just takes a google search

[@mflo713]

how did you retain the aux?

[@blizzy9625]

hello i did everything and mines doesn’t turn on it did once then turned off

[@ProvoBeastAudio]

Sounds like a bad radio, mistake in you wiring, or the wrong install parts.

[@roymyers2858]

Is it possible for me to install a dual xnav and just use the factory amp?

[@MrOntorius]

the only thing i gotta correct you on ... wire nuts are fine in an automobile, been hooking up radios since the 80s and they are fine. what you said, dont use wire nuts they are not designed for automotive application is absolutely false. only where there will be water or condensation is when they are not safe. they are totally fine on car radios, ive been doing it since the 80s.

[@CCGDude]

How do you find what dash kit it need for the specific car?

[@BazzyWasHere]

i mean i found mine by just searching "2011 toyota camry android radio" it should have results that pop up that fit it tbh

[@Kuucs]

Is this compatible with the OEM backup cam

[@aaronbarkus7436]

I need help. Can you please respond with my message. How do you make videos play on this deck? I tried everything and it won’t play. It shows up on the screen. I press play, but it still won’t work. Please, I need your help! And thanx in advance

[@jerrellmcfadden2465]

I came back a year later to see if you had gotten a response 😔 nothing… did you figure it out?

[@julian0310]

You are great with this videos thanks so much!!!

[@ProvoBeastAudio]

You are so welcome!

[@rags-fv6ko]

I’m getting ready to do this swap except I have a 2011 manual transmission Camry

[@hunterolson3744]

Did you do it successfully? I have a 2007 manual and I’m looking to swap it ojt

[@rags-fv6ko]

@@hunterolson3744 it came out successful just the steering wheel controls doesn’t work anymore…

[@egbunaifeanacho7510]

How can I contact you. To assist with reinstalling a set for me

[@ProvoBeastAudio]

Send us a message on facebook or instagram. You can also submit an install request on our website.

[@kennedyscheig3233]

hi i am getting a 2009 toyota camry and want to do the same thing with my car, will it work for mine?

[@ayebeegaray1224]

Yeah most if not all parts for 2007-2011 camrys will fit amongst each other

[@kennethmclendon7849]

I installed a BOSS head unit in my ‘11 Camry xle with jbl, used the same crux harness but when I set it to BOSS setting my steering wheel controls are all switched up. Volume down button skips track, etc. any suggestions on what this could be?

[@ProvoBeastAudio]

Try a different dip switch configuration

[@jayhawker03]

In the past I’ve seen that BOSS radios are really weird with SWC, if you have the opportunity it might be worth returning the radio and getting one from a more reputable brand.

[@martinbastida4882]

We’re u able to figure this out? I got the same problem

[@gordonweist3711]

When I removed the stock deck in my 2010 Hybrid Camry with JBL, there were 5 rectangle connectors and the two round antenna connectors... with the SWRTY-61J, only 2 connectors are now available to reconnect the new deck... what do I do with the remaining vehicle harnesses? and are they necessary?

[@ProvoBeastAudio]

They won't be used with the Crux, not necessary. Just depends on what options the aftermarket harness adapter is providing you. The Pac version uses 3 or 4, but thats because it is providing more options. You will be fine with the Crux harness.

[@orlandoperezacosta6437]

saludos tengo Toyota Camry 2009 puse radio tatil Android 11 pero no me funciona los votones del volante saludos ayuda por favor gracias

[@awb4life24]

Curious how you even got it back on with the factory brackets to the new radio. Having a problem with fitting on mine currently

[@ProvoBeastAudio]

if any factory tabs are preventing the radio to sit flush in the bracket, a hammer can be useful..

[@dandy22ful]

frist of all i would like to thank you for making it so simple i follow your video step by step and it wirks fine i use Crux61J for my camry that had JBL system it works fine but my aftermarket harnes dose not have a blug for steering wheel control it says on the instruction to connect it to SWC1 AND SWC2 which i dont know how to fiend them my after market radio is Sixtop Android 9 inch Car Stereo for Toyota Camry 2008 - 2011+Rear Camera & Microphone so please if you can help me to conect my steering wheel control i "ll greatly appriciate it thank you

[@rick252007]

I need help on this as well. 2011 xle withJBL. I HAVE AN eBay Android radio with built in steering wheel controls and don’t know which wires to tap into. Please help!!🙏🏾

[@michelleparkerguerrero3977]

This may be very late but I had the same question. I checked the instructions for the Crux and it says the following: For aftermarket radios that have wires for SWC connections, cut off the 3.5mm plug on the Crux SWC Cable and connect the SWC wires as follows:RED to SWC Key 1, WHITE to SWC Key 2, SHIELD to SWC Ground. Note that there are some radios that only have SWC1 and SWC2, in this case “shield” does not need to be connected.

[@obedleon1602]

How much cost for a 2011 Toyota camry

[@RashidAliyev]

Can you share link to Crux and JBL module?

[@ProvoBeastAudio]

Tons of links in the description of the video.

[@RashidAliyev]

Sow it. Sorry.

[@capcom6633]

Thanks for the vid! Stereo is in hand and parts ordered off the links you provided. I'll definitely be watching your video again once the wire harness arrives. Thanks again!

[@colt259]

How has it been holding up so far? Thinking about doing the same thing.

[@capcom6633]

​@colt259 Install was easy. Just make sure you have the correct w/h. I thought I had a JBL stereo but turns out, I didn't. Had to return w/h for correct one. Had no issues with return either. Good luck with your install

[@danield1915]

My 2011 Camry has factory JBL navigation, steering wheel controls, and factory backup camera. I am replacing the entire audio system. I have a question: What is the best way to keep the factory backup camera , steering wheel audio controls, and the factory USB/ 3.5mm?

[@pappascw]

Did you ever do this? I'm considering doing similar.. Not worried about the backup cam but the rest of it

[@BrianAstovi]

Will this work the same on a 2010 camry hybrid? I want to get a new radio so I can have a backup camera and navigation in the car itself, but I don't want to buy everything to find out its incompatible. My car does also have a JBL sound system.

[@ProvoBeastAudio]

Yep it should be the same parts with JBL. Linked in the description

[@optocane]

Can you explain how you installed the double usb to power?

[@ProvoBeastAudio]

Remove the power socket, put this in its place, connect the USB male ends to the USB inputs of the radio.

[@zroth_]

@@ProvoBeastAudio how do you remove the power socket?

[@assisalexandre2219]

Hello! My best regards from Brazil! Do you know If the radio of camry 2007 is the same till 2010? I wanna install a bluetooth in my car; in my radio there isn't It! I'm talking about original radio... Thanks a Lot! Sucess to this Channel!

[@geovaniwilliams7773]

Are you located in the tri state

[@ProvoBeastAudio]

Utah, actually.

[@hdtube99]

About jbl switch

[@86steelerfan]

How are you getting the rear speakers to play if you didn't hook them wires up on the harness?

[@ProvoBeastAudio]

The factory JBL amplifier only takes in two channels of input, and uses those two channels for all speakers in the vehicle (fader is controlled in the amplifier, not at the radio). That is why you don't connect the rear speakers in our video as the amplifier doesn't use those channels at all to produce audio for the rear speakers in the vehicle. Again, this is only in the case if you have the JBL audio factory system.

[@roymyers2858]

Also did this retain the SWC?

[@ProvoBeastAudio]

Sure does.

[@andywaterman1285]

Why are my rear speakers not working now?

[@forgiven_lightofficial3732]

I'd you have the jbl system, it would only be utilizing the front 2 channels if you used the non jbl harness.

[@kiltahja9792]

how much does this whole process cost?

[@ProvoBeastAudio]

Lots of variables there, depending on the shop, where you purchase equipment, labor, etc. If you buy from amazon, all parts we used are linked in the description. Labor (if done by a stereo shop) will vary place by place, and some shops require you to buy their parts to do the install.

[@olayinkaoyenubi8777]

Hi. I would love to install same on my '08 Camry Base Model. Can you help with installation? Can you also help program original key with remote as mine didn't come with remote control?

[@Homerunprophet]

How much would it cost to have this done? Roughly

[@ProvoBeastAudio]

Well, we linked our parts used in the description which will show the price of parts. As for labor (if you don't do it yourself), that will vary depending on what shop you visit.

[@cookwtf]

I wish it wasnt an arm an a leg to get this done to mine 😔

[@Th3GaMb3r]

Does a 7inch screen stereo double din fit?

[@k.ctheking]

How can I make my subwoofer sound louder and my rear speakers sound clear with factory radio

[@ProvoBeastAudio]

DSP if keeping the factory radio with a new aftermarket amp and speakers.

[@michaelvella8511]

I bought one from Losing and it only lasted 3 years

[@The-Drone-Hobbyist]

I want this installed in my 2010 Toyota Camry. (I would come to you and pay good if I was near you)

[@k.ctheking]

Same i have a 2010 Toyota Camry I want this in my car

[@Kountryboiprod]

I can

[@TalkthatMattas]

I this screen better that stlyles ones that are popular now

[@Naypa11]

Kinda useless if you don't do a face up of WHAT PLUGINS GO WHERE.

[@jankijan8004]

Everything way too expensive!

[@michellelee8144]

Omg… I think I’d rather get a different car rather than go through all that shit… lol

[@ProvoBeastAudio]

Or just pay a shop to do it for you.

[@Th3GaMb3r]

Does a 7inch screen stereo double din fit?

[@ProvoBeastAudio]

Yes, any standard sized double din (regardless of screen size) will fit great.

[@Th3GaMb3r]

@@ProvoBeastAudio thank you

[@Th3GaMb3r]

@@ProvoBeastAudio thank you