Proxxon FET Feather Boards

ProxxonFET from Proxxon
Feather Boards
Proxxon FET 27070
Playlist with all my videos
• Harris Knudsen
www.harrisknuds...
#proxxonFET #proxxon

[@bastian6173]

You abandoned the riving knife, right? It's a pity. The riving knife is like 1,1 milimeter and the 36 teeth blade is like 1,6 milimeter :( This way it cannot work. But seems with the feather board is quite safe

[@francesco6150]

Good morning, I wanted to know where I can find this small finger presser for circular saw fet 27070. Thanks and congratulations for the very interesting videos

[@Harris-DIY]

It is from a cheap milling table I bought many years ago but it can still be found online kzbin.info/aero/PLo4W2syiAHwAazeX8jfKCIBax5ybwwbFx

[@francesco6150]

@@Harris-DIY Thanks for answering me.

[@espenbgh2540]

Fine instruktive videoer

[@Harris-DIY]

Espen Bøgh Tak

[@VicT992]

Great video. Where can I purchase these feather boards from?

[@Harris-DIY]

Nikki Thanks for your comment, I bought a cheap milling table as you can see in this video kzbin.info/www/bejne/Y5amhn-Mr9SpnZo

[@riccardomoni3598]

Could be possible to use circular blade that is for max 6000 rpm?

[@Harris-DIY]

I have not tried but since the saw runs at 7000 rpm I would not recommend using a saw blade that is only intended for 6000 rpm.

[@riccardomoni3598]

Hi, could you send me addres to buy the yellow jig? I do not know the name in English..thanks

[@Harris-DIY]

You can find them on AliExpres or eBay, just search on Feather Boards. Here you can see where I have mine from kzbin.info/www/bejne/Y5amhn-Mr9SpnZo

[@cedricwoodhall6405]

What size T bolts do you use in the FET mitre slot?

[@Harris-DIY]

Cedric Woodhall There are m6 screws where the head is cut off and then there are soldered m6 Sliding nuts on

[@nicoriparipanico1551]

Buonasera, la seguo spesso perché ho anche io parecchi attrezzi proxxon. Vorrei avere un'informazione su dove comprare il distanziatore (se così si può chiamare) per la mia Fet. Grazie.

[@Harris-DIY]

Thanks for your comment, they are from a cheap router table that I rebuilt, you can see it in this video kzbin.info/www/bejne/Y5amhn-Mr9SpnZo

[@francesco6150]

Saluti, mi associo anche io, in quanto come Lei ho attrezzi proxxon e con questi anche la sega circolare 27070 fet, sono alla ricerca di questa "guida a pettine" piccola per la base della macchina 30x30 , difficile da reperire. Saluti

[@steveho9884]

How about dado head on oproxxon

[@Harris-DIY]

You can't buy a dado set for FET and the saw isn't made for it either, in my opinion it doesn't have enough power and the shaft isn't made either so more saw blades can't be secured well enough either. I have made a simple experiment with two saw blades Proxxon FET Dado stack, can it really be done kzbin.info/www/bejne/lZDUiqOgnMt-fZo but it's not something I can recommend.

[@Harris-DIY]

Here you can see where the feather board came from kzbin.info/www/bejne/Y5amhn-Mr9SpnZo

[@sandosando8428]

hurts the motor

[@Harris-DIY]

How could it damage the engine?

[@sandosando8428]

So tight at both sides

[@Harris-DIY]

There is no pressure on the saw blade. One of the reasons to use Feather Boards is to avoid the blade squeezing and making setbacks.

[@unodos7150]

hej hokdk1. Kan du fortælle mig, hvor man kan hente de Feather Boards fra videoen? tak

[@Harris-DIY]

Uno Dos Hej Du kan finde dem mange steder, jeg har set dem på EBay og AliExpres. Den jeg har brug er fra et billigt fræsebord som jeg købte hos Harald Nyborg for en del år siden og nu har bygget om. Harris

[@unodos7150]

Mange tak for din interesse. Jeg vil kigge efter det på AliExpress. Dine videoer er meget interessante, hold det op.

[@Harris-DIY]

Uno Dos rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F264557573587 Det er det bord hvor jeg har mine fra.

[@unodos7150]

Mange tak for ulejligheden, jeg vil prøve at købe det. Jeg er en amatør, marinemodellering af Spanien, og dine videoer hjælper mig meget.

[@joaopacheco3690]

wrong cut skills. Prone to kickbacks and/ord getting cut