PS4 PRO WALL MOUNT DIY TUTORIAL FOR LESS THAN £5!!!

PS4 PRO video of HOW TO make a DIY wall mount for a ps4 pro for less than £5 and under 15 mins! Anyone can do it and if you follow my video you will have your ps4 pro up on the wall in no time! Don't buy expensive wall mounts when you can make one the way I did mine for less than £5!

[@benbriggs5477]

Ah mate you have just saved my ass needed a wall mount for an entertainment room and wasn't paying over the odds cheers again mate

[@mikeyellow]

Great. I just made my. Thank you so much mate. Great video.

[@DB_Videos275]

That’s really good If you have any ideas/tips for Xbox one (first gen fat model) that would be a bonus 👍

[@nepyeverythingismylifewith9310]

Te felicito por tu vídeo desde Argentina. Te agradezco me ayudaste mucho.

[@Massondave]

¡Muchas gracias! por favor, como y suscribirse para más videos útiles para venir excuse my google translated reply!

[@jeffersonmendieta3603]

Hola por favor me puedes decir cómo puedo conseguir esas plaquetas para mí PS4 pro

[@ibbzi5487]

Hey mate I am looking for that exact setup : the soundbar, tv, console all wall mounted. Could you perhaps make a video of how you cable managed it?

[@Massondave]

Ibbz I will try get something together for you 👍🏻

[@berniceramirez5591]

i have a ps4 pro 1TB what size screws and what kind of angles will i need to mount it?

[@trixietheopawslife8232]

Can you tell me what the name of those bracket?

[@ChiefWiseEagle]

Bracket measurements please

[@brapsikelph]

Anyone can share the scree size? I really cant read it when it was zoomed :(

[@pierrexavier4983]

Great video mate but one thing you forgot “SIZE OF SCREWS” that way when we go do it we’re not guessing would of gotten a lot more likes if you put “sizes”

[@Massondave]

Pierre Xavier hi, thanks for your comment. I did zoom the camera into the size of the screws and nuts label on the packet. All the best

[@Massondave]

Pierre Xavier hi, thanks for your comment. I did zoom the camera into the size of the screws and nuts label on the packet. All the best

[@pierrexavier4983]

Agreed but when you zoom in it does not show

[@Massondave]

Pierre Xavier must be the video quality when the video was uploaded to KZbin. Any questions of screw sizes I can help with just give me a shout 👍🏻

[@a_sophistiratchet]

@@Massondave thanks. Can you give the screw size then please?

[@psilocybepariah769]

Do the screws that slide into the ps4 damage the shell at all? Of course they only would be purely cosmetic if they did...

[@Massondave]

PSILOCYBE PARIAH no mate they dont cause any damage at all!👍🏻

[@MrPakaplog]

size of nuts and bolt please..... your work is very nice, i have a PS4 slim and i like to put it in my wall too. i watched your video but i could not see the size of the bolt and nut. thank you....

[@Massondave]

MrPakaplog Hi, the sizes of the nuts and bolts for the ps4 pro are 3.5x12mm machine thread screws. Because yours is the slim version I think you will need a slightly different size, can you measure the size of the slot that goes around the console and let me know how wide it is in mm and I can tell you which size of nuts and bolts you require? Cheers mate

[@MrPakaplog]

is it the ps4 slim and ps4 pro the same in size? the only difference is the ps4 slim comes with 500gig to 1gig, by the way thanks for the info. sir, i will measure it .... Big thanks sir

[@ML5Photo]

Can you do this with a PS4 slim version

[@Massondave]

ML5Photo it’s the same principle as the PS4 pro. All you need to do is measure how Wide the slots are on the side of the console and that size determines what size of nut you need to use so that the console can slide onto the brackets with the nuts fitting neatly in the slots. Let me know how you get on, cheers 👍🏻

[@josephlavrich3617]

What are the bolts or screws you put into the wall called?

[@Massondave]

When you can get access to the woodwork behind, just any full threaded screws will do but if it’s just plasterboard then you will need to use plasterboard wall anchors. Hope this helps

[@prince_Creation_edits]

Can we play games

[@markangeloranay6083]

Anyone tried this? Cause I'm worried about using a metal bracket, due to the heat coming from the unit and may melt the plastic part

[@Massondave]

Mark Angelo Ranay the heat from the console 100% won’t heat the metal and melt the plastic, I had mine like that for 2 years and it was totally fine.

[@KanesDesignsKaneP]

Hi what are the brackets called please? :)

[@Massondave]

Kane Designs here is a link to the brackets from B&Q www.diy.com/departments/silver-effect-steel-angle-bracket/243273_BQ.prd?icamp=recs&rrec=true

[@KanesDesignsKaneP]

thanks!

[@ivangustin1202]

is it just me or there's a face shadow on the ps4 @9:04?

[@Massondave]

Ivan Gustin I hope not!!😂😳

[@nobaccos]

lol

[@AlexiaVon]

all scraped up, metal on plastic

[@Massondave]

Virtual Reality it shouldn’t scrape up, if you have the correct size nuts and the brackets are spaced correctly the PS4 should glide in and out of the brackets. Any questions just give me a shout