PSA! Radiomaster Ships ExpressLRS at 1000hz Packet Rate! Make It Lower For More Range!

PSA! Radiomaster Ships ExpressLRS at 1000hz Packet Rate! Make It Lower For More Range! - FPV Q&A

Рет қаралды 4,229

Joshua Bardwell Livestream Clips

Күн бұрын

Пікірлер: 38

@Todd_G_FPV Ай бұрын

I run 250hz on 250 dynamic power, works great!

@mawi435 Ай бұрын

isn't there a bug on edge tx with the dynamic power settings, except in their new version, think I read this in the changelog...

@mawi435 Ай бұрын

no can't find anything, I was wrong there was no bug.....

@Todd_G_FPV Ай бұрын

@mawi435 was going to say, I've never had an issue I'm on 3.x

@mawi435 Ай бұрын

@@Todd_G_FPV found it, was on expresslrs github, but was a rare bug...

@tito9107 Ай бұрын

I have benefited from your anger.

@VlaViRus Ай бұрын

I started my FPV journey just last year. And a year ago I just got my new shine radiomaster pocket, right after it's launch, that replaced betafpv lightradio3pro for me! So I went to the field, to train there with my 5" Nazgul, and it's crashed due to failsafe just in 100 meters away from me, thanks to this packet rate setting)) To that time I have no idea about the packet rates, especially on the radiomaster defaults. Thanks to the local community - they said me to check the packet rates after I asked them how could that failsafe was possible. But I destroyed my first battery, coz nazgul falled down on it from 50 meters. "Thanks" to the Radiomaster for their defaults. Sadly this video came here right year later than was needed for me to avoid that :D. TY JB!

@PIDtoolbox Ай бұрын

Thank you!!!!!! I totally agree

@aech.4.2 Ай бұрын

Broooo, im a noob and ive just benefited from your anger, thanks.

@AllinFPV Ай бұрын

I can’t even feel the difference between 250 and 150hz and 150 gives really amazing range on 1W

@uzer12387 Ай бұрын

That's part of the many details which make it hard to get into this hobby. Not hard to understand, but here are simply way too many small things to learn

@0TheRain0 Ай бұрын

I run 50hz for mid-ranging and it's tops 😊

@chrisxcr Ай бұрын

My Pocket came set to 250Hz by default.

@Spacecazeka Ай бұрын

yeah i had RX loss on my tiny pavo20 not too far from me because of this, i changed it and it is much better, for sure 03 video link goes out before RX link now

@scole901 Ай бұрын

i had drones that would not bind to my zorro, happymodel said change to 250. now everything works.

@ThrashFPV Ай бұрын

I built a tinywhoop for my dad and he got a new radio and i couldnt get it to bind because i was used to 250 hz on my radio and didint even know this. Took forever to figure out and really wish it wasnt sent like that. Everything worked when i set it to 250

@Eddastuff Ай бұрын

250 250 dynamic FTW

@laddn17 Ай бұрын

Mine was 500 on zorro and I put it to 150 , no issue here either :)

@robertdozier8765 Ай бұрын

Is that an ExpressLRS folding antenna on the Boxer? If so, could you please provide a link to it? Thanks!

@NathanHickeyP Ай бұрын

They probably ship it on 1000hz because fastest is the bestest. haha

@typebin Ай бұрын

there is no such thing as bestest. use goodest instead.

@ugpfpv361 Ай бұрын

Yep, I see people on reddit all the time telling noobs to switch their packet rate up to 1000 just because "faster must be faster" because it will feel So much better😂

@chipgoode9515 Ай бұрын

I jumper T15 shipped at 50 Hz. Maybe they are better than master lol

@OnelastgoTV Ай бұрын

Mine came with 250 default in the uk

@FREEDOMFPV84 Ай бұрын

Where did you get that antenna from thats on your radio does it work better then the stock one

@CDRaff Ай бұрын

I have seen this come up on Reddit from time to time, but didn't know why it was happening. This is also probably why I almost always get push back suggesting that they change it; they are assuming that Radiomaster sent the radio out with the best settings and some dummy on Reddit is telling them they need to change those default settings which would feel off to a newbie.

@ooOoo..... 28 күн бұрын

Lmao @ 1:44

@TechnicallyTom Ай бұрын

Is this a RadioMaster issue or ELRS issue? Remember, all these settings are unique for each model number. The packet rate value is saved for every model number. Is RadioMaster picking the default values or are the ELRS devs choosing them?

@NoNamehere- Ай бұрын

What would be the range on a 330 hz

@nikhilupadhayay940 Ай бұрын

Which antenna is that on the boxer which jb is using can someone tell me

@AITullball3333 Ай бұрын

1000Hz really is unnecessarily high, even for racing.

@jonahbranch5625 Ай бұрын

It's because big number better

@joshuas2716 Ай бұрын

Could setting it to F1000 reduce time it takes for a receiver and TX to "bind"? If I remember correctly, the RX first tries to find an ELRS connection with the packet rate that it has saved (which is typically the last packet rate it used). If it doesn't establish a connection, it starts cycling through packet rates. Does it start at F1000 when cycling through packet rates? If so, that would ensure the connection time is minimal. I think Radiomaster should set the packet rate to 100 or 333 by default. That will provide more range than F1000, but work well with drones AND work well the switch configurations that give full resolution aux channels for PWM receivers.