Pulled an ALL NIGHTER to Finish the Pulling Truck! LOCKED AND LOADED!

See guys at the pulls! midfltractorpullers.com
ALL MERCH MUST GO! USE CODE “25off” for 25% off site wide, plus all Blue Collar Shirts are priced down! Visit brucewilsonshop.com
Subscribe to my second channel! @brucewilsontoo4879
Check out Clay’s Website! www.babbindustries.com
Be Sure to check out our supporters!
Fitzgerald Peterbilt for all of your BIG RIG needs! fitzgeraldpeterbilt.com/
Green APU for the best comfort in a big rig! greenapu.com/
Buy Truck Wheels buytruckwheels.com/
Diesel Auto Power for all of your Automotive diesel truck needs! www.dieselautopower.com
Truck Trailer Pro for your Truck and trailer supplies! www.trucktrailerpro.com
Renegade Products for your Vehicle Polishing and Detailing needs! www.renegadeproductsusa.com/
Lifetime Nut Covers!
lifetimenutcovers.com
NEW MERCH!!
brucewilsonshop.com/shop/
Sunglasses I wear!
glnk.io/n86p/bruce-d-wilson
Use code BRUCE10 at checkout!
Jump boxes
jbtools.sjv.io/brucewilson
Use code BRUCE15 for $15 off your next order of $150 or more! A !!
Looking for equipment? Check out our website!
buyatractor.com
Follow us here!!
SNAPCHAT- bluecollarbruce
INSTAGRAM- bruce_d_wilson
FACEBOOK- BRUCE WILSON
Hit the like button and comment!!!
Fan Mail, Send Too
12410 US HWY 301
Dade City, Fl 33525

[@philgrimsey3637]

I honestly don't understand the haters who try to rip into Bruce. Far as I'm concerned, he's a legend. In-between running a business, being a father and a partner/husband, he turns out content like this. Keep doing you, man.

[@dunbarjenkins1715]

They're just jealous bud. Fuck the haters!! Bruce, keep on keepin on!!

[@robertwitcher5113]

Preach too em, some folks can’t stand for someone else to have more than them. Point blank periot!!!!!

[@DawesyD]

I think some people (myself included at times) rate Bruce that highly that when he does something that could be considered silly or for views people get the shits that he is trying so hard to get views. I have been enraged with some things he has done. However I understand that he is just trying different things to boost his channel. And yes it’s his channel so he can do what he wants. I’ve been close to unsubscribing in the past then I calm down and realise…. It’s his channel and it’s really not a big deal so I check myself then watch his next video as he can do whatever he wants. He doesn’t need anyone’s permission… well maybe his wife’s ha ha. You are absolutely correct. He achieves so much with work, family, KZbin content. I would love to have his passion and energy. Keep up the great work Bruce.

[@colesteven1123]

@@DawesyD shiiiii she's too busy pumping out OF content

[@rileygarrett3551]

@@colesteven1123 u would know

[@brandonfloyd6321]

Glad you checked the wiring. Melted pistons wouldn't be a fun time. Lol

[@user-zo1os7cv7w]

Hello Mr. Wilson, I admire your work. You are amazing. Mohammed Al-Bayati from Iraq

[@jasonmirabile5184]

I can watch videos on this particular truck all day long. Its the baddest truck Ive ever seen

[@andrewwolfe5965]

So glad you swapped those injection wires back!

[@scrotiemcboogerballs1981]

Good luck with the pull hope it wins and nothing breaks thanks for sharing looks great

[@jamesseley4885]

Trucks looking good. Good luck pulling hammerdown.

[@TheJohndeere466]

Im not too up on semi pulling but I do know a little about tractor pulling. Pulling tractors usually run aluminum pistons and require you to run water injection in the intake manifold to cool the pistons. If you dont you will instantly melt your pistons with a big turbo and a lot of fuel. Our tractor will use about 1/2 gal water injection in a pass. I know some cummins semi engines have 2 piece pistons and the tops are made of steel so they will probably take more heat but Im not sure if cat engines have these steel piston tops. Pulling tractors usually run advanced timing but you have to be careful you dont advance it too far to where the fuel is firing out of the bowl in the piston or pistons and liners will be torched.

[@POLARTECHED]

Wow those drill bits made mincemeat of going through that frame! I reckon I need some on them in my life 😂. Good luck at the pull shame we don’t get stuff like this as much in the UK. Loving the look on the pulling truck.

[@TierManDag]

Can’t wait to see her rip, it’s gonna sound sick. 😏 Let’s be honest, that’s drive shaft loop ain’t gonna hold 😂😂😂 hopefully you don’t need it.

[@lamarbeachler7738]

Did you Pass safety with that drive shaft hoop

[@BubbaIXI88]

that truck lookin good, yall.

[@dackerson5]

Hey Bruce, crap happens. Glad you were able to fix it. Can't wait to see it pull.... Yank the sled down the track! Good luck. I also have seen where the guys will spin the 5th-wheel the opposite way... put the ears toward the cab.... you will have pressure against the plate

[@lloydrobinson7081]

kool clip, keep them coming

[@mattcoy2817]

Always check the bottom of the axel tube were the bearing ride's for were and the wheel hub doesn't share oil with the center diff

[@benjaminstockton3917]

Awesome job Bruce getting the pulling truck ready .I appreciate the videos buddy. Appreciate you buddy 👍

[@tbchristie6962]

Unleash the beast🤘🤘

[@DrDiff952]

You never see a pulling tractor working the fields!

[@Calryan704]

I think its really cool seeing Bruce taking that axle apart knowing exactly what hes doing since last week i learned how to take one apart in college. Love seeing him having the same troubles with the hub and everything!!!! Hyped to see the truck in action bruce!!!!

[@L.A.Concrete]

Bring home the W ole son🎉🎉🎉🎉🎉

[@michaelblackburn5418]

These videos are so dang long I’m trying to watch but dang I keep falling asleep 🤟🏻

[@mfcjr1]

It is looking good. Good luck!

[@SearchingForPurpose]

I need that rivet gun 🤣 that's sick, I hate having to use the old hand job riveter lol

[@davidanddiana7173]

Cool video man 👍

[@tuckerwicks7337]

Great video

[@Mfullen09]

Hope things go well, can’t wait to see the video. Thanks for sharing your adventures with us.

[@gregfields4311]

Half ass way is your only way from what I see!

[@Reid0225]

I’m so glad you started doing longer videos with some real meat in them.

[@kennethperian4370]

Yes great job showing telling, keep up the good work go wash that truck get it ready. And have fun like I did when I lived there in my I was about 23or24 somewhere about nice town.have a good one see ya next time see ya bye

[@frankhanes8005]

To bad I’m heading to your state in 3 weeks for two weeks of vacation with the family would of loved to go see you pull at a truck pull down there good luck and can’t wait for the video of you pulling

[@zinrichards9141]

Well, that’s even cooler. Your thing moves.

[@jamiesuejeffery]

In the last video I thought to myself, "The timing is off. She isn't hitting on all cylinders, and could actually do some damage." I'm glad you got it fixed.

[@countryboyscooter3402]

Be easy with telling the truth, some people get butt hurt and cuss you out for not being a real Mother Trucker!

[@cs-gj3yf]

its not fixed, the ecm needs retuned for the sensitive injectors, when you have sensitive injectors and a super strict ecm thats made for a certain pulse rate then its gonna do that.

[@NoahAnsell]

Glad to see it’s running better! It sounded nasty in that last video lol

[@alanmacintosh9461]

Was a great thanks Bruce

[@justinfreeman6091]

Ryan and lake look a lot alike. They must be brothers!!!

[@Kodi5204]

The other guy that was a truck master mechanic didn’t know you couldn’t swap the injector plugs doesn’t sound like he’ knows much

[@alxgu198]

Well done for acknowledging you made a mistake with the harnesses the wrong way. Not everyone would admit it. You’re the bigger man 👍

[@mahatma171]

Thanks I’m glad you fixed the harness. I understand the choppy idle, that isn’t what I heard last vid. Thanks for acknowledging it too, honestly didn’t wanna see you run it like that.

[@mju7752]

You always own your mistakes Bruce, fair play. Those rigs are both gorgeous in their own right. Have a smashing weekend pulling.

[@chriscook8076]

Good luck!!!!

[@brandoncarden6293]

Nice truck brother

[@Diezeldawgdog]

It’s running nice now

[@edwardstephens247]

While the hub is off, replace the brake shoes!

[@treya2403]

Good work man!!! Looks great and you should give your guys a big shout out for grabbing a gear with you and helping get that unit ready for the show

[@18brash]

You got to get cleetus to experience sled pulling maybe get him addicted to this great motor sport as well

[@Steve-oi8rj]

I love that truck so much ur bun so will with it

[@DrDiff952]

You know Bruce you either build a pulling truck or you build a street truck. One or the other.

[@RFoster130]

Looks awesome. I was hoping you would actually center those fenders while you had em off.

[@ricardogonzalez2861]

Im I the only one impressed by the drill bit performance? Please let us know what brand of drill bit that is 😂😂

[@Bruce_Wilson]

Harbor freight lol

[@christramontana3598]

Right that's what I was thinking I want some of those drilling a truck frame like that unless he said that was the piece that was aluminum but either way cut like butter

[@matthewarrington2217]

@@Bruce_Wilson you just gotta love the fact you can get cheap tools with better quality than name brand Atleast sometimes lol

[@delwhylie4748]

Carbon fiber Rain catcher hanging off the side of that cab it also works as a dunce cap when you relize not a wise decision ....

[@countryboyscooter3402]

Ryan sounds like Herbert the Pervert from The Family Guy! lol!!🤣🤣

[@zinrichards9141]

So cool

[@DabTin]

This my friend is a good content! Greetings from Croatia!

[@edwardgrafton4663]

Hey Bruce Wilson are you going too change the cab on Blue Collar soon?

[@DrDiff952]

If you have the gulitene you should remove those air filters

[@johnwudarcki9315]

Now you just have to enter the “REAL” truck pull in Michigan with the loaded lumber trailer drag racing !!

[@Trenton-om9qs]

I've been waiting for this video. I can't wait to see how it does at the pull

[@ernestbrothers1298]

Good luck

[@ham-wu4rg]

GOOD LUCK BRUCE LIKE THE VIDEO

[@davidwilliams6645]

Wish you Good luck

[@MrTruker1]

I don’t know about pulling but the cross bar will adjust the weight on the drivers. The further forward will bit more weight on the front driver and back will put more on the rear drive axle. So check with another driver to see what will be better on your pulling truck. The more forward the cross support will pull the fifth wheel. The a teeter totter. Math I do know.

[@paulojr1808]

Novela de macho de respeito !!

[@jamesbillings6158]

I belive if you made the hole in the hood bigger you could of slid that in from the bottom and wouldn't see the flange only just the head of the rivets

[@johngrundy7197]

Nice job fellas. What brand axles do you run??

[@jesussavescars807]

I hope marry was all god that was a scary crash flip last night definitely never seen that before

[@taffysgarage]

Bruce what drill bits you using

[@dennissastini3312]

Bruce what happened to the old guy that did a bunch of polishing on the old cabover you sold to Tim he seemed to be a pretty good old boy just wondering bout the same time as the little luv truck you've come a long way from the spiral staircase in the old shop

[@realkilju]

new wheels would be sick

[@jerrylewis3391]

It would look more sinister with the black bumper.

[@christramontana3598]

I wish he wouldn't be a video behind I was hoping he would do the pull video live tonight Been wanting to see this thing go down the track either way excited to see you pull with it truck looks great Bruce I hope all you and your crews hard work pays off 👍🏻

[@blakesmith2594]

I have some family in ocala

[@dennissastini3312]

It happens a lot of great minds knew what was up in the comments your boy should of known better just saying great job Bruce sounds amazing now

[@BassMaann]

agree. for him being a diesel mechanic he should have been able to tell within 5-10 seconds of it running

[@jimspurck8659]

Take front axle put 22.5 tires on it and put 24.5 tires on rear and put low pro 22.5 on steer axle

[@ethanpilko5566]

Do you have and ahd hats left

[@thefordman8817]

You need to get rid of the hood stack and put some real stacks on it

[@christramontana3598]

That's what I think also and air cleaners and mirrors I hate those stupid air cleaners on that thing and never did like hood stacks on trucks

[@warrenmichael918]

its a dedicated pulling truck, they want the hot exhaust to get out as soon as possible

[@tommyross2959]

You are going to Vedo the pulls ( right) I live in Ocala but I'm being treated for cancer right now and can't go . But dieing to go but can't walk right now.

[@tommyross2959]

And last had to work

[@user-zo1os7cv7w]

🌷

[@charlesroer972]

Bruce lights ,and paint are last things to do . I’m not hearing the smother impulses from exhaust. Sounds as if one injector is stock volume and 5 injectors are increased flow . I’ve been working on all kinds of diesels since 1960 . Can tell a lot listening to idle and powering up . Hope I’m wrong! Not wrong hardly ever . Since no such thing as luck , u make the advantage or disadvantage by procedures. No hate here just noticing things🤙🏽

[@isaacsims6203]

You cant hate on bruce

[@Drew_379]

I always dump some transmission fluid in the tank to lube up the injectors. Does anybody else do that?

[@lornperkins4270]

Does Bruce own that telehandler or is he renting it because it still has the rental company's name on it

[@Bruce_Wilson]

Own, came from an auction

[@johnmaloney265]

hope you feeding those guys for working late,

[@364rooster]

The mark of Kain

[@MARKLOCKWOOD2012]

sounds like a locomotive 🚂 need train horns be all set

[@joshua_jones1985]

🤘🏼🇺🇸

[@novaxgaming2958]

The short joke tho😂

[@aaa700]

Where is your trusty whiteboard and sharpie with the list of things that need to be done and then checked off as they’re done?

[@811chicago5]

You should keep the same volume as the music rather than having us turn up the volume to turn it back down on our speakers when you start talking again.

[@geraldoreynoso2480]

U know what the crome bumper u put on the pulling truck looks rather nice 👌

[@wc6553]

Tim Gentry math would put your horsepower at 1 million horsepower.

[@mikenano8046]

😂😂😂😂

[@tristanoliva]

For real though

[@SouthernFarmingTV]

Dammit boy

[@zinrichards9141]

Is it a Peterbilt?

[@joshua_jones1985]

Yes

[@realkilju]

yes it is

[@haroldsgarage4320]

Hire me Bruce to maintain your semi trucks….

[@cedricbroussard8738]

Awesome 👌

[@DOCTRJ]

KZbin Fans Diagnosis! Win

[@mikemarti2073]

The support beam behind the fifth wheel is WAAAAY to close to the fifth wheel !!! You are going to totally put too much upward pressure on the fifth wheel. The support beam needs to be all the way to the back.

[@jalopyjoe4483]

Was hear

[@toddfolyer6948]

Don't blow it up.

[@natetheaxebattles2898]

Who cares horsepower. What she at for torque? That's what does the pullin!

[@isaacsims6203]

They hate on him cause they are so jellouse of him cause they dont have the corrizzzzzmaa

[@TheJohndeere466]

It still doesnt sound good to me.