Pumping Finish Coats with the ToughTek S340e

[@JohnConley-l5c]

What size air compressor would you need to run this for an acrylic sand finish

[@polarunion]

Would really appreciate a follow up from Greco on these questions and an effort to support these users.

[@GracoMortar]

Hi Patrick. I apologize for the delay in responding to these. Answers below. If you have any questions or would like more information, Danny is happy to help. His phone number is 505-382-0905. Thank you!

[@MrJFoster1984]

I haven't pumped before but I've heard it is good fun!

[@igorrosanelly2351]

Hey guys, does someone has to float with the trowel after finish is sprayed on the wall or it looks consistent after being sprayed two times like you said? Ive tried spraying the finish before with the hopper ( without using a float) it looked horrible, inconsistent color , spots everywhere, thanks

[@GracoMortar]

Two light coats will take care of inconsistencies. I apologize for not seeing this question. If you have any more questions, please call Danny at 505-382-0905.

[@wayneswasey2318]

Can you spray veneer plaster with this machine?

[@GracoMortar]

You can, but you don't want the old batch to set off the new batch, so you want to use up all of the vaneer that's in the hopper before adding more. If you have any more questions, please call Danny at 505-382-0905.

[@Lawiah0]

Kirk Giordano plastering Inc. sent me.

[@kucaistil]

Loša prezentacija. Čovek nema iskustva ni minimum