Punch on curve sheet metal wall | Punch & Die form, Sketch, Quilt & Flatten form in Creo Parametric

[@bhaktiraag8032]

You doing a grate job for the needy....

[@ych4763]

Wow thank you sir, very detail step by step!

[@CADCLASS]

Great I want to join your class Please let me know if any training classes provided... Thanks for your knowledge sharing

[@loboslobos14]

This video is very helpful. Thank you,

[@AjithKumar-lz2sj]

Ur video gives more confident sir

[@CADxTraining]

Learn more at it's best.

[@pooyahabibitabar694]

Hi. First thanks for all the great videos. I also have an issue in doing the quilt form because there is no option for putting the end cap ( it doesn't let to choose between solid and surface). it's Creo V8 . No matter the feature is (Extrude,Revolve,..) there is no option to choose.

[@CADxTraining]

Yes I know that Creo 8 is not similar to earlier version but all the functions are still available in Creo 8. In Creo Parametric 8, you can do everything by shifting the tab from sheet metal to solid. Hope you got the option.

[@pooyahabibitabar694]

@@CADxTraining Thanks for replying in such a short time. Yes, I got it. it is all there just need to change the tab. Again thanks

[@ummarkhan8049]

Thank you very much Brother

[@_mr.t.a.m_8803]

Sir, thanks for knowledge sharing. Please make a video about detail explanation of GD&T with an example of manufacturing drawing

[@CADxTraining]

Watch this for basic information. kzbin.info/www/bejne/Y2TXf2qBq6mIoLM

[@BeWithWasif101]

what is the short cut key for switch off and switch on datum planes

[@CADxTraining]

There is no shortcut. you need to create a map key.

[@BeWithWasif101]

@@CADxTraining how can i creat map key

[@CADxTraining]

You can watch this. kzbin.info/www/bejne/qYWvYmCEhdN0j9U

[@kharikrishna7526]

i am not able create circle in sketch form in 17.05 after pressing ok it not generating any shape

[@CADxTraining]

Try to change the size of the circle. Play with flip directions.

[@kharikrishna7526]

thanks for the suggestion sir but still it is not generating

[@durairajabaskaran8419]

@@kharikrishna7526 create the datum plane on that surface by using point as through and surface as tangent,its working

[@vignesh_kumar.]

In last, how do you select the two surfaces in offset surface option. I am not able to select the two surfaces

[@CADxTraining]

Write down the timing

[@vignesh_kumar.]

22:38 @@CADxTraining

[@CADxTraining]

Inside the offset first you select the surface offset option. Move your cursor near to the cylindrical surface. Now if you directly select that surface, it will only select half of that cylinder. So don't select like that. Just move your cursor near to that surface And right click two times. You will notice that it is highlighting the entire cylindrical surface. Once it highlights the entire cylindrical surface then click it. Now the selection is done. Put the offset value.

[@vignesh_kumar.]

Thanks bro @@CADxTraining

[@vignesh_kumar.]

how to create datum axis in model tree (A_1, A_2, and A_3) before coordinate system, In model tree your have right, top, front plane, A_1, A_2, A_3 axis, and Coordinate System how bro

[@CADxTraining]

These are the very basic things. You need to join our paid training to learn Creo from very basic to the advance level.

[@piyushkumarrajavat4848]

Can i get pdfs

[@agsamuel10]

What is the 'Refit' mouse shortcut?

[@CADxTraining]

For this you must learn about map keys in creo parametric. Follow this link to understand it better. kzbin.info/www/bejne/qYWvYmCEhdN0j9U

[@agsamuel10]

@@CADxTraining Ok Thank you for your prompt reply, will follow.

[@Gordiya_0612]

Sir rs299 aur rs799 vali jo membership usmai deference kya hai? Both are same?

[@CADxTraining]

Both are not the same. Both have different videos. If you go for 799 then you will get access for 299 automatically.

[@Gordiya_0612]

@@CADxTraining ok sir

[@Gordiya_0612]

@@CADxTraining sir how to create new orientation view

[@Gordiya_0612]

@@CADxTraining sir jo rs799 vala purchase karuga to usmai sirf 7 videos hoge ki jyada?

[@Gordiya_0612]

Sir If I purchase a membership of 799, will I get 7 videos or will there be other videos more than that because there are only 7 videos with membership in your channel?

[@Gordiya_0612]

Sir, How to change the face11:14 And how to create orientation view pls make video

[@CADxTraining]

Just turn the part around to change the face

[@gangaGSH]

Sir please upload k factor & BA videos

[@omkarsutar578]

What is difference between punch form and die form? Thank you sir.

[@CADxTraining]

Convex and concave impression

[@kandularajesh3237]

Thanks bro

[@kbnchannel1991]

Great tq

[@dilllibabuk5414]

U r publicing Videos r very usefull to me Thank u very much Sir. Can u send me ur email Id to me for I have a 2 d drawing... So many times I tried to Convert 3d. I can't So help me sir.... thank u sir

[@CADxTraining]

Mail me at [e-mail]