Putting a 1965 chevrolet van back on the road! Episode 2

[@morgoon52]

So good ... Happy to tune in for more good stuff and wish you the best!

[@OverRevved]

Thanks so much! I’ve got a couple awesome projects coming soon!

[@morgoon52]

@@OverRevved very cool I have a 78 Scout SSII I should be working on ..good luck w everything

[@charleneguthrie6724]

Keep use posted that's one of my favorite

[@OverRevved]

@@charleneguthrie6724 if you check out the channel I’ve got more videos of the van! Recently did more work and some interior 👍🏻

[@lesliehall3023]

Love these flat screen early chevy vans, definitely drop the front a bit and leave the back how it sits with 6,s on the front and 8 or 10,s on the back, definitely mag wheels thats perfect for me 👌

[@OverRevved]

For sure one of my funnest rigs to drive right now!

[@JosephGeary-j7g]

Had one 44 years ago in high school

[@CountryBoyGasGarage]

I love a groovy boogie van! ✌🏻

[@mattewiegand9896]

Cool to see this one back on the road

[@stevepeyton9073]

I had a 66 back in the 70s I think I would upgrade to 67 and later brakes Those old 6 bangers are sweet engines

[@OverRevved]

@@stevepeyton9073 yes they are! Hard to kill too

[@dontheplumber9338]

Boogie sounds cool, nice work gettin it back on

[@OverRevved]

Thanks! Hopefully be workin on her again soon!

[@madlukasik]

You said in the other video you had an electric fan. Might be your problem overheating. Not pushing enough air thru it. Glad your going back to a fan.

[@duaneulman9915]

Thank you 😊

[@kevinmcfarlane9113]

Great vids thanks for sharing. Very helpful. Im in SW washington with a 65 G10 project to. Thanks for the motivation.

[@OverRevved]

That’s awesome! Maybe one day we will run into each other once you get it on the road!

[@shawnhammack7297]

Those extra brake parts will get used at some point during your long , successful KZbin career. 👍🏼

[@OverRevved]

😂 always nice to have extra parts!

[@mr.gutwrench]

Wow, your like a shot of Narcan to a dead van. Every time you bring one back from the dead a Tesla catches fire somewhere.

[@OverRevved]

😂😂 love it

[@beebong1]

Make it a boogie van. Gull wing the back door. Give it full instrumentation. First thing when you start work on the interior put down sound dead material throughout the entire van. Put a sunroof above the driver’s head and a possible HVAC Unit from an RV in the center. Insulate the walls of course. Keep this project going. Looking forward to seeing the results.

[@johnnyjohnson5361]

I'd make a mystery machine out of it . 🤘

[@mikego18753]

I enjoyed #1,will I enjoy#2? Thanks

[@OverRevved]

@@mikego18753 I think you will! I also have a new episode with our van coming out today! Make sure you check that one out 🤘🏻

[@mikego18753]

Thanks

[@JohnMontgomery-p6z]

I will It

[@CliffEckstorm-lh9jq]

No question what I would do with it… Mystery Machine…

[@CliffEckstorm-lh9jq]

Even though I like the wheels that are on it; heck, I might just leave them on it for awhile until I found the right steel wheels and hubcaps to complete the Mystery Machine look…😏😎

[@OverRevved]

😂👌🏻

[@paulneron375]

I wood make it a Gasser.

[@OverRevved]

@@paulneron375 that would be cool! I might have picked up another project that would be a good candidate for that 👌🏻

[@ronweaver9296]

Basic 60's trans

[@eddiealbritton2462]

You didn't change the pilot barring in the flywheel?🤔 Could be a mistake???🤕

[@OverRevved]

Yes the pilot bearing did get changed, might have gotten left out of the video tho. Oops lol

[@rev106]

Are you selling parts from your parts van? I'm looking for inner front door handles and outer side door handles and factory seats, let me know!

[@OverRevved]

I’m currently not since I’m still picking through for mine! But if I do I will try to post a link for my eBay, that way you could have them shipped easily!

[@rev106]

ok thanks! @@OverRevved

[@jefferywarburton2116]

60-66 c10 handles might do for the inner ones.

[@rupe53]

@@jefferywarburton2116 any of the C series will be basically the same. C-50 and 60 are the same through the late 70s and G series vans are almost identical into the 90s, although you need to see if they are held on by a clip or a set screw. Most of the 60s vintage need the set screw unless some of the parts have been changed. Early 60s Corvair outside handles are also similar. The dashboard, glove box, and steering wheel are identical to all the Corvair trucks.

[@jefferywarburton2116]

It seems the 60-66 are the closest to what is on my 67. @@rupe53

[@tabormiston179]

Throw a dirt bike in the back and enjoy!

[@OverRevved]

That’s for sure! It would also be cool to go pick up an old chopper with it

[@jjtt7408]

IF IT HAS LEAF SPRINGS IN THE FRONT, DUMP THE STRAIGHT AXEL YOU CAN MAKE IT A 4X4 BY USING SOME USED JEEP PARTS OR OTHER 4X4 PARTS / I REMEMBER ONE LIKE THAT MANY MANY YEARS AGO / REMEMBER YOU ASKED / KEEP THE FAITH , JESUS SAVES

[@OverRevved]

I love it! Maybe even Toyota 👌🏻 sounds awesome

[@jfink1]

Make it into the Mystery Mobile from Scoobie Doo.

[@mr.gutwrench]

Please don't hate me. If you are buying a new master cylinder, why wouldn't you get a double cyl.?

[@OverRevved]

Ya didn’t think much on it guess! Just ordered a pile of replacement parts figuring I would need them and didn’t really upgrade, just got direct replacement