PXG 0211 Irons v TaylorMade P790 Irons

[@jmoakley1]

It is apparent from reviews and feedback I have read that many folks are butt-hurt over the PXG prices and cannot adequately or fairly comment. That said, your reviews are always spot-on and enjoyable. I have played most brands of clubs and have loved some and not so loved others. As a military vet I am drawn to the Parson's commitment to our military but haven't hit the PXG's yet. I love the look of the PXG's and the new 0211's but I grew up playing cast with Ping's i2's and liked them as well as Mizuno's, Taylormade's and Titleist forged and I liked them too. Totally comes down to feel and preference no matter the brand. Thank you.

[@jerry2445]

Been fitted for 0211 DC 6-PW & #4 Hybrid &7 Wood. All superb. Amazing value considering the quality and brand!

[@robertpeters6923]

Bought a set of 0211’s about a month ago. I hit these so much better than my Ping irons. I did change shafts from senior to regular. Your videos got me looking at the PXG’s. Thanks for your videos.

[@buttdreads]

pings are hard to hit

[@TC-bz8sm]

What ping model ?

[@robertpeters6923]

@@TC-bz8sm G410

[@TC-bz8sm]

@@robertpeters6923thanks bro but kinda surprised to learn tahg Ping G series is hard to hit, could you elaborate a bit ?

[@GOLFADDICT65]

PXG has some great prices right now till June 1st....ordered my Gen 2 SGI irons at only 129US a club instead of the 400 US a club that it was......driver Gen 2 XF also and 2 hybrids....i am so excited like a kid on xmas morning....cheers all and enjoy your game

[@TheMcfreeze]

I just got a set of 0211"s. I haven't played my first round with them yet. If you get the right shaft there isn't much difference in clubs when you are hitting different manufacturers clubs within 3 yards of each other.

[@johnburnsworth425]

Just bought a used set of PXG 0211 and what sold me when demoing them was the feel. I couldn't believe they were a cast club and my distance and dispersion were more consistent with them than my Apex 16's. I just was looking for reviews when I saw yours and agree with everything you said. Thanks and keep up the good work.

[@beedee9534]

Best clubs i hit in 50 years love PXG

[@theForestWhitaker]

Gonna be honest I only got the 0211's because of the Hero Program. Getting a set from 5-Gap under $700 shipped is too good to pass up.

[@chasingthesun745]

I'm looking at getting a set as well thanks to the Hero Program. How do you like the 0211?

[@jmoakley1]

Well, i ordered the 0211’s and the Gen1 driver and 3-wood. Played twice and it’s already helped my game with both accuracy and distance. And the feel is crazy good. May not be for everyone but i love mine.

[@TheAverageGolfer]

jmoakley1 you’ve got yourself some great clubs and hope you continue to enjoy 👍

[@jmoakley1]

@@TheAverageGolfer Thanks buddy. I believe in reviews before making a big purchase and your's helped greatly. Keep up the good work!

[@garrywilcox2921]

I don't like the look of most pxg but the 0211 is beautiful, I'm torn between these to I do love the p790 I'm getting fitted but price may be the difference.

[@SilbarPR]

Now that pxg has dropped its price on the 0211 to $95 US per club, does make it more of a bargain? Great review!

[@Chyeahokay]

$89 now!

[@TheRycooder]

@@Chyeahokay now $77 in US

[@gregorywalker4997]

mostly buying used clubs so price can vary all over the map. the pxg's top line on the original 0211 is the winner for me, but i would prefer a little smaller head BUT if feel is good that's what i find missing in older clunky, large head designs so i'm looking forward to getting mine today . thanks for the marvelous videos!

[@garrywilcox2921]

This was the best review I've watched I'm getting a set of p790 for my birthday in February, I was torn between the ping i500 and the p 790 after a number of times testing each I'm going with the tm.i do love the pxg 0211 my favorite of the pxg it's just the price point that takes them out.keep all the great video coming love the content

[@shannondetro441]

they are less expensive than the i500 as well as the p790

[@MSDOGS1976]

Amazing how much the 0211 has come down in price in a year. Now $89 per club. As cheap as anything out there now.

[@cannongardner2658]

saw that deal and got fitted today and ordered them on the spot. solid deal. says price is while supplies last, so i think they are selling off their inventory

[@bnzstheboy6520]

@@cannongardner2658 Nope, the club was over price with less tech.. Sell high then go low and they will take off - because fools like you will think your winning .. There a fool born every day

[@otherone1234]

@@bnzstheboy6520 One fool born per day out of 100's of thousand births a day is nothing.....😂😂

[@jimblazina935]

Hi I'm looking at the specs for each set. PXG website says 9 iron has .07 inches offset, which is 1.78 miilimeters, and the Taylor made site says the P790 9 iron has 2.1 mm. so the pxg has a bit less offset than the p790 in the 9 iron. In the 8 iron they both have the same offset. in the 7 iron and lower, the P790 clubs have less offset.

[@mauritzwinquist2551]

Went through a fitting today. Thanks for the review. What irons would you recommend having the bag ... The 0211 offers 3-SW ... your thoughts.

[@glennhoyt811]

I just order a set 4-PW today...$84 per club when ordering over the phone, $89 online.

[@cwugrad396]

Interesting. I get that there is inconsistency bc we are all average golfers but the gapping is an issue for both. When you take your best shot with the PXG 7 and 5 iron there is a 15.5 yard gap which is too close but then you take the best shot with the TM 7 and 5 iron and there is about a 17 yard gap which is also too close. Whichever set I picked I’d want to see what that 6 iron was doing and see if it would be smart to change lofts to get a bit more out the 5 iron to get a bit of separation

[@TheAverageGolfer]

It is a very good point and something I am looking at for a future video

[@cwugrad396]

The Average Golfer I had the previous set of the P790’s and I had 6-7 yard gap between some clubs, 11 between some, and 15 yards between others. It was all over the shop. When I originally got fit it was just a 7 iron so I didn’t know it would be a problem. When the clubs arrived and I got them on the course realized then something wasn’t right so went to a local rep and after hitting all the irons (only using the good strikes) and looking at the numbers he was able to do some adjusting with the lofts to get the right gapping of about 10-12 yards. Problem solved

[@westport1405]

Very interested to have you comments on the Pxg gen3 vs the Mizuno 921 forged. I Loved your trip to Pxg Arizona and how much you tavedcabout the irons that you ended up with Regards Dave

[@geordietoonforlife.1155]

Hi Andy, as a former owner of the pxg irons I can only agree that the feel is absolutely fantastic and it does matter too me. I’ve sold my pxgs because I won the Mizuno HMBs and I also have a set of Titleist Ap2s/Ap3s combo set which I was using more than the pxgs. Personally on your test I prefer the looks of PXG at address they do have a nicer top line as for feel I don’t know what the taylormade are like as I’ve not hit them but one of my pals had just ordered a set so in a couple of weeks time I’ll get too hit his too see what they are like. When you test the Mizuno against your current set you’ll find the loft on the 7 iron is 32 degrees which isn’t as strong as some irons but you can have them stronger by 2 degrees if you wish personally I’ve kept mine as standard loft and lie. I believe from what I’ve read and heard the hollow head has too be a bit thicker on the top line so they don’t collapse, and the Mizuno is hollow no speed foam or anything like that inside, I’ve only played one round with my new irons and I’m absolutely blown away at the feel of these irons I thought the Titleist were lovely in feel but my god what a difference with the Mizunos. Your review is spot on and so honest as it’s down too personal choice at the end of the day no right and no wrong in whatever you choose. I must say they are impressive numbers with both clubs 150 carry with a 9 iron is very healthy indeed, going off my one round with mine I would say that’s a good 10 yards bigger carry than my 9 iron, I suppose the loft and possibly the longer shaft has a bit too do with it but nevertheless a very good honest review and I look forward too your findings with the HMBs. Well done excellent review and totally honest as normal. 👏👏👏

[@TheAverageGolfer]

Appreciate the feedback and as usual I think you have a good assessment of all the products you mentioned, glad the Mizunos are going well!

[@BaBaBooeyWRLD]

Winner Winner! From James's channel, right on.

[@geordietoonforlife.1155]

jay poma Yes your right Jay, hope your keeping well.

[@doughartung1056]

I had the 0211 cor2, thinking about getting another set with graphite, senior flex. Or possibly the Mizuno, 225 same type of shaft. Which would you choose?

[@garysmith70]

Mizuno MP 20 hmb Vs the P790 has got to happen...great vid as always

[@TheAverageGolfer]

Already done that one bud

[@kurtdeklerk]

How does the PXG 0211 compare to the Mizuno 921 Hot metal iron.cheers

[@azcharlie2009]

I've hit the P790 (with Mamiya graphite shafts) and was sold the minute I did. Unfortunately, I then found out how expensive they were! $1500 a set with graphite shafts!! PXG is selling the 211s for $99/club US right now, with a graphite shaft! I've had Titleist AP2 which I've never liked. No distance, no feel, small looking heads. If the PXGs have a slightly larger head, I think I might like that. I've used Taylormade Burners for years. Are their lengths comparable to Taylormades? Taylormade seems to make their shafts just a bit long than other brands. Actually, I like that.

[@rmruderan5024]

great video Andy! I was just fit and have on order the P790, for me it is a great feeling iron and my left to right misses were really tight. Also for me price does matters and TM checked all of my boxes. Thanks again for the great videos.

[@TheAverageGolfer]

You have some great clubs!

[@tiborsol7959]

The offset on the p790 is identical for 2019 as in 2017 in 7 iron and up. Very slightly less in the 2019 edition for 6,5 and 4 irons. By less I mean like 0.1 mm.

[@thomasmeyers7283]

The Ping I500’s could of been in this review too since they are very similar to the P790’s, though the Ping I500s haven’t been revamped like the P790s. I like that the I500s come in three different loft ranges.

[@TheAverageGolfer]

Maybe but that product is 2018

[@BaBaBooeyWRLD]

i500 are hollow but thats where the "tech" ends so to speak. For me the 0211 and P790 were about 10-15 yards longer.

[@jacobmccain8082]

I found the i500s to feel horrible. Hard and clicky. Felt nothing like a good endo or Mizuno forging.

[@BaBaBooeyWRLD]

@@jacobmccain8082 Never hit an Endo forged iron before but I would like to. I know the feeling of a flush Mizuno and its awesome.

[@jacobmccain8082]

@@BaBaBooeyWRLD Endo has their own brand but they also forge products for a bunch of companies. Srixon and Bridgestone come to mind as well as some of the old Titleist stuff.

[@martynedwards1493]

Great review Andy....Looking forward to more PXG content, there’s not a great deal out there in the UK especially

[@TheAverageGolfer]

More coming very soon!

[@AlanLJones]

Hi from the USA. Can you do a comparison of the following clubs? Bridgestone Tour B JGR HF2 vs Mizuno MP20 HMB vs Cleveland Launcher UHX irons vs. Titleiest T200? Thank you

[@TheAverageGolfer]

I cannot get the Bridgestone clubs

[@AlanLJones]

@@TheAverageGolfer Darn

[@joelane2845]

Hi Andy! Great vid as always!! Curious. Do you think PXG’s drivers, woods and hybrids are competitive with the top clubs out there or should I wait for the Gen 3 on those clubs. I do play the 0211 irons too and love them!!

[@TheAverageGolfer]

I think the GEN02 woods are exceptional and with shaft options available can be very similar in price to other brands who charge for upgrades. As for GEN03 I have no idea as to when this might happen

[@martynedwards1493]

I have the XF with a fitted premium shaft. Rated by many as up there as most forgiving & I agree! No slouch on distance either....I would think Gen 3 would be some way off!

[@richardprosser9305]

Hi Andy. Interesting that you say how soft the pxg feels. I have the 'old 'P790's and just developed a left writs issue (wear and tare apparently says the doc! ) and feel the vibrations more hence a painful wrist after hitting any balls. Basically, in your experience, what is the softest combination of iron head and golf shaft setup the provide the least discomfort? Pxg plus graphite shaft! Big soft grips? Any sugestions?

[@TheAverageGolfer]

I have read many comments from viewers who have solved similar problems by using graphite shafts Richard, feedback is that it impacts massively on reducing vibration, give them a try I suppose?

[@richardprosser9305]

@@TheAverageGolferThanks for your reply. My thought is to accumulated every advantage in one club. The softest feeling iron, graphite or steelfibre shaft and Winn Dry tac (oversize) grips.! The question is what in your opinion is the softest irons on the market?

[@BaBaBooeyWRLD]

FINALLY someone compares these two. It came down to these two for me in a recent fitting. Very very similar. Take price out of it which is hard to do. Sound and feel is what it came down to for me which was.......PXG. I hate offset but in the long irons it really helped tighten up dispersion enough so that it doesnt bother me at all. It actually gives me more confidence off the tee with 4 and 5 irons. Both are great. Its a bit subjective. I've played Mizuno MP-63's since they came out and couldnt get the distance from the HMB as hard as I tried, lol.

[@TheAverageGolfer]

Great analysis Jay and I think you have it spot on

[@BaBaBooeyWRLD]

@@TheAverageGolfer Thank you! I even went with the 0211 GW which is another first for me. Both sets have great looking GW's and are much easier to hit full shots from 95-110 yards instead of a 50* blade style wedge. I added the 55* & 60* Vokey SM7 that blends surprisingly well with the 0211 and even the P790 looks wise which is important to me. I've always played Vokey's. I dunno, call it a happy accident but so far its been a noticeable change for the better, lol.

[@TheAverageGolfer]

@@BaBaBooeyWRLD Yes I agree, I did a video asking why we opt to use the more 'blade' style wedges rather than those in a continuation of a 'full set' it baffles me really

[@BaBaBooeyWRLD]

@@TheAverageGolfer Absolutely. Its one of those "don't knock it 'til ya try it" situations. Good to see these sets that have a 45* PW are starting to make a more appealing looking 50* GW. Personally, yardage gapping has been much more consistent on Trackman and on the course. Quite a rare thing to see so much improvement from an equipment change without adjusting my swing. Putter aside, the newest club in my bag was 8 yrs old until recently.

[@Ibizassini]

Your ball heights are better on the TM, starts to be a bit low for you w the 5i PXG

[@juanldeguevara582]

Hi ! What about disperssion ?

[@robertbencangey6207]

Can’t say I’m a huge fine of either of these clubs or the HMB’s, that I describe as hideous looking. However, I’m a fine of you and your reviews. I liked to see a players irons comparison between the MMC and the Apex Pro 19. Thanks and keep them coming!

[@TheAverageGolfer]

Will take a look

[@JohnnyDSR]

The new 2021 Model 0211 PXG has better performance at their standard retail is aroun $115 / club... Andy just did a new review on them today so be sure to check out his latest video if you haven't done so yet!

[@markboreham5258]

Can you test the Honma TW-747vx and TW-x

[@AlexTheLi0n]

Excellent video as usual. Because the Mizuno and TaylorMade are forged vs cast I would go with them any day of the week. Also you have more flexibility with loft and lie with forged clubs. The sounds means nothing to me but feel is important along with performance. I haven’t even hit them and will bet you that the Mizuno is probably the superior feel and performance option followed by TaylorMade. I’ve owned Mizuno in the past and I haven’t tried anything that was even close. I haven’t tried the PXG but I’m not really interested in them either. I’m going tomorrow to try the HMB’s and the TM P790, thanks to you that is. I wish you the best with the PXG’s and keep up the great work with the videos

[@BaBaBooeyWRLD]

Alexander Roberson for giggles hit the PXG. I was surprised to say the least.

[@golfbuddy1969]

I have always liked shorter blade lengths. There is a reason that the clubs with longer blade lengths have more offset. The longer the blade, the longer it takes to square the face. The offset buys you a “millisecond” more time to get that long toe squared up. It also explains a little higher ball speed, because the longer the blade length, as the club squares, it is picking up mph. If that makes sense to you?

[@TheAverageGolfer]

it totally makes sense and you have it spot on !

[@jaybyrne4562]

Really consistent swings on both there pal. Guess it's just down to a personal choice when things are that close!

[@TheAverageGolfer]

Yes I think the variable were down to me and your right personal choices

[@BaBaBooeyWRLD]

Jay Byrne exactly

[@michaelwalsh7753]

Decent video. TM also had higher overall peak height so guess possibly stops a smidge quicker. Not surprised u wouldn't swap your PXG as everyone I know that has them really likes them but I couldn't/wouldn't pay up for a PXG product

[@TheAverageGolfer]

Response when people try is very positive

[@mikebest634]

Michael Walsh - I woudent buy PXG either ,can't justify the price for a cast cast club in the cheaper range when Mizuno produce the quality irons in forged that they do .Also I like proper lofts on the 919 tours ,they gap perfectly down to my Vockey wedges .The PXG adverts are enough to put me off .

[@neilgardner5759]

New P790s fell solid off the face, not soft in my view. You really feel like you have thumped the ball with the 790s hence the reason I brought them. They are 0.5-1 club longer than the Yonex Pb E-Zone forged irons they replaced. 170yds with a well struck 7 iron, 155 yds on a 8, etc.

[@TheAverageGolfer]

Yes I would agree re the sound/face

[@richardgatehouse1520]

Think Taylormade have changed the demo shaft length by half an inch so probably very similar to your pxg Andy. Great review again 👍

[@justinpalmer2959]

Softer metal. I used to refuse to use anything non forged and yet Callaway MacDaddy cast wedges feel soft to me. Unfortunately they wear faster due to the softer metal

[@craigtalbot9316]

Andy do u like pxg over the Mp20 HMB?

[@TheAverageGolfer]

Needs a video to look closer

[@craigtalbot9316]

@@TheAverageGolfer you're the man for the job 😊😊👍👍

[@craigtalbot9316]

Rewatching this has me thinking of a change to pxg 🙈🙈

[@BaBaBooeyWRLD]

Craig Talbot I did. Hit a bunch with both and I’m coming from MP-63’s

[@jonbox2605]

I have a set of 0211s and absolutely love them, feel and sound are amazing and play like a players club, wouldn’t change a thing. I had my heart set on the latest P790s and when PXG came down to my local AG I thought I’d try them, that was it then, couldn’t ignore that the 0211 was that good. For me to change from Taylormade was a big thing and that other brand had to be that good.... and that was PXG. The custom fit is brilliant and you feel like you are getting the best with everything with PXG. That being said the 790s are very good, I’d just recommend trying the 0211s cos they will impress.

[@TheAverageGolfer]

Great feedback Jonathan and glad you are enjoying your 211's

[@pxg]

Thanks for the great feedback! We love to hear that you had a great fitting experience and are enjoying you 0211's :) ^A

[@BaBaBooeyWRLD]

Jonathan Box basically the same thing happened to me, lol

[@jonbox2605]

jay poma haha I knew pretty much straight away after hitting them, I was like “oh no!” 😂

[@jonbox2605]

PXG special thanks to James Brady the master fitter in the UK 🇬🇧

[@TimSenstockFilms]

This video could have be 1/3 the length without losing anything.

[@peterlund6495]

Great video Andy I must try those PXG irons

[@TheAverageGolfer]

Be interested to hear your feedback

[@peterlund6495]

@@TheAverageGolfer will be in touch Andy

[@JDSFLA]

Could you please review the recently introduced Honma T//World XP-1 hollow body irons? I have not seen a review anywhere on them yet, and I find the photos very handsome. This category is certainly being addressed by many golf companies, and I would like to see how the Honma's perform. Meanwhile, thanks for this entertaining and relevant comparison video.

[@TheAverageGolfer]

Hopefully very soon

[@shanemilehi]

Can you review the new Cleveland UHX irons??

[@TheAverageGolfer]

If I could get them

[@shanemilehi]

Thank you for replying. Hopefully you can get your hands on them. I tested some at PGA superstore and I hit them straight -ish but really would like to see a review Thanks sir

[@mikesilverii7535]

919 Hot metal Pro vs Mp 20 HMB?? In terms of forgiveness especially

[@nickhaslam3253]

You got a new camera? Looks very clear

[@TheAverageGolfer]

Yes and glad you noticed......but maybe not such a good thing

[@nickhaslam3253]

The Average Golfer it’s very clear. I bet it will be excellent when your out and about

[@wayneowens1649]

Glad to see you’ve changed the title of previous video from new clubs to hickory 👍. I hope you didn’t find my comments offensive in previous feedback.

[@TheAverageGolfer]

you accused me of pumping out videos for money and now you ask was I offended?? Are you being serious?

[@joelane2845]

The TM P790 irons are a 1/4 inch longer than the previous generation.

[@TheAverageGolfer]

Yeah its an odd one, TM claim its the same bit they are taking measurement from diff place than previous?

[@briandavidson2684]

Did you get a dispersion comparison between each club?

[@TheAverageGolfer]

Yes and sorry for not displaying, very similar

[@andrewwolf4963]

how come every single UK golf youtuber has such an amazing studio or set up to film at , meanwhile i’ve never seen anything like this in america lol y’all do it so much better

[@saltaddict685]

Weather

[@garydavis8213]

I wonder if you actually have a better strike with 790 because the head is physically smaller. 🤷🏻‍♂️ I’ve hit the 790 in the local shops and don’t get the hype. They’re hard as a rock, imo. Haven’t had a chance to hit the PXG. Frankly, of the clubs I’ve casually hit in the stores, ™ 760 and Ping i210 have been the softest.

[@TheAverageGolfer]

760 and i210 have superb feel

[@pxg]

Hey Gary! If you are ever interested in taking our equipment for a test drive, we can get you set up with a no-obligation fitting in your area :) ^A

[@robbiles]

If I had to pick between the two of them Andy I'd pick the HMB.

[@anthonygovantes2456]

Try the Ping S55, you'd believe it's forged. Some dark wizardry involved

[@briantreadwell2206]

I’m not in the market for irons but I do enjoy your reviews 👍

[@TheAverageGolfer]

I am hearing rumours......

[@JonathanMundy0]

I’ve been waiting for this one Andy. Looking forward to a comparison with the HMB

[@TheAverageGolfer]

Yes will be coming soon

[@glencalvert9510]

Great video, you should always go test for yourself however videos like this are a great starting point. Very good information!

[@TheAverageGolfer]

Yes a very logical statement, totally agree

[@Sportstouring]

You do really good reviews. This is another one,

[@jaybyrne4562]

I'm going to do a head to head on monday when I'm back from work, based on a comment you made, I'm gonna put my ST190 driver up against a Donnay Slammer I bought off ebay for £5.99. See what that bad boy can do! 😂😂😂

[@TheAverageGolfer]

Look forward to that one!

[@jaybyrne4562]

@@TheAverageGolfer I'll take some screen shots of the data and send them you! First thing to note though, is the Slammer is 400cc head with stiff shaft and ST190 is 460cc with x flex, but best I could do. I don't think Donnay will send me one to test in my specs 😂😂😂

[@chuckgame4210]

How tall are you ?

[@jerlogcol]

I know you have the hmb video done and queued up! Let’s see it! 😊

[@TheAverageGolfer]

hahaha

[@golfbuddy1969]

...and months ago, when you announced that you were putting PXG in your bag, I said that I’d never use PXG, and you asked me why. But you said why sort of, when saying that both Mizuno and TM had a big price increase. I blame PXG for that. PXG created a new price ceiling, to the mass market, and left a wide opening for the other manufacturers to fill in behind. The MP20 and P790 wouldn’t be $1,400, but maybe $1,099, if it weren’t for PXG. Just my opinion of course.

[@TheAverageGolfer]

I look at it slightly differently, PXG set out to make a product that would be in the 'premium' category from day one and never suggested otherwise but if other manufacturers have changed their approach to cost due to being influenced by another brand then surely you would question that judgment, so increasing price based on what logic? because they can? thats what would bother me?

[@golfbuddy1969]

The Average Golfer - a great response...keep up the great work!

[@asdfkhieee]

I just got fitted into both of these irons. The numbers where so close my fitter told me either would be perfect for me. I've chosen the pxg since the shaft I was fitted into is stock with the pxg, and I get the 0211 for $95 a club right now with the heroes program. Can't beat the price, and the fact I don't have to buy the shafts aftermarket. I liked the size profile of the p790 better but liked the look of the pxg better with the smaller top line and more chrome finish. If the p790 would have been the same price, with the option to get my fitted shaft stock I would be pulling my hair out over which to choose. I still think pxg would win, but man what a tough decision it would be.

[@pxg]

Hope you are loving your new equipment :) ^A

[@asdfkhieee]

@@pxg they should arrive this weekend or early next week. I have 3 days off in a row next week to play nonstop with them.

[@rickford3099]

Could you share the difference between the 0211’s and the Epic pro irons you liked so much? Thx

[@gbmoney]

Do you know why the PXG has such a high bounce on their clubs? How does that affect real world playability? Thanks, keep up the great vids!

[@bnzstheboy6520]

the golfers that's buying the PXG don't even know what bounce is lol they looking at the price and think NOW it's low and buy lol...

[@WilbanksUSMC]

US veterans can now get PXG 0211’s for $75 US per iron. I just checked tonight.

[@thinkforurselfonce]

You can get 3 sets of 0211 for the price of P790

[@darrenbell6376]

Having tried these irons and many more this year price and feel was a major factor in selecting my new irons. Play off 6 handicap and i finally opted for the wilson staff c300 forged irons. Sorry far too expensive these overpriced hiped up irons Andy i chose a work horse and one that fits my game and at half the price the wilson forged are a clear standout for me. Until average golfers realise they are getting ripped off with ridiculous prices which are killing the game wilson staff will always be in my bag 👍

[@TheAverageGolfer]

As long as you are happy thats all that matters Darren, play well mate

[@mikebest634]

That off set would do my head in ,not something I could live with ,each to their own though ,neither club is a looker for me ,just dont like game improvement irons .

[@TheAverageGolfer]

Yes horses for courses

[@tiborsol7959]

I am the same with offset. Battled away with a set of Taylor made speed blades which were very offset and recently switched to a p790 which obviously retain some offset particularly in longer irons but substantially less than the old speed blades. Could not be more impressed by the p790 and I got a set of the 2017 edition after the 2019 came out. I tested both and apart from the shinier chrome and the Taylormade logo replacing the full word on the back, zero difference. Half the price though...

[@otherone1234]

Dude, I don't know where your numbers come from, but you are not hitting a 7 iron at 190 carry with your swing. So those numbers seem made up.

[@andrewayres1038]

It looks to me as if the Taylormade have the MORE OFFSET and Not the 0211! He seems to have contradicted himself in this video!

[@otherone1234]

you are wrong and he is right. while they both have similar offset, 0211's have about 15% more than 790's. How hard is to google "pxg 0211 iron specs" ? lol

[@deanbrayshaw5862]

PXG big seller. I have met one person playing PXG so far. Can't believe sales are that high. Kind of ignored price. And I live in London where the roads are paved with gold 😂😂

[@TheAverageGolfer]

Take a look at there company stats

[@BaBaBooeyWRLD]

I need to go to London with a sledgehammer!

[@pxg]

Hey Dean! We have a few fitting locations in your area if you are ever interested in testing out some of our equipment for yourself! Reach out if you are ever ready :) ^A

[@BaBaBooeyWRLD]

Dean Brayshaw there ya go! Give em a demo, they’re delicious.

[@BaBaBooeyWRLD]

PXG 👍✌️

[@patricktraynor7628]

PXG...$$$$$$$$$$$$$$$$$$$$$$$$$$$$

[@mr.yoohoo9356]

which club is which lmao

[@felicityprout9005]

Taylormade irons aren't great.