QB Repeater Installation Guide

This week, Cameron from Airgun Depot gives a step by step demonstration on installing Air Venturi’s QB Repeater Kit. The QB78 or QB79 Repeater Upgrade Kit transforms your favorite QB rifle from a single shot classic into a Benjiman style, magazine fed, multi shot beast.
QB78:
www.airgundepot...
QB79:
www.airgundepot...
Learn all about the Beeman QB series and order a QB78 & QB79. Visit: www.airgundepot...

[@NorthFloridaOutdoorsman]

Just found you channel, great information, quality, editing and over all awesome channel. Thank you for the help and looking forward to catching up on your channel.

[@airgundepot]

Thanks! Happy shooting 🎯

[@Monkeydad1969]

Nice one Cameron. At least there is another place to get the repeaters.

[@Monkeydad1969]

Going to have to get a repeater setup myself. Nice ratting setup with the breech.

[@JoseAntonio-pb7nd]

Fantastic install , thanks for sharing.

[@SPguns]

Very professional and useful video..!! Good job..!!

[@gregorybaker9277]

Can this Repeater kit still available? anywhere Great information to thank you

[@marvinlee8102]

Please make sure you guys let me know when their back in stock,i have two QB78s I will like to upgrade,don’t let MR.Archer bet you to it,nice setup.

[@jay2k08]

Hello form the UK. Do you have a link to where you got the kit from please?

[@frankyanorga212]

Great video buddy! we really like your video here in Mexico.

[@airgundepot]

Thanks! We're glad!

[@waysondudoit6985]

How do I get that kit?

[@reefgratos2035]

So for canadian 495 fps we need no washer? Can't find this kit in canada unfortunately

[@ivanborrero2966]

Excellent video. Nice job.

[@yazidelaste444]

Hey when will you guys restock

[@sarahsinclair5783]

Is there a repeater available for the xisico 60xs? Or does anyone have a link? Please help

[@craighawkes9555]

Can I get this shiped to the uk ?

[@mikejohn5467]

great attention to detail, thx

[@stephenhanson4513]

great video and might do the up grade

[@aboveview]

Can't find this for the .22 anymore only the .177 do you have a updated link?

[@codyclark8930]

Is the barrel that comes with it any better or worst than the original

[@MsTheCops]

Is this kit available in Canada? ...if so ...where? ...if you know.

[@anncrishiasarno4172]

Can i use it in my crosman model 160?

[@williamgeorge2946]

Would this kit be suitable for my SMK 501 Rabbit Destroyer?

[@howardtwigg8743]

Where can I buy this kit from I am in uk

[@gerzonsantander6215]

Thus the barrel included on the kit?

[@tcphll]

Very detailed video. Too bad the kit is out of stock at the moment or I'd probably be placing an order today.

[@malachibenabraham8852]

will this fit on the new beeman qb chief

[@airgundepot]

Not sure, we're out of stock on these at the moment so will have to find out when they get back in stock

[@ironhorse19]

Great video very informative many thanks for sharing

[@markho6088]

@@airgundepot dose it fit PCP?

[@edford3669]

Nice job sir!

[@philipdeighton8717]

I live in the UK. how can I set up this kit to not exeed 12 FPE.

[@handmadesharpening_channel]

hi, do u ship to philiphines..

[@beckerg04]

Will this work with the qb78s style?

[@chipmunkchatterfarmstead8712]

Does the kit work on the qb chief .22?

[@jimsinnovations2737]

Where can I get one

[@ceasarsilva4669]

Yes how can I get mine and how much does it cost also can u convert into pcp or just co2 bulk don't get me wrong I just wanna save $ on those 12 grams co2

[@airgundepot]

We have discontinued the QB Repeater kits.

[@ceasarsilva4669]

Airgun Depot where qb's having issues with that Upgrade or was da price of the rifle itself to low for such an upgrade ,reason I ask so I can keep trying or just leave it perfect as it is? Thank you brothers for taking time and replying,ps. most loyal fan.oh my wife hates all yaa but I said my airgun community is my family and will put a Pellet n that ass, then I gave her da key to my guns safe so I Ben Goin through withdraws of not shooting so ur replied made my day hahahehe😅😆😎!!!!!🔫

[@airgundepot]

I think with the Gauntlet coming in as such a low price with so many features fewer people are interested in building up a QB.

[@charlesrivers1866]

Da! That's tragic. I got a 2400KT a bit ago and was thinking of getting a 2260 until I saw a QB78... but now it seems like there's a high water mark for mods for the gun, and this was it. I guess I missed it.

[@lordthomastravis1617]

Proper internal polishing!! Probe, then hammer, trigger sear!and the recipient parts like hammer guide, and high use bits like bolt lever bolt/probe possible spring compression upgrade! Transfer ports drilled to 4.75 mm and polished to improve flow and effective charge dump!! Internal change's include, valve housing drilled to improve flow also! And harder boss valve spring! and pneumatic seal's vitro seal type. Moly grease is best on only v- seals sparingly! And in the internal pellet seating probe, receiver ,shaft, and probe seal ! upgraded . Elbow grease is cheap!! A bit of the old pelloil!. Or 3-1!! Lol. The felt wadding gone & four extra holes in the rear side of the internal value arrangement have together added a significant bite to its whispy bark! On the chrono she's now at 11.7flbs at the muzzle with a 11'09 grn pellet and fps =850-875fps at 15°c co2 and high accuracy from this underrated little lovely too!!! Fifty metres groups of about a bottle cap size !instantaneous confidence in the rifle! Shot on shot pellet after pellet!

[@MrCountrycuz]

my qb78 has air blowing out the barrel and I dont know what to do to fix it.

[@drekceldude]

how much does the kits cost,seems to me,you would be better off just buying a rifle that is multi shot capable from the get go. Its ok buying a cheap cheap rifle like the QB`s but when you have to upgrade them,it defeats the object of buying cheap in the first place.

[@ceasarsilva4669]

drekceldude actually da biggest mistake was buying my first pcp that was the 1077 I had it since it came out and still haven't Ben able to shoot it so I'm gonna make a pcp 1322 classic with that tube and cylinder from 1077 it's way better if u keep it co2

[@terrynb12]

What is the average increase in shot power after install? Thank you for the great video.

[@airgundepot]

Ill do a chrony test and post it up on our blog with all the velocity numbers. Ill make sure to link to it here as soon as I get it published.

[@terrynb12]

Sounds great. Thank you for the reply and great video.

[@chrisjonson3820]

Can you fit a scope with that

[@airgundepot]

Yes, it has an 11mm dovetail rail.

[@Biffo1262]

Modify thecstlck so you don't needvto reove the safety and also inset the stock fixing bolt for a smoother look and hold,

[@marielgonzalez6856]

Does this work with beeman qb chief

[@airgundepot]

It should, although Beeman has announced a new repeating version of the Chief that you may want to wait for.

[@jodiebeekman549]

will this work on the new chief

[@airgundepot]

Don't think so, it looks like there are some subtle enough differences between the two.

[@douglaswilson3978]

hi, do you ship to Canada..😎

[@airgundepot]

Some items we do, yes.

[@lithos7278]

Great video bro... One question because I can't find qb78 in 22 caliber in my country I buy in 177, I buy this kit in 22 caliber and install to my gun... I have repeater function and change to 22 as I want..... I think no problem with this because the kit have all breech, pellet prove, barrel, hammer..... What you say i am right....?

[@airgundepot]

Yes, that should work.

[@lithos7278]

@@airgundepot Thanks.....

[@jacobjohnson8131]

Thanks..i was looking at pcp's but im gonna buy a 79 n get the regulated ninja bottle n do this repeater kit..thanks

[@SodergrenWoodWorking]

are this kit still available?:)

[@airgundepot]

We are out of stock.

[@lefaymodronangus9429]

can it be shipped in the uuuuuu kkkkkkk???????

[@apoc2records911]

or use a mag

[@NorbertoDiSummo]

I called air gun depot they say that kit dont exist ? What the heck

[@airgundepot]

Hi, sorry to hear that you could not find the kit. Unfortunately, since this video is from 8 years ago, we no longer sell this kit. I encourage you to look around our website to find something else you will enjoy, though!

[@Biffo1262]

I understand the inventor/manufacturer ended up in prison so he could no longer produce them. Personally I much prefer the cheaper manual indexing magazines. Too much money to spend on a rifle of this level. The money is better spent on buying a better quality gun. I like these guns but spending so much on them makes no financial sense.

[@jimtoone1777]

Who you looking at buddy?

[@frankyanorga212]

All this information and no price . It’s bullsh!t