Quartz Liquid Glass Review & Demo

[@helenbeken848]

Been waiting to hear your thoughts on this clear. I've been using the liquid glass for a couple of years now and cannot fault it. I have my car flow coated in this stuff and best money ever spent. I've been using your advice and heating the liquid glass up and adding 5% reducer to get smoother finish.

[@TonysRefinishingTV]

gotta say mate glad to see you liked this clear too always been a fan of this stuff its all i use on all my own work too as you say for the price you cant beat it

[@TheKingskinz]

Tonys_Refinishing I first saw this product on your channel. Wanted a good quality clear for spraying bits on my Corrado. It’s s great product I use the fast and air dry and left overnight it dries great. Great review Gunny! Glad the liquid glass found its way to you

[@megaman4201]

Dry times are tricky and convoluted, one of those things that can be hard to actually pinpoint. According to PPG rep, it actually refers to panel temp which is far different than booth setting, for example you might hit the booth for 20 minutes at 140 degrees Fahrenheit but it could take 15 more more minutes for the panel temp to reach anywhere near 140... Especially for insulated parts like quarter panels and doors and to an extent even hoods and trunks. TC Annapolis MD

[@MrMazzucca320]

Almost identical to the clear we use to paint repair cars at my work (a car manufacturer based in the U.K 🇬🇧)

[@TheGunmanChannel]

This clear is amazing!!

[@mattslater2165]

Your out-of-the-gun finish is incredibly good. Always a pleasure watching your vids mate. I normally use Lechler clears but I've been tempted to buy some of this Quartz stuff for a while and now you've made my mind up. Gonna give it a bash. Thanks Gunny ;)

[@EMHcustom]

I shall be looking at this clear. I used a non iso clear coat, and all tho it was easy to spray it takes forever to go off I will definitely be switching

[@evan_arc_1622]

Been a while Gunny! Still knocking out beautiful work I see! 👍👌

[@Emils2006]

I have never seen better result as on that Jaguar wing. sometimes even with polish you can't get such a glass effect.

[@mitchellferre1652]

That green Jag looks awesome !!! 👍

[@gregoryjowers3629]

Wow gun you was killing it with the liquid glass. Man I really appreciate you giving this review on this clear I never knew about liquid glass till this video. Later mate

[@Thatguy-dk8zm]

Very interesting gunman you explain everything very well I'm learning lots from you love your work.

[@TheGunmanChannel]

Thanks again mate 💪

[@the_fomoco_man5160]

Always enjoy your vids and learning something new. Great job Gunman!

[@radudanielman]

GUNMAN, thank you for all your videos ! thank you.

[@armk1825]

Here where Im from in the U.S.A., we call that tack and wack method...wet on wet. Wet on wet spraying works best to my experience with slow drying hardeners.

[@jrmathes6567]

Beautiful finish, outstanding job.

[@konstantintop-painting6882]

the applikation of the clear is good the finish is good not for repair process only for komplete jobs how good they stick on WB basecoat and for how long?let somebody in darwin australia test this product and in two years let us know!

[@paulwoodward7954]

Great vid 👍 spoke to Chris today after trying some other quartz products to which I’m very impressed with and am thinking of switching to this clear

[@TheGunmanChannel]

It can't hurt to at least give it a try, I love it.

[@HDdanutHD]

Would love to get my car repainted,and by you. Don't really know why, but u give me a huge confidence. Great job as always !

[@beauchamp1763]

That clear is the shit mate. I remember Frankies Speed Shop channel in the uk allways using it and it's good to see it in good ol oz. Thumbs up gunny. 👍 Another first..

[@luayalamir9149]

Man ..... I love your work - good job

[@elqwan]

Which gun were you using and what settings seemed to work best with this clear. Also with the tack and wack method, if you were painting the cab of a pick up truck would you recommend doing a full coat on the entire cab and then wacking it again? Or would you do the roof, then follow up the second coat, then move to the next panel? Thanks gunny! Videos are priceless!

[@camerongillis437]

Have you tried SPI? People seem to love there clears and epoxy's in the usa

[@drumingmachine]

Living in Scotland i've used this and their ms crystal clear and have had decent results with both. ive found liquid glass needs 18 degrees and above to cure properly or it will never cure hard but that's clearly not a problem you will ever suffer lol;) Their ms clear is pretty much as good a finish but with a different application method typical of ms clears. The speedster is a thinner and a paint rocket combined if I mind right so will help dry it quicker as well as thinning. Never used the new extra fast so was really cool to see you use it in Oz where its so hot, figured they'd give you the slow or regular but the extra fast came out spot on dude!:) Been really looking forward to this vid for quite some time and so happy they managed to ship you some to try out:) Take it easy dude and keep smashing it!:)

[@drumingmachine]

Also the liquid glass smells good hahaa

[@RestoreIt]

As always, a very helpful video. Cheers!

[@SaltyTubers]

Holy crap man, you're a frickin' wizard!

[@TheGunmanChannel]

😂😂

[@arisspratamaaa]

Wow, nice clearcoat

[@evojigger]

Been saying for ages to get some of this, it is good stuff

[@robertpalin6516]

Awesome, how do we get this product in Australia? Tried sprayguns direct, but they don’t ship DG.

[@samuelescobar777]

Been waiting for someone to do a good full review. You covered everything. Thanks man. Good job. 😎✋

[@TheGunmanChannel]

See I'm glad you liked it, maybe I'm too obsessed but I didn't like it and nearly did it again.

[@samuelescobar777]

@@TheGunmanChannel video came out great bro.you can see good quality from your camera on the results of clear coat . Even with 3 coats its super glossy. Great product. After watching this i now am happy to try this out my self . :)

[@TheGunmanChannel]

When you do I'd recommend starting at 5-10% thinner and go down from there, find the sweet spot for your style.

[@samuelescobar777]

@@TheGunmanChannel awesome man . I'll try it out. I can't even imagine how glossy it would look after a buff and polish. Probably will leave a nice mirror finish.

[@brandonhensen7703]

Gah that stuff looks amazing! Definitely gonna try and order some. Also, you wouldn't happen to remember the paint code on that Jag, would you? Love that green.

[@nickjoiner450]

Thanks for that gunny it's going to help a lot spraying the MG. I now have a better understanding of what I'm going to do. However you said my gti pro with T110 might struggle do you think I would be better of using my gpi for spraying this or 5-10% reducer. Cheers

[@TheGunmanChannel]

Because of the fine atomisation the T110 is a bit slower with thicker clears so I'd stilted the T110 but thin it out 5-10% I'd start by painting a panel that's off the car and see how it goes at 10%

[@paulblick7527]

Hi Gunny another great review. Is this a good product for diyr? What would be a good price to pay if available

[@ajohnssonify]

Hi Gunny! Thanks for your all good vids. I have a question regarding liquid glass. Is it possible to just air dry in 20 degrees? And if, for how long? Best regards, Anders from Sweden

[@salbos3970]

Hey gunny... Nice paint job as always... I have questions..iwata bellaria LV2 what is the best tip 1.3 or 1.4?

[@Mollysworld2013]

As always Gunny top stuff thanks for taking the time to post that review 👍🏻

[@TheGunmanChannel]

I'm glad you appreciated it, thanks for watching mate.

[@Mollysworld2013]

Always Gunny. I’m am slowly watching everything you have recorded before I attempt my respray. I have my FLG 5 arriving this week!

[@Mollysworld2013]

It’s like getting a remote training from you every time I watch!

[@rickreynolds1421]

Always informative. Thank you.

[@vasiliskaradimos]

Hi Gunny...just one question..is this clear crystall like water or is yellow like the other clears?

[@rick9able]

What's the total amount of air used in painting and clear coating a car?

[@jsweeney1983]

Can u use a universal fast thinner with this clear? I bought a kit but no speedster I'm worried about using it without the right thinner

[@punguseki]

Where abouts do you get this in Australia?

[@ChristophersonHo]

does it need to sand down and clear coat and sand down again to get this shine

[@iamyourfuture808]

if you think VHS is looking good ... wait till the betamax version hits !!

[@stevenmiddleton5883]

Great vid Gunny! Where in Perth can we buy this from?

[@kevinhekers2380]

I actualy never used the thack and wack method i am a bit scared to use i think i will get one massive run 😂😂😂😂

[@octagongarage3504]

Went to spray guns direct website to look at this product they say you can oven bake or air dry I do not have a the means of baking what are your experiences with air-dry with this product thanks

[@TheGunmanRAW]

I didn't bake the green fender you saw me spray here and it dried well overnight.

[@octagongarage3504]

@@TheGunmanRAW thank you for the response and information did it flow out just as good as it was baked or is there a difference or evantage to baking it have you experienced any dull out of the clear coat overtime I also was not able to find anything on UV rating thanks

[@TimmeOne1]

I cant find a Supplier in Germany for this Clearcoat. I wanna try it

[@baruchdor]

hi gunman love this video!!!! i dont know why but when i use the quartz liquid glass fest with 5-10+-% with my sata 3000 rp 27-30 psi 1.3 tip 1.5-2 terns in the needle i get solvent pop but i get less if i use 24-26 psi 1.8 tip with my gpi can you take a guess why is that? + i work alot with wood too so if you have any q about wood i love to help (i work with polyester,polyurethane,acrylic...) by the way Liquid Glass is polyester modified acrylic resin

[@shovelhead1998]

Hi Gunny What exactly are the benefits of the 'tack & wack' procedure? Thanks again for all your tips and tricks! Grtzzz

[@TheGunmanChannel]

You shouldn't do it with thinner clears, you should do it with HS clear if there's no thinner in it. It's quicker and more efficient but leaves you with a superior film build than 2 full coats of ms clear. Oh hell, I'll make a video on it 😂

[@shovelhead1998]

@@TheGunmanChannel thanks mate! I'm looking forward to see it! Btw, the first Devilbiss spraygun i bought, was the FLG 5 because of youre recommendation. I'm lovin it and now my business is starting to grow, I'm thinking about getting a GPI for clears... Thanks for helping me out! Grtzzz Frank

[@evojigger]

It's almost too good, makes the rest of the car look shit when doing a few panels lol

[@TheGunmanChannel]

I know, I was thinking the same thing today.

[@petejohnson8769]

where can we get it in oz?

[@scon2006]

You have applied a lot different from what it says on the sprayguns website, is there a reason you have done it your way, and if there are what do you think is wrong with their application, great video thanks

[@TheGunmanRAW]

I just do what I have to to get it looking good, love this clear.

[@pitlion1]

Gunman ,can you please , please do an updated review of the Iwata LPH 400 with a 1.3 before they get older.Thank you Gunny been a subscriber for a long time bud.

[@TheGunmanChannel]

I actually don't have one or know anyone with one but I'll keep it in mind.

[@kosusi2002]

Hi , i see that there are 3 versions of "Quartz Liquid Glass VHS Clear coat" - Standard, Fast and Extra fast; which of them would you recomand? Thank you.

[@TheGunmanRAW]

I guess it depends on what you want to spray and what environment eg temperatures. Are you doing a respray in the Caribbean or doing single panels in Russia?

[@autocrashrepairsfromhome3168]

this looks awesome

[@The_R-n-I_Guy]

Hey Gunny. I'm going to be painting my 96 Buick Roadmaster sedan soon. It's my first real paint job, so I don't expect perfection. I'm doing a color change from dark blue metallic to solid white. I've already done all the body work and it's all under primer except for the jams. I'm gonna be going back over everything thoroughly before I seal and paint it. Any tips or tricks you can give me?

[@TheGunmanRAW]

Watch all Gunman videos and paint some shit 😆

[@_Junkers]

That Audi looks amazing. How much was the shipping?

[@maccas4268]

Have you had any experience with spies? just looking for some thoughts as its what we use at work

[@TheGunmanChannel]

It's identical to Standox, that's what I use, are you using solvent?

[@maccas4268]

The Gunman Water.

[@anssiw737]

Hi gunny! Witch do you like better, ALL Kandy WET WET clear or Quartz Liquid Glass?

[@TheGunmanRAW]

Liquid Glass!!

[@type2523]

How many coats of clearcoat are you applying?1 or more (just not coming it ) and this clearcoat looks awesome

[@gsail6600]

Two, first one 30%. Second one 70%.

[@hankreszka9319]

When you talk how much clear or paint you use, is that the amount before hardener/reducer is added? Or is that ready to spray?

[@TheGunmanChannel]

Ready to spray

[@hankreszka9319]

@@TheGunmanChannel Great. Thanks!

[@certifiedautocarerecovery7429]

Is this clear available in the us?

[@agentx250]

@The Gunman Does this stuff also work with air dry, or is it bake only? The tech sheet doesn't specify but also doesn't list details for air drying.

[@TheGunmanChannel]

It cures overnight, well, it does in Perth. You shouldn't spray any paint below around 5-10°c but anything above will cure overnight.

[@agentx250]

@The Gunman Thanks for the reply, Gunman, and the info. I figure I'll end up spraying on a hotter day, maybe around 26c. I'm just outside Chicago and it stays fairly warm during summer. Thanks again! :)

[@keemoify]

Hey man,ive got a question about will a budget gun like the A.N.I f150 couse orange peel easier than a more expensive gun?

[@TheGunmanRAW]

No, you should see some of the jobs I've done with my F160 Silver.

[@keemoify]

@@TheGunmanRAW ok i will thanks

[@brendenong3773]

What psi do you spray at?

[@user-qs8dv8pt2x]

Standox VOC Xtreme???

[@Hushfset]

I am after a large pot for my devilbiss Sri pro lite micro could you help

[@TheGunmanRAW]

I am pretty sure they have them at spraygunsdirect.co.uk if you cannot find it on their website email Chris and let him know I sent you [e-mail]

[@손정민-v8k]

Awesome outstanding job thanks

[@TheGunmanChannel]

Thanks mate 👊

[@kazek.lakiernik-lechleraut8407]

Super 👍👍👍☺😉!!!

[@MrAutograff]

Kazek u Gunman'a ;) Pozdrawiam

[@WaqasAhmed-kd2zb]

Do it requires sanding after applications.

[@gsail6600]

No

[@kingsolomon_zr7542]

Awesome

[@mactoe1]

What air pressure are you clearing at from the gun?

[@TheGunmanChannel]

29psi

[@mactoe1]

I'm using the exact same spray gun for clear. Great gun. I'm using the TE20 air cap and the 1.3 tip. Is that what you're setup is for clear?

[@TheGunmanChannel]

Yes

[@maseak6744]

Reminds me of standoff premium clear.. looks amazing

[@SSpecialDelivery]

This video is definitely not sponsored

[@TheGunmanChannel]

Product was supplied opinions are my own.

[@MrNero72]

Yeah its made in Germany but I cant buy it online in Germany hahhaha. WUUUUT :O Thanks Gunny for the review!

[@tarasandriychuk8274]

What's the best reflection clear coat you used, and what gun and psi

[@TheGunmanChannel]

This is the best clear I've ever used!! Hard to beat the trusty old DeVilbiss GTI Pro lite TE20 1.3 at 29 psi

[@tomyoung6032]

Do you prefer the te20 over t110 for finish?

[@tarasandriychuk8274]

Yes it's very nice but unfortunately not in the USA any good clear glass brands like it recommended that are in the use

[@davidduran5745]

Taras Andriychuk I can vouch that you can get it in the USA, within a week too, thanks to spray guns direct

[@tarasandriychuk8274]

@@davidduran5745 do u have a website or where from?

[@kolorklash9743]

Hi Do you have a contact such as email for the manufacturer of quartz liquid glass. Interested in becoming a distributor

[@TheGunmanChannel]

Email Chris at [e-mail] let him know I sent you

[@kolorklash9743]

@@TheGunmanChannel thanks man. Keep up the awesome work.

[@suzuklaiv7741]

Class 👏👍👍👍

[@geraldgerald3763]

👍

[@joarizagabria184]

Perfeito 👍

[@mikebonge7206]

Thanks

[@vikingselph5475]

Holy 💩 🦇👨

[@sayyes1481]

First!!

[@georgesmith7743]

I like to call it grip and drip 😂

[@esijamali7304]

E J: 👌👌👌👌👌🇮🇷