Quick Disconnect Bumper Install

This makes removing the front bumper SO much easier.
www.ft86speedfa...
--------
Instagram - / ft86speedfactory
Facebook - / ft86speedfactory

[@Gaammbit]

I saw this on another channel before. But I'm glad you guys are showing it!

[@Scourge1024]

This looks a lot like the Quik-Latch quick disconnect brand. They make the same thing to keep carbureted air filters secured without leaving an exposed bolt or nut showing.

[@davisjones]

I remove my bumper every time I take my BRZ off road. I never plan for it to come off. It just usually ends up that way after it swallows a rock or a bush. 😂

[@cGRipOff]

For sure saving up for these after the current mods I’m saving for! My front bumper has never fit the proper way after having removed it a few times!

[@chichioja2]

eBay $20 bucks.... Same shit

[@waybach]

Wrx? What kind of car?

[@cGRipOff]

subae FR-S

[@SB4me]

What are your thoughts about these quick disconnects being used to install a flat mount carbon fiber rear diffuser? Because the diffuser will mount to the spare tire carrier, it needs to be quick release to remove in the even of a flat for spare tire access. Thanks.

[@I-didnt-ask-you]

Looks very useful but if that price shown is any indication, these are too expensive given the cost of manufacture and materials used which equate to two 4 bolts, a handful of washers and a decorative top. I just cannot personally justify paying more than ¥6000-¥8000 for these. I hope to find them at a lower cost later.

[@wajalama]

I'm pretty sure they sell the same exact thing on ebay for like, $20 bucks haha

[@artbycapone2710]

They look good and all but it seems like people have forgotten that there is military grade quick latch hardware at an affordable price point: DZUS Fastener. They are cheap and work very well. They are also weigh very little.

[@moveoverracing]

@@wajalama no sorry, these particular latches cost $25-35usd each. There are counterfeits of our products so BEWARE, they will only latch a few times and then garbage. The copy cat versions are not covered under our Lifetime Warranty either, so buyers beware we will not replace any counterfeit products. Our Latches are made from CNC Machined T6 6061 Aluminum made in the USA with a Limited Lifetime Warranty

[@moveoverracing]

@@artbycapone2710 The dzus requires a tool to remove every time. At the track we need things done fast and efficiently with the least amount of tools required to take off body parts. An example is that Hypercars like the McLaren P1 GTR use our latches on their body panels. Soon to be used by Lamborghini also

[@PolarVoltic]

$20 rubber band ones that are not as nice, or $215 for something that is nicer but does literally the exact same thing. You decide

[@tony19989]

Where did $215 come from im sorry thats expensive af lol

[@TrojanLube69]

Are the charging for the machine that made them. Like damn haha

[@Leo-im6vv]

dammmm, i think i'll just use some bolts and nuts.

[@Jstars23]

Damn $215 for a $10/$20 kit is a bit expensive 😅

[@W3theDreamrz]

Bro I love you guys and the pricing for most products but your customer service is abysmal. To wait over 24 hours for an email response with no number to call or anything is pretty ridiculous. Not trying to hate I just want you guys to improve you customer experience.

[@alexlozano210]

You think you can do an install and review on the Crawford intake spacers and the torque solutions throttle body spacers?

[@alexlozano210]

Please 😇

[@Austinomon]

Hey so what was the name of the air freshener you guys used to send in with products when we ordered. I have only one left and I’d like to get more

[@slothc7]

Hey, the install manual link is broken on your store page. it just links to an image of the first page of the PDF. not the whole thing. help?

[@jansencunin]

These look a lot like the quik-latch I use on my bumper just way more expensive.

[@CountChokcula]

The poor souls who bought that expensive one probably didn't know any better. The thing probably costed them a few dollars to make

[@itzjordxnhd9850]

Stupid question? But can they hold abit of weight? As my bracket on bumper is basically gone an too weak, an keeps falling

[@Jackelsr]

The document from Move Over Racing now only has the first page, the rest of the document is missing.

[@leekybandz1599]

Quick question bro I have a clk500 and I’m going to be getting a customized after market bumper and I don’t want to have to add brackets and do all the extra work that needs to be done you think if I use this quick release set up the bumper will hold up with just the quick release set up or ?

[@rosarioromero957]

Where can i buy this in the Philippines?

[@romelfrancis7827]

Does this work on any type of cars ?

[@rowanwindsong]

Do you have to reconnect the brackets holding the bumper in the front?

[@thomasjorgenson7101]

nope

[@UNKCEL]

Where did you guys get the angle grommets?

[@NoApparryleDarryle]

Does one side***** Anddddd there you go folks. 😅😅 you’re done. Enjoy the rest of your day. 🐙

[@mojojoji5493]

UNCIVILIZED JAMAICAN haha for when you only need to be half as quick 💀

[@woe794]

Does he really need to do both sides for you?

[@mojojoji5493]

Woe do you really need to make that comment?

[@notme7970]

Hey I’m 17 and getting a brz very soon and I’m stoked! But I’m getting new rims as soon as I get it but I have no clue what im looking for I want wider tired but I have no clue where to start any help would be appreciated, thank you!

[@FTspeed]

The max size we recommend is 18x9.5 +38mm wheel with a 255/35/18 tire. You may also want to watch out wheel fitment guide to get a better understanding of wheel sizes. kzbin.info/www/bejne/oWK3oHWIm9xqoNk

[@alexelder9600]

look up fitment industries they have a huge gallery and help for your exact issue.

[@notme7970]

@@alexelder9600 thank you very much, I appreciate it

[@notme7970]

Update: I got my car and couldn’t be happier, 2013 grey brz with 37k miles got it for 16k and man it was worth it, it’s perfect.😁😁😁

[@9GSR]

I was looking to buy this, but when I saw $215! I backed off, that's A LOT for 4 bolts. I will have to look somewhere else or look another alternative, but I'm not paying $215 for bolts

[@toufuevang4440]

Amazons like $14 for 2 haha

[@ryevdee6064]

You only included 1/20 pages of their install manual on your website btw...

[@Geerice]

How difficult is it to remove the bumper, and how often do you remove it that you find it necessary to install discos?

[@echonomix_]

It's mostly to make sure the bumper fits correctly. If you look at basically ANY FR-S, BRZ, or GT86, you'll see the bumper doesn't fit correctly next to the headlight, in front of the wheel arch. Older models show it worse usually.

[@elibruhim2102]

Hi bro.where can i get that item bro ?

[@OlofTheBald]

Ok but what about the disconnects from Move Bitch Get Out The Way Racing?

[@sickshiftkeylo]

Do you guys sell upgrades for the auto trans

[@PrinceKC22]

By any chance, can you make another one for the rear bumper?

[@FTspeed]

We're going to be running the 2018 brz bumper on this car. Which is the one I installed the quick disconnects on.

[@moveoverracing]

We have those too!

[@RLVOID517]

Did you guys move your warehouse to Utah?

[@FTspeed]

We do have another warehouse in Utah to cut down shipping times. But the shop where we make all our videos is still here in Iowa.

[@esko23q]

Ebay has them for $34 Aud and funny enough they work just as well..

[@nicholassanjayowo8955]

Does this sill work if my bumper is made of iron?

[@moveoverracing]

100%

[@danilkozyatnikov8953]

Awesome video! What about the other bolts. Do these become a quick release, but you still need to unscrew all the rest of it? P.S. Something's off about the video quality.

[@FTspeed]

Depends on what kind of driving you're doing. If you're taking the bumper on and off a frequently, loading the car on a trailer, drifting, taking it off at a show, you could just use the Quick Disconnect mounts, but if you're going to drive for a while on the interstate, there may be some flapping if the under panels aren't tucked in.

[@chimkinnugget5221]

do you get sag on the newer 2017+ cars?

[@FTspeed]

Christopher Hernandez ours doesn’t have it a the moment.

[@noeldriven]

not yet :D got it Oct. 2016

[@sethdaigle2284]

Wow that’s esphensive. I mean, it does look really convenient tho

[@Jjjjjjj750]

Eshhhppenshhhive

[@chitos2132]

Egspencyve

[@treybilbo3385]

its funny cause i think hes trying not to laugh at all the usage of the words balls and rod lmao

[@5theshortone]

$215? i can get the exact thing on amazon for $20

[@patrickvargas8442]

I don’t see where the quality is up to 200 for these

[@ArchDoug]

Does the bumper sag still exist for the 2017+ models? Id love to hear more on your experiences with it and what you do about it

[@FTspeed]

Ours hasnt really had the sag problem, but these quick disconnect would fix it if it did.

[@raulpedraza6416]

I need one for a 370 z

[@williwonka7692]

Thomas the goat

[@donchan1622]

Thank buddy

[@kamerath]

That mark up tho 👀

[@moveoverracing]

Great Video Guys!!!

[@woe794]

Getting my quick releases to unbutton is difficult

[@moveoverracing]

It may simply need adjusting or shoot us an email, we will be happy to help. They come with a Lifetime Warranty. [e-mail]

[@yourboyvic]

I love this video, more like this

[@HospitalMusic]

I gotta do this with my G37

[@jeffcivjeep7]

"quick disconnect" for like, two bolts out of the 16 you have to remove to actually get the bumper off. Just fix the bumper.

[@cheyennebryan2323]

Where are the April products 😭😭😭

[@cheyennebryan2323]

I need that Video Thomas

[@FTspeed]

It’s coming. We’re going out to film the first Gridlife race at Mid Ohio this weekend. So shortly after that

[@captainmcfilthy8569]

This product is $27 at Quik Latch

[@anklebiter2223]

5:24 your only aloud to say that when strapping something to a trailer

[@devisissy1]

$250, screw off!

[@marqevox9745]

They’re rusted bad (after 6 years) and won’t completely come off!! These suck!!

[@WAXWINS]

The profit margins tho.... let me get 50% of the company with 10% royalty for every unit sold or your dead to me

[@hexxedgold2032]

215$ for some bolts and anodised aluminium toppers LMFAO

[@Officialdopestmedia]

Damn I thought I was getting ripped off for some $16 Amazon ones

[@cyrus.gonzales]

Anyone else having issues with their 2013 Scion FR-S and Subaru BRZ after doing the recall?

[@Eblivious]

Cyrus Gonzales my shit had so much smoke from the engine bay, and went inside my car from the vents🤦🏻‍♂️ they told me to drive through it smh

[@mr.wiggles7535]

There are several threads on it the forums. So much so that other sites are starting to pick it up!

[@cyrus.gonzales]

Mr. Wiggles yeah I saw all the forums. I saw it on a Facebook group and on an Instagram as proof. I submitted it all as proof to the dealership.

[@mr.wiggles7535]

@@cyrus.gonzales Just be ready to fight the dealership tooth and nail. They will find any and every reason to avoid fixing their mistake. Even if you show them "proof" it doesn't mean they will accept it.

[@cyrus.gonzales]

Mr. Wiggles yeah they were the last people to touch it. I had no issues until after the recall

[@Aura_nge]

Hell yea!

[@ElReySupr3me]

I'm saving for some milspec hardware. They come with locks

[@dhanssolo]

"Should take an hour and a half" me looking at my audi a4 b5...

[@c_los9796]

That price tho!!!!

[@moveoverracing]

You need the rubber bands then brotha, they're only like 10$ Made in China perfect for your build

[@c_los9796]

No lie I found the same product less the 30 bucks....I was like wtf ft86speedfactory is fucking us up 😂

[@Boqxx]

Bro please nobody buy these from this website 😭 in what world would a couple screws and bolts cost $200. Go to eBay

[@stevie_efbabyy]

af p.s clean

[@juniorgonzalez7825]

$215 dollars for that??? Lmfao yeah fucking right

[@applejack2374]

Wow! $215 for those stupid buttons? I can just buy a brand new bumper!

[@jaredhankins44]

$215... it cost $2 to make...

[@Tewthpaste]

*my $800 dollar bumper is too expensive to install an easy theft system on it. im keeping my screws and nuts. They wont be able to steal that without jacking the car up. $800 dollar just because its true carbon fiber. hit a chunk of ice at 30mph and plow through snow and not even a scratch.*

[@matthewsaunders4698]

Odd flex

[@sydewayzmo3905]

Those cheap shit ass push buttons! Lost a bumper at the track. Cant beat DZUS fasteners

[@BenGT86]

And I am asking myself all the time, why should I do this 😂😂

[@moveoverracing]

On the FT86 platform they're super convenient. Not only do they re-align the bumper properlt you no longer have to remove the side signal light which is a bitch every time you remove and install the bumper. You simply disconnect the wire clip and remove bumper, light stays put

[@Subzero0753]

Too much yak yak

[@statusquoreject]

$200+ and I have to drill holes in my bumper... No thanks

[@FTspeed]

How else do you expect there to be a quick disconnect? 😅

[@statusquoreject]

@@FTspeed the bolts that are already holding the bumper could have been the quick disconnect fitting that way you wouldn't need to drill extra holes. That's how the legit kits do it

[@isaiahcruz724]

215$ for that bro are you serious ebay for life

[@boostedf56]

😂