Quick electric guitar setup on an Ibanez GRGM21

[@Neshek023]

Intonation, set the neck straght, polish the frets, put Ernie Ball 010's , and it rocks!

[@DingoDoggie]

Got the purple one. Replace nut, locking tuners, Plek job by sweetwater, and set of gfs vintage liverpool pickups. Plays like butter. Have 9.5 strings. No tuning issues or buzz. One of my best playing and sounding guitars

[@wob6776]

What nut did you replace it with?

[@layne182]

Replaced the nut with what? Where did you find a replacement?

[@shawnhuff3920]

I bought one candy apple red that same one you have to put 10 or 11 gage strings on it I put locking tuners on and I upgraded the pickups

[@pawnshopguitarguy]

Cool, what pickups did you use?

[@shawnhuff3920]

@@pawnshopguitarguy custom jason Becker pickups I got them at ksm music 🎶in Logan Utah that's my guitar shop

[@olegbaranovskiy]

Thank you. All needed information in one video.

[@pawnshopguitarguy]

You're welcome!

[@piotrmbukowski]

What an awesome vid. Full of practical advice. THANK YOU!!!

[@garaltxabushi8214]

So that's what's wrong with mine I've been looking for answers for awhile I bought the same guitar but mines purple :D I noticed something didn't feel right about it when I played it but didn't know what it was due to it being my first guitar and lack of experience imma try this and fix that buzzing sound finally

[@OatmealRoblox]

I just bought this guitar today! I bought the black color one

[@pawnshopguitarguy]

They're a lot of fun to play - enjoy it!

[@gamer6550]

Getting mine Monday

[@pawnshopguitarguy]

Cool, it's got a great sound

[@bjstein4242]

Love your series.. just discovered it.. love low cost guitars with a little love can be great players.. shouldn't the saddle height match the fretboard radius?..Ibanez?..must be 15 or 16 inch radius??..lol

[@blazekub6609]

nice video man very helpful!

[@gregk8246]

Good video. Anyone know what gauge strings come on this guitar? Mine feel pretty loose and I have a hard time with note accuracy because the notes change so much with pretty minimal fretting pressure. I'm going to move up a gauge but not sure if it has 9s or 10s now.

[@pawnshopguitarguy]

I think they come with 9-42 but I'm not totally sure about that, my buddy uses 10s on the one in the video

[@ricklee9473]

Tuning on mine was bad until I went to 11's. Helped a lot.

[@rogerferrell861]

Mine does to I think its the intenation needs to be adjusted

[@davidsummers5310]

I have bought 2 for my boys, they came with 9s but play and feel much better with 11-52. If I was to use it myself I would use 12s but that was a bit hard on smaller hands, the 11s are fine

[@dixee6498]

Thank you for sharing this video.

[@d.w.103]

Nice video with good info.

[@pawnshopguitarguy]

Thanks!

Very informative video, thanks!. Yesterday I was checking this same model at a store. I was about to buy it when I noticed that when I moved, the guitar made an interference /noise...the vendor tried three different cables and the problem continued. I realized that the jack was ; like a little loose; I mean; It was possible to move a bit the cable that was already inserted; so I thought there was a jack problem and didnt buy it. In your experience, is it worth to buy the guitar and repair the jack later?

[@pawnshopguitarguy]

A jack repair is quite simple if you are proficient with a soldering iron, use it as a bargaining chip to get a lower price. Or at least that's what I would do...

@@pawnshopguitarguy Yes, thats what I thought; I thought to replace the jack, too!! I will find a video here in KZbin to do it myself!! Thanks man!!!

[@ericcoombs]

First thing I noticed the strings are wrapped wrong…

[@rogerferrell861]

Thanks alot I liked and subscribed

[@shubidu2016]

Great Video its very helpful, now i know its not loose. I buy it today. I have the problem on the backside with the skrews, its to deep inside, so could you help me? otherwise i have to bring it back???

[@pawnshopguitarguy]

I'm not sure which screws you are referring to, but I would be glad to help. If the screw heads are stripped there are tools to remove them or if the screws have been over tightened you would need a more in depth repair

[@shubidu2016]

@@pawnshopguitarguy im very thankful, i think i have to go a man who can help. sorry for my english. i mean: die unterlegscheibeb auf der Rückseite am korpus für den hals sind in die aussparrung geschraubt, leider nicht auf dem lich sondern in dem Loch.

[@pawnshopguitarguy]

@@shubidu2016 Those are supposed to be recessed into the body - Diese sollen in den Körper eingelassen werden

[@pawnshopguitarguy]

Versuchen translate.google.com. es ist sehr hilfreich

[@shubidu2016]

@@pawnshopguitarguy ok ibwil try it... otherwise i need a picture from the backside...i cant find some

[@PineconeTheory]

Do you know what size the truss rod and saddle allen keys are? I have to buy them as mine weren't provided. Thanks

[@pawnshopguitarguy]

They should be 4 mm and 1.5 mm respectively, Harbor Freight has a set on a keychain like ring for $2.99 that includes those sizes and more...

[@blakerocknroll413]

Rock on 🤘

[@rogerferrell861]

Where can I get the measuring gages and what ate they called

[@pawnshopguitarguy]

It's a string height gauge and they are around $10 on Amazon or a little more from a guitar store. Also you can use automotive "feeler" gauges to measure the neck relief, the flat types sell for less that $10 at auto parts stores.

[@rogerferrell861]

@@pawnshopguitarguy thanks brother u have been a great help